Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
Fiber Opt Click is a compact add-on board that adds fiber-optic communication to your design. This board features one IF-D91, a fiber-optic photodiode, and one IF-E97, a fiber-optic LED, both from Industrial Fiber Optics. It provides a plastic optic connection feature over a plastic fiber cable with data rates of up to 512Kbps. Received data from the IF-D91 photodiode is filtered and amplified through dual operational amplifier, the MCP6284 from Microchip, and sent for further processing via selected mikroBUS™ lines. This Click board™ makes the perfect solution for high-speed digital data links, local area networks, video links, EMC/EMI signal isolation, fiber optic modems, and more.
Fiber Opt Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-1940$41.00
SpeakUp 2 Click is a compact add-on board providing an offline speech recognition solution. This board features the FT900Q, a microcontroller from FTDI Chip. The SpeakUp 2 Click can be set to recognize up to 100 voice commands and have the FT900Q carry them out instantly. The FT900Q, which has stored voice commands, compares them with those received from the microphone, sends the data to the host MCU, or executes the command, thus enabling this board to act as a stand-alone solution. This Click board™ makes the perfect solution for the development of voice-controlled applications, home automation, or any human-machine interface.
SpeakUp 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-2375$41.00
AM/FM 2 Click is a compact add-on board that can be used to listen to music from the AM and FM radio bands. This board features the Si4732, a broadcast AM/FM/SE/LW/RDS radio receiver from Skyworks. This radio receiver integrates the complete broadcast tuner and receiver function from antenna input to digital audio output. In addition to the radio receiver, this Click board™ is equipped with the LM4910, a Boomer output capacitor-less stereo 35mW headphone amplifier from Texas Instruments. This amplifier can deliver 35mW of continuous average power to a 32Ω load with less than 1% distortion. This Click board™ makes the perfect solution for the development of table and portable radios, mini/micro systems, stereo boom boxes, and more.
AM/FM 2 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-5793$29.00
Two-Wire ETH Click is a compact add-on board with the purpose of a generic interface to many third-party processors in 10BASE-T1S applications. This board features the LAN8651B1-E/LM, a low-power single-port 10BASE-T1S MAC-PHY Ethernet Controller with SPI from Microchip. The LAN8651B1-E/LM combines a Media Access Controller (MAC) and an Ethernet PHY to enable low-cost MCUs access to 10BASE-T1S networks (allows for creating both multidrop and point-to-point network topologies). The simultaneous transfer of both Ethernet transmit and receive packets between the station controller and the LAN8651B1-E/LM is performed over a high-speed Serial Peripheral Interface (SPI), according to the OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface specification. This Click board™ is suitable for functional safety-related applications such as industrial control, process/factory automation, sensor/actuator networks operating at high bandwidth, building automation, and more.
Two-Wire ETH Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-5543$50.00
