Audio & Voice
Filter Product By
Slide and select filter/s
Filtered by
Categories
Loading
Load more
Loading
Viewed products
Platinum resistance temperature sensor
PT100 3-wire temperature probe is a type of RTD platinum probe used to measure temperatures up to 250°C. This type of probe can be used with RTD click.
RTD sensors are basically thermosensitive resistors – materials that change the resistance depending on their temperature. In this case, the resistor is a small strip of platinum with a resistance of 100Ω at 0°C - that is why it is called PT100.
MIKROE-2885$13.20
NFC Tag 2 Click is a compact add-on board that contains a compact NFC tag IC. This board features the NT3H2111, an energy-harvesting NFC Forum Type 2 tag from NXP Semiconductor. It combines a passive NFC interface with the I2C interface, password protection, and energy harvesting. The NFC IC has built-in 888 bytes of EEPROM user memory and 64 bytes of SRAM for transferring data between the NFC and the I2C interfaces with a memory mirror or pass-through mode. This Click board™ makes the perfect solution for the development of home automation, consumer applications, fitness equipment, meters, electronic shelf labels, and more.
NFC Tag 2 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-2462$14.00
Stepper click is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A3967 IC from Allegro Microsystems with proprietary Satlington™ sink drivers on its outputs, which ensure high efficiency and reliable operation of the internal H-Bridges. This IC has the integrated translation section, used to simplify the control: using simple step control inputs from the host MCU, the stepper motor can be driven in both directions, with the predetermined step sizes. In addition, the output current is regulated allowing for noiseless operation of the stepper motor, with no resonance and ringing typically observed at unregulated stepper driver designs.
MIKROE-1528$14.30
Tilt 5 Click is a compact add-on board for precise tilt detection in various motion-based applications. This board features the RBS240100T, a ball-contact tilt sensor switch from OncQue, capable of detecting a 45° tilt within a full 360° radius. The sensor operates in a normally open switch state, ensuring low power consumption while offering a contact resistance of 50mΩ, insulation resistance of 50MΩ, and a maximum contact current of 10mA. It uses a single INT pin for communication with the host MCU, providing a reliable tilt detection signal, while an onboard orange LD2 LED offers visual feedback. The board also supports the innovative Click Snap feature, allowing the sensor area to be detached for flexible integration. Tilt 5 Click is ideal for security systems, anti-theft and anti-tamper devices, alarm systems, earthquake detection units, and power-saving wake-up mechanisms.
Tilt 5 Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board, alongside a Click Snap feature introducing a new level of flexibility and ease of use.
MIKROE-6567$45.00
