Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
RS485 Isolator 3 Click is a compact add-on board that provides electrical isolation and signal conditioning for RS485 communication systems. This board features the ADM2763E, a 500kbps, 5.7kV RMS, signal-isolated RS-485 transceiver from Analog Devices. The ADM2763E is protected against ≥±12 kV contact and ≥±15 kV air IEC 61000-4-2 electrostatic discharge (ESD) events on the RS485 A, B, Y, and Z pins. Besides receiver/driver control pins, it also features a receiver cable invert pin to quickly correct the reversed cable connection on the A and B receiver bus pins while maintaining complete receiver fail-safe performance. This Click board™ is suitable for many industrial and automation applications that require insulation against working voltages of 1060V RMS and 1500VDC for the device's lifetime.
RS485 Isolator 3 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-5597$32.00
Battery Holder for CR2032 represents a unique battery holder (SN2032) that allows you to maintain good contact with the battery and facilitates simple replacement. This battery holder is suitable for a non-rechargeable (primary) coin-cell battery, CR2032 lithium coin cell battery (20mm diameter x 3.2mm thickness). The SN2032 comes with three mounting pads for direct soldering on the PCB, which turns it into an easy-to-connect solution perfect for devices with a voltage of 3V and a capacity of 210mAh.
NOTE:This battery holder can also be found in an embedded format in combination with the RTC 2 Click board™. For more information about this Click board™, visit the RTC 2 Click product page.
MIKROE-5518$1.80
SMA to BNC Adapter provides seamless interconnection for devices with SMA male and BNC female interfaces. This high-performance connector ensures reliable signal integrity with a 50Ohm impedance and supports up to 4GHz frequencies. Gold-plated center contact minimizes signal loss, while the nickel-plated brass body enhances durability. This adapter simplifies interconnection for various applications, making it essential for test labs and field environments.
For example, the SMA male to BNC female adapter can be used to connect the plastic pH electrode (BNC female) to the EZO Carrier Click - pH (SMA male).
MIKROE-5984$13.20
Inclinometer 4 Click is a compact add-on board designed to measure angles of slope or elevation of an object concerning gravity's direction. This board features the FXLS8971CF, a 3-axis low-g MEMS accelerometer from NXP Semiconductor. The FXLS8971CF offers high-performance and low-power modes, with selectable full-scale ranges of ±2/4/8/16g and features such as selectable output data rates, motion detection, and a 144-byte output data buffer. This Click board™ supports both I2C and SPI interfaces with a unique "Click Snap" feature for flexible implementation. It is ideal for industrial and medical IoT applications, including asset tracking, equipment monitoring, smart metering, and orientation detection.
Inclinometer 4 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board, alongside a Click Snap feature introducing a new level of flexibility and ease of use.
NOTE: This Click board™ alongside FXLS8971CF, also represents reference design for FXLS8961AF.
MIKROE-6259$11.00