Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
I2C Repeater Click is a compact add-on board that extends and accelerates I2C communication between two buses, providing voltage-level translation, buffering, and improved signal integrity for high-speed applications. It is based on the NCA9700, a dual-channel bidirectional level translating I2C bus repeater and accelerator from NXP optimized for Fast-mode Plus operation up to 1MHz. This IC features integrated edge accelerators that speed up the LOW-to-HIGH transitions of SCL and SDA signals, buffers both clock and data lines, and enables up or down voltage translation between port A and port B with independent operation from 1.08V to 3.6V. Each I/O pin integrates 4.3kΩ pull-up resistors while allowing additional ones to further improve rise times. The board features MIKROE’s Click Snap format enabling the main circuit area to be detached and used autonomously through direct pin access. This makes I2C Repeater Click ideal for smartphones, tablets, portable medical devices, instrumentation, IoT products, and other power-sensitive applications requiring robust and accelerated I2C communication.
I2C Repeater Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to automatically detect and identify this add-on board, alongside a Click Snap feature introducing a new level of flexibility and ease of use.
MIKROE-6785$11.00
EEPROM 17 Click is a compact add-on board designed for reliable non-volatile data storage, ideal for preserving critical information such as system configurations, logs, and calibration data in embedded applications. This board features the M24C04-R, a 4Kbit serial I2C EEPROM from STMicroelectronics. The EEPROM features a 512-byte memory array with a 16-byte page size, supports random and sequential read modes, and enables byte and page writes in under 5ms. It includes a hardware write protection pin (WC), configurable I2C address via onboard jumper, and supports communication speeds up to 400kHz. A unique "Click Snap" design allows detaching the EEPROM section for flexible placement, with accessible IC pins and a fixed mounting hole for standalone use. EEPROM 17 Click is ideal for applications requiring long-term data retention and high write endurance, such as industrial controllers, IoT devices, or automotive systems.
EEPROM 17 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to automatically detect and identify this add-on board, alongside a Click Snap feature introducing a new level of flexibility and ease of use.
MIKROE-6641$9.00
16x12 R Click is a compact add-on board that integrates a 16x12 red LED display, providing full individual control of each LED for ON/OFF switching and brightness adjustment, making it an ideal solution for visual indicators, status displays, and animation effects. It is based on the IS31FL3733 matrix driver from ISSI, a 12×16 LEDs driver with a 1/12 cycle rate that enables reliable LED matrix control. Each of the 192 LEDs can be dimmed individually with 8-bit PWM data, offering 256 steps of linear dimming resolution, while communication with the host MCU is performed via an I2C interface supporting up to Fast-Mode Plus operation. 16x12 R Click is most suitable for applications such as information panels, gaming devices, audio spectrum visualizations, counters, and notification systems requiring LED matrix management.
16x12 R Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to automatically detect and identify this add-on board.
MIKROE-6669$45.00
