Go to Cloud (G2C) Click
Filter Product By
Slide and select filter/s
USB UART 5 Click is a compact add-on board with a general-purpose USB to UART serial interface. This board features the CP2110, a highly-integrated USB-to-UART bridge controller from Silicon Labs. The CP2110 uses the standard USB HID device class, requiring no custom driver and a UART interface that implements all RS-232 signals, including control and hardware handshaking, so existing system firmware does not need to be modified. The UART capabilities of the CP2110 also include baud rate support from 300 to 1Mbps, hardware flow control, RS-485 support, and GPIO signals that are user-defined for status and control information. This Click board™ is designed to quickly add a USB 2.0 full-speed compliant UART interface for custom applications.
USB UART 5 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin number and compatibility. MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to support even MCUs with extremely high pin count. Their clever design allows very simple usage, following the well-established plug & play concept of the Click board™ line of product.
WiFi Plus Click is a compact add-on board providing a low-power WiFi solution. This board features the MRF24WB0MA, a 2.4GHz, IEEE standard 802.11b/g/n compliant RF transceiver from Microchip. The MRF24WB0MA comes with an integrated antenna, with a range of up to 400m, and a place for a u.Fl connector. It is characterized by low power consumption and built-in hardware support for AES and TKIP (WEP, WPA, and WPA2 security). WiFi Plus Click also features an MCW1001 companion controller, also from Microchip, with an onboard TCP/IP stack and 802.11 connection manager, which in combination with MRF24WB0MA, results in support for IEEE Standard 802.11 and IP services. This Click board™ is suitable for highly integrated and cost-effective applications, industrial wireless control, smart home applications, utility and smart energy, remote device management, and more.
WiFi Plus Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.