Click Boards
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
ECG Click is a compact add-on board that measures the electrical activity of a beating heart through electrodes taped to the skin. This board features two MCP609s, a micropower CMOS operational amplifier from Microchip. The ECG Click is an ECG (or EKG) machine on a Click board™ and requires little setup, and the final measurement results can be displayed as an Electrocardiogram using a free Windows app. The minimal setup requires cable and electrodes, which MIKROE offers as an ECG Click bundle (https://www.mikroe.com/ecg-click-bundle). Of course, you will also need a target board with an MCU with at least a 10-bit ADC (preferably powered by an external battery). This Click board™ makes the perfect solution for the development of health-tracking and fitness devices, quantified-self wearables, portable battery-powered Holter, or you can make an LED blink in sync with your heart.
ECG Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
NOTE: This Click board™ is a development and prototyping tool only. It is not certified for clinical use and must not be used for diagnosing or treating medical conditions.
MIKROE-2455$47.00
dsPIC-Ready1 Board provides the best solution for fast and simple development of 40-pin dsPIC30F microcontroller applications (dsPIC30F3011 and dsPIC30F4011). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other additional devices. There are also IDC10 connectors linked to the microcontroller pins provided on the board. They enable many peripheral modules to be connected to the board, so you can quickly assemble functional working environment that perfectly suits your needs.
dsPIC-REady1 Board features a USB to serial UART interface FT232R which simplifies USB to serial designs and reduces external component count by integrating an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal into the device.
Note: dsPIC MCU and dsPICprog programmer are not included in the price!
MIKROE-449$35.00
NDIR CO2 click is an advanced integrated CO2 gas sensor system, which is able to measure an absolute CO2 concentration, by utilizing the CDM7160 integrated sensor. This sensor is based on nondispersive infrared sensing principle (NDIR), with two detection elements: one is used for detecting the wavelength of the IR light spectrum, affected by the CO2 gas, while the other detects the wavelength of the IR light spectrum not affected by the CO2 gas. The integrated MCU processes the readings and outputs the absolute CO2 gas concentration value through UART or I2C interface. Dual wavelength sensing method allows not only accurate absolute readings, but also provides immunity against dust pollution, providing consistent readings in corrosive atmosphere, variable ambient temperature, and over longer periods of time.
MIKROE-3134$149.00
