RS485 Isolator 2 Click features the ADM2867E, a 5.7 kV rms signal and power isolated full duplex RS-485 transceiver from Analog Devices. This full duplex device allows for independent [...]

  TFT Board 4 Capacitive with frame is a 4.3" display board which features the standardized 2x20-pin display connector This display board has a frame that could be used for fastening the [...]

  The Thermo 9 Click is a Click board™ equipped with the TSYS01, a digital temperature sensor from TE Connectivity. The design of the Click board™ itself is such that the thermal radiation [...]

  DC MOTOR 14 Click is a PWM chopper type brushed DC motor driver, labeled as TB67H450FNG. This IC includes one channel of motor output block, using a wide range of supply voltages, while [...]

  TFT Board 5 Capacitive with frame is a 5" display board which features the standardized 2x20-pin display connector. This display board has a frame that could be used for fastening the [...]

  The 6DOF IMU 10 Click is a Click board™ which features the KMX62-1031, a 6 Degrees-of-Freedom inertial sensor system that features 16-bit digital outputs accessed through I2C communication f [...]

  TFT Board 7 Capacitive with frame is a 7" display board which features the standardized 2x20-pin display connector. This display board has a frame that could be used for fastening the [...]

  NFC Extend Click is a NFC tag device with possibility of using any shape and size external antenna, offering 16 Kbit of electrically erasable programmable memory (EEPROM). This Click [...]

  The CAN FD Click is a transceiver designed for HS CAN networks up to 5 Mbit/s in automotive and industrial applications. As an interface between the physical bus layer and the CAN [...]

  LPCXpresso Click Shield is designed to support multiple NXP development platforms which use Arduino connector and equip them with two mikroBUS sockets. Start your development with ease on [...]

  One Shot Click is a monostable multivibrator (also known as a “one-shot” pulse generator) with a programmable pulse width of 1μs to 33.6 seconds. The LTC6993-2 is a crucial part of the On [...]

  The MUX 3 click is a Click board™ based around the TMUX1208 module, a 5-V Bidirectional 8:1, 1-Channel Multiplexer from Texas Instruments. Given its features the MUX 3 click is ideal for [...]

  Today, our trustworthy presenter Stefan, provides our loyal viewers with useful information regarding the RGB Driver Click, and the LightRanger 3 Click, with the help of a very special [...]

  These new products that have adopted the mikroBUS™ standard are the AVR-BLE Development Board and the PIC-BLE Development Board from Microchip. Our business relationship with Microchip is [...]

  FT Click is a compact, smart transceiver add-on board that helps you add a Free Topology (FT) interface to any host board that has adopted the mikroBUS™ standard. The FT Click, because of [...]

  One very important change to our position has been made – we will be presenting at Hall 4A/stand 4A-128. We are still very honored to participate in the upcoming Embedded World con [...]

  Today, our trustworthy presenter Stefan, delves into the intricacies of the NFC Extend Click. This Click board™ is NFC tag interface device with possibility of using any shape and size ex [...]

  Love is in the air! Because of that, we have prepared a heartwarming offer for our loyal fans! So, we are here to ask you – would you be our Valentine? Starting now you can buy 14 d [...]

  This is a beginner project that can be done in two hours if you have the specified materials and if you follow this useful tutorial. The project we are talking about is titled IoT [...]

  This is a beginner project that can be done in three hours if you have the specified materials and if you follow this useful tutorial. The project we are talking about is titled Garage [...]