Universal Boards
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
LTE IoT 10 Click is a compact add-on board that provides reliable LTE-M and NB-IoT connectivity for industrial and commercial IoT applications. This board features the Monarch 2 GM02S, a dual-mode LTE-M/NB-IoT module from Sequans (based on Sequans SQN3430 Chipset), offering global band support from 617MHz to 2.2GHz (covering bands 1,2,3,4,5,8,12,13,14,17,18,19,20,25,26,28,66,85). The GM02S module is 3GPP LTE Release 14 (upgradable to Release 17), embedded IP stack with multiple protocol support including PPP. It enables quick switching between LTE-M and NB-IoT modes for attaching to LTE live network or test equipment (CMW500 or similar). It includes UART interface for debugging and firmware upgrades. Additional features include a wake button, reset functionality, visual status indicators, an SMA connector for LTE antennas, and a micro SIM card slot. LTE IoT 10 Click is ideal for smart meters, industrial sensors, asset tracking, smart home and city applications, wearables, and healthcare monitoring solutions requiring power-efficient cellular IoT connectivity.
LTE IoT 10 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-6563$95.00
Stepper click is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A3967 IC from Allegro Microsystems with proprietary Satlington™ sink drivers on its outputs, which ensure high efficiency and reliable operation of the internal H-Bridges. This IC has the integrated translation section, used to simplify the control: using simple step control inputs from the host MCU, the stepper motor can be driven in both directions, with the predetermined step sizes. In addition, the output current is regulated allowing for noiseless operation of the stepper motor, with no resonance and ringing typically observed at unregulated stepper driver designs.
MIKROE-1528$14.30
I2C MUX 3 Click is a compact add-on board that contains eight bidirectional translating switches dedicated for applications with I2C slave address conflicts. This board features the TCA9548APWR, a low voltage 8-channel I2C bus switch with an active-low reset input from Texas Instruments. It possesses three programmable address pins that allow up to eight TCA9548APWR devices, supports hot insertion, has a low Stand-by current, and no glitch during Power-Up with all switch channels deselected. This Click board™ is suitable to work with I2C interfaces for applications such as fault isolation, address conflict, level translation, or broadcast communication (servers, routers...).
I2C MUX 3 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-4262$25.00
NFC Tag Click is a compact add-on board that provides NFC/RFID tag reading and writing capabilities. This board features the M24SR64-Y, a dynamic NFC/RFID tag IC with 64Kbit EEPROM from STMicroelectronics. The RF protocol is compatible with both NFC Forum Type 4 Tag and ISO/IEC 14443 Type A. There are three ways to operate NFC Tag Click: from an I2C interface, by a 13.56MHz RFID reader, or from an NFC-enabled smartphone, tablet, or similar device. This Click board™ makes the perfect solution for developing mobile payment systems (for example, charging fares in public transport) or for any other short-range wireless data exchange.
MIKROE-1726$14.00
