Temperature & humidity
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
Keylock click carries a processed sealed key lock mechanism that can be set in three different positions. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the PWM, INT, and AN pin on the mikroBUS™ line.
The click board™ comes with two keys and a protective cap for the mechanism.
MIKROE-2564$27.00
LED Driver 13 Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the A80604-1, a 4-channel LED driver designed at a switching frequency of 400kHz that provides 150mA per channel from Allegro Microsystems. It is powered by an external power supply in the range of 6V to 18V, providing an output voltage of approximately 26V, which is used to power LEDs connected to LED channels. On the logical side, this board uses both 3V3 and 5V with mikroBUS™ power rails and communicates with the MCU via GPIO pins. In addition, the user is given the option of analog or digital LED dimming selection, using a PWM pin from the mikroBUS™ socket or via an onboard potentiometer/external PWM signal. This Click board™ is suitable for various automotive applications, such as infotainment backlighting, interior/exterior lighting, heads-up display, and more.
LED Driver 13 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-4965$30.00
Tilt Click is a compact add-on board that provides positional feedback for left, right, backward or forward movement (tilt). This board features the RPI-1035, a four-directional optical tilt sensor from ROHM Semiconductor. Compared to mechanical and magnetic-based solutions, this optical direction detector is less prone to noise caused by vibrations and is non-influenced by magnetic disturbances. Communicating with the host MCU through the two mikroBUS™ lines, the Tilt Click also comes with two onboard LEDs providing visual feedback from the sensor. This Click board™ is suitable in cases where it is only necessary to detect the direction of movement.
Tilt Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-1834$15.00
