Development Boards
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
Circular UHF RFID Antenna is a unique PCB near field antenna designed to be used as an extension of development boards that uses electromagnetic field most suitable for short range communication. The antenna is designed in a circular shape with a diameter of 23mm. It's important to mention that this antenna can be used for UHF and RFID applications that operate in a frequency range from 902MHz up to 928MHz.
MIKROE-4503$10.80
RJ45 Ethernet Jack with LEDs (LPJ0026GENL) is eight-pin 2.54mm pitch RJ45 connector (the abbreviation, RJ45, stands for Registered Jack-45) from LINK-PP used for standard networking cable. The LPJ0026GENL complies with the IEEE802.3u and FCC standards requirement and is compatible with the design for 10/100 BASE transmission over UTP-5 cable. It also has an Ethernet-activity LED, indicating an active port connection. Based on their compact design and dimensions, 21.3 x 15.9 x 13.5 millimeters (L x W x H), this connector is the most often used for applications like 10/100/1000M net cards, USB Hub, network switches, routers, fiber optic transceivers, and more.
MIKROE-5566$2.64
AM/FM 2 Click is a compact add-on board that can be used to listen to music from the AM and FM radio bands. This board features the Si4732, a broadcast AM/FM/SE/LW/RDS radio receiver from Skyworks. This radio receiver integrates the complete broadcast tuner and receiver function from antenna input to digital audio output. In addition to the radio receiver, this Click board™ is equipped with the LM4910, a Boomer output capacitor-less stereo 35mW headphone amplifier from Texas Instruments. This amplifier can deliver 35mW of continuous average power to a 32Ω load with less than 1% distortion. This Click board™ makes the perfect solution for the development of table and portable radios, mini/micro systems, stereo boom boxes, and more.
AM/FM 2 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-5793$29.00
DC Motor Click is a compact add-on board with a brushed DC motor driver. This board features the DRV8833, an H-bridge motor driver with current-control PWM circuitry from Texas Instruments. The DRV8833 has two integrated H-bridges connected in parallel for double the current of a single H-bridge rated for an operating voltage range from 3V to 10V with simple PWM and GPIO control. It also has a complete set of diagnostic (fault indication) and protection capabilities that support robust and reliable operation, like over-current protection, short circuit protection, under voltage lockout, and overtemperature. This Click board™ is suitable for driving DC brushed motors for toys, printers, and other mechatronic applications.
DC Motor Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-1526$22.00
