Status:Pre-orderAvailable from 06/10/2018
The board carries the CEC1702 from Microchip, a 32-bit ARM® Cortex™ -M4 Processor Core, with strong cryptographic support.
Thousands of possibilities with click boards. With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 400 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away.
Programming. Clicker 2 for CEC1702 is shipped without the Bootloader and the appropriate eFUSE settings (factory default). To be able to program clicker 2 for CEC1702 follow the steps explained on CEC1702 Specifics in the Help section of the ARM compilers, under "OTP Programming the CEC1702 device". You can download the Bootloader from the link.
Power Management. Clicker 2 for CEC1702 features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.
Use one of these, or try some of the possible combinations. All click boards™ are compatible.
The CEC1702 provides a high level of security features, it's a microcontroller with a complete hardware cryptography-enabled solution. It delivers a multi-dimensional defense against attacks, including:
The CEC1702 is a full-featured ARM® Cortex®-M7-based microcontroller with a complete hardware cryptography-enabled solution in a single package. This low-power but powerful, programmable 32-bit microcontroller offers easy-to-use encryption, authentication, private and public key capabilities and allows customer programming flexibility to minimize customer risk.
Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for CEC1702 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).
- CEC1702 has 128 KB SRAM
- 64 KB boot ROM
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- Micro USB connector
No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
To make your prototyping experience as convenient as possible, clicker 2 for CEC1702 is preprogrammed with a UART bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware.
Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for CEC1702. It’s a fast hardware debugger and programmer that exploits the MCU’s integrated encryption module, enabling secure firmware updating.
|Applications||This compact board brings flexibility of click add-on boards to your favorite microcontroller, making it a perfect starter kit for implementing your ideas|
|MCU Memory||480KB of SRAM|
|On-board modules||2 x LEDs, 2 x push buttons, 1 x reset button|
|Key Features||LTC®3586 - power management and battery charger IC|
|Expandability||2 x mikroBUS sockets, two 1x26 mikromedia-compatible headers|