Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
dsPIC-Ready1 Board provides the best solution for fast and simple development of 40-pin dsPIC30F microcontroller applications (dsPIC30F3011 and dsPIC30F4011). It includes connectors for connecting the dsPICprog with mikroICD in-system stand-alone programmer. These connectors enable you to program microcontrollers without any other additional devices. There are also IDC10 connectors linked to the microcontroller pins provided on the board. They enable many peripheral modules to be connected to the board, so you can quickly assemble functional working environment that perfectly suits your needs.
dsPIC-REady1 Board features a USB to serial UART interface FT232R which simplifies USB to serial designs and reduces external component count by integrating an external EEPROM, USB termination resistors and a clock circuit requiring no external crystal into the device.
Note: dsPIC MCU and dsPICprog programmer are not included in the price!
MIKROE-449$35.00
The RFid Reader Board offers an effective and low-cost solution for connecting your prototype device to an RFid reader. The RFid reader can be used in a variety of applications. Use this board to create RFid supported devices in a jiffy.
MIKROE-262$29.00
SPI Isolator Click is a compact add-on board with a digital isolator optimized for a serial peripheral interface. This board features the ADuM4154, a 5kV digital isolator optimized for a serial peripheral interface (SPI) from Analog Devices. Based on the iCoupler® chip scale transformer technology, the low propagation delay and jitter in the SCLK, SI, SO, and SSS SPI bus signals support SPI clock rates of up to 17MHz.It also provides a slave select multiplexing system that allows up to four slave devices to be serviced from one isolator. When a target slave is selected, the slave select signal propagates to the desired output with low propagation delay, allowing tight timing control. This Click board™ is suitable for general SPI-bus isolation, industrial automation systems, sensor isolation, and many other applications.
SPI Isolator Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-2583$35.00
XBee 4 Click is a compact add-on board for reliable wireless communication in industrial and commercial applications. This board features the XBRR-24Z8, a Zigbee 3.0 module from DIGI International, featuring a Silicon Labs EFR32MG transceiver chipset for efficient data transmission. Operating at 2.4GHz, it supports Zigbee Mesh networking, Bluetooth® Low Energy (BLE) 4.2, and offers a maximum RF data rate of 250Kbps with a serial speed of up to 1Mbps. It ensures strong and stable connectivity with an indoor range of up to 60m and an outdoor line-of-sight range of 1200m. The board communicates with the host MCU via UART or SPI interfaces, includes hardware flow control, and features LED indicators for status monitoring and a button for commissioning. XBee 4 Click is ideal for building automation, smart energy management, industrial monitoring, and intelligent lighting systems.
XBee 4 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-6491$69.00
