RISC-V (32bit)
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
CAN SPI Click 3.3V is a compact add-on board that provides a complete CAN solution and can be used as a control node in a CAN network. This board features the MCP2515, a stand-alone CAN controller with an SPI interface from Microchip. This Click board™ also uses the SN65HVD230, a CAN Bus transceiver from Texas Instruments, as an interface between an MCP2515 CAN protocol controller and the physical two-wire CAN bus. This Click board™ makes the perfect solution for developing industrial automation, home automation, and the automotive and mobile machine industry.
CAN SPI Click 3.3V Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-986$25.00
I2C 1-Wire Click is a compact add-on board that performs bidirectional conversions between I2C master and 1-Wire slave devices. This board features the DS2482-800, an 8-channel 1-Wire master device from Analog Devices. The DS2482-800 interfaces directly to the Standard (100kHz max) or Fast Mode (400kHz max) I2C master to perform bidirectional protocol conversion between the I2C master and any downstream 1-Wire slave devices. Internal factory-trimmed timers relieve the host MCU from generating time-critical 1-Wire waveforms, supporting both Standard and Overdrive 1-Wire communication speeds. This Click board™ is suitable for controlling up to eight 1-Wire devices through a single I2C interface, such as EEPROMs, temperature sensors, and similar devices with momentary high source current modes.
I2C 1-Wire Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-1892$34.00
The mikroBoard is miniature development tool which includes microcontroller, programer, small proto board and two 2x40 female headers for connection with UNI-DS6 development system.
MIKROE-706$66.00
WiFi 7 Click is a compact add-on board with a wireless combo module. This board features the ATWINC1510-MR210PB, an IEEE 802.11 b/g/n IoT Module from Microchip. The module uses an onboard printed PCB antenna to communicate with other WiFi devices over the 2.4GHz ISM band. It integrates the network IP stack to minimize host MCU requirements. This includes TCP, UDP, DHCP, ARP, HTTP, SSL, and DNS. The antenna supports a single stream (1x1) in 20MHz with a maximum data rate of up to 72.2Mbps. This Click board™ makes the perfect solution for the development of highly integrated, cost-effective applications that require wireless communication, such as IoT devices, industrial wireless control, smart home devices, and more.
MIKROE-2046$35.00
