TFT Board 5 Capacitive with bezel is a 5" display board which features the standardized 2x20-pin display connector. This display has an aesthetically pleasing bezel around it, and it [...]

  Heater Click is useful tool for some projects and products that require some kind of heating. It is used whether to prevent electronics from becoming too cold, to help control humidity, [...]

  Build great GUI with ease by using our mikromedia 4 for STM32F4 CAPACITIVE FPI with bezel! This compact FPI (Front Panel Integration) development board is designed as the complete [...]

FT Click is a compact, smart transceiver add-on board that helps you add a Free Topology (FT) interface to any host board that has adopted the mikroBUS™ standard. The FT Click, because of its [...]

  The Ambient 11 Click is a Click board™ equipped with the VEML6035, a low power, high sensitivity, I2C ambient light sensor from Vishay Semiconductors. Because of the possibilities its fe [...]

  TFT Board 7 Capacitive with bezel is a 7" display board which features the standardized 2x20-pin display connector. This display has an aesthetically pleasing bezel around it, and it [...]

  Proximity 13 Click is based on the SI1153-AB09-GMR IC from Silicon Labs that can be used as an proximity, and gesture detector with I2C digital interface and programmable-event interrupt [...]

  Build great GUI with ease by using our mikromedia 5 for STM32F4 CAPACITIVE FPI with frame! This compact FPI (Front Panel Integration) development board is designed as the complete [...]

  AD-SDIO 2 Click is a Click board™ equipped with the AD74413R, from Analog Devices. The AD74413R is a quad-channel software configurable input/output solution for building and process co [...]

  Build great GUI with ease by using our mikromedia 5 for STM32F4 CAPACITIVE FPI with bezel! This compact FPI (Front Panel Integration) development board is designed as the complete [...]

  TFT Board 3 Capacitive with frame is a 3.5" display board which features the standardized 2x20-pin display connector. This display board has a frame that could be used for fastening the [...]

  RS485 Isolator 2 Click features the ADM2867E, a 5.7 kV rms signal and power isolated full duplex RS-485 transceiver from Analog Devices. This full duplex device allows for independent [...]

  FT Click is a compact, smart transceiver add-on board that helps you add a Free Topology (FT) interface to any host board that has adopted the mikroBUS™ standard. The FT Click, because of [...]

  One very important change to our position has been made – we will be presenting at Hall 4A/stand 4A-128. We are still very honored to participate in the upcoming Embedded World con [...]

  Today, our trustworthy presenter Stefan, delves into the intricacies of the NFC Extend Click. This Click board™ is NFC tag interface device with possibility of using any shape and size ex [...]

  Love is in the air! Because of that, we have prepared a heartwarming offer for our loyal fans! So, we are here to ask you – would you be our Valentine? Starting now you can buy 14 d [...]

  This is a beginner project that can be done in two hours if you have the specified materials and if you follow this useful tutorial. The project we are talking about is titled IoT [...]

  This is a beginner project that can be done in three hours if you have the specified materials and if you follow this useful tutorial. The project we are talking about is titled Garage [...]

  A rather unusual project! Check out this older but useful tutorial and make it happen! The project we are talking about is named Flip and Click „Theremin“ and it was created and publ [...]

  Our YouTube channel is back in business! It has always been around but now we are going to really utilize and promote it with new and fresh ideas. The first of many more videos to [...]