Electric Magnetic Valve G3/4 FPD (FPD-270A) is a compact, all-copper, normally closed solenoid valve designed for water inlet control in home appliances and industrial systems. It operates on DC 12V, supports pressures from 0.02 to 0.8MPa, and handles flow rates up to 15 L/min. With high durability (50,000 cycles), strong pressure resistance (2MPa), and...
Charger 29 Click is a compact add-on board designed for single-cell battery charging and power path management in low-power, portable applications. It is based on the BQ25188 linear battery charger IC from Texas Instruments. This Click board™ supports fast charge currents from 5mA to 1A and system loads up to 3A, with ultra-low quiescent current to extend...
Cap Slider 3 Click is a compact add-on board that provides a reliable capacitive sliding interface for touch-based control applications, ideal for implementing gesture-based user input in embedded systems. It is based on the IQS323, a highly flexible ProxFusion® sensor fusion IC from Azoteq, optimized for detecting slide gestures in both UP and DOWN...
EEPROM 17 Click is a compact add-on board designed for reliable non-volatile data storage, ideal for preserving critical information such as system configurations, logs, and calibration data in embedded applications. This board features the M24C04-R, a 4Kbit serial I2C EEPROM from STMicroelectronics. The EEPROM features a 512-byte memory array with a...
BT Audio 4 Click is a compact add-on board designed to provide high-quality wireless audio streaming and data communication over Bluetooth in both Classic and LE Audio modes. This board is based on the IDC777-1, a fully integrated Bluetooth 5.4 module from IOT747 supporting LE Audio Unicast and Auracast, controlled via UART. It supports multiple Bluetooth...
Clicker 4 for STM32L4R9VG Code, Click, Create – All on One Board! Clicker 4 for STM32L4R9VG gives you the tools to create advanced embedded solutions, right out of the box – fast, flexible, and power-efficient.
ADAC 4 Click is a compact add-on board designed to provide configurable analog and digital I/O functionality through eight flexible channels, suitable for various control and monitoring tasks in embedded applications. It is based on the TPAFE0808, an 8-channel configurable ADC/DAC with I2C communication support from 3PEAK. Each channel can independently...
Power MUX 3 Click is a compact add-on board designed to manage multiple power sources in systems requiring high availability and power switching. It is based on the LTC4417, a prioritized PowerPath™ controller from Analog Devices that autonomously selects and connects one of up to three valid power supplies to a common output based on predefined priority...
LCD IPS 1.65” Display (ER-TFT1.65-2) is a 1.65-inch bar-type IPS TFT LCD from EastRising with a resolution of 142x428 pixels, designed for compact applications requiring high visual clarity. It features a 700:1 contrast ratio and a brightness of 350cd/m², ensuring vivid colors and sharp images even in well-lit environments. Thanks to IPS technology, it...
Temp&Hum 27 Click is a compact add-on board designed for measurement of temperature and relative humidity in both industrial and automotive environments. It is based on the HS4001 from Renesas, a high-performance MEMS sensor with fully calibrated and temperature-compensated digital output. This sensor features NIST-traceable calibration, ISO/IEC...
SolidSwitch 9 Click is a compact add-on board designed for high-side switching across four independent channels for controlling resistive and inductive loads directly connected to ground, ideal for use in automotive and industrial environments. It is based on the VN9D5D20FN, a 4-channel high-side driver from STMicroelectronics with 24-bit SPI control for...
3D Hall 13 Click is a compact add-on board designed for contactless 3D magnetic field sensing and precise angular position measurements. It is based on the TMAG3001, a low-power 3D linear Hall-effect and angle sensor from Texas Instruments with integrated CORDIC engine and 12-bit ADC. This Click board™ supports I2C communication up to 1MHz and features...
Smart Buck 7 Click is a compact add-on board designed to provide four precisely regulated power rails from a single external source, ideal for powering complex embedded systems with multiple voltage domains. It is based on the MYWGC3R53FF, a MonoBK™ multi-output DC-DC converter module from Murata. This highly integrated module delivers fixed output...
Clicker 4 for STM32L4A6VG Compact. Powerful. Ready to Click! Prototype smarter, faster – with Clicker 4 for STM32L4A6VG, the all-in-one board for feature-rich embedded solutions.
Button 4 Click is a compact add-on board designed to provide controlled and reliable manual system resets in embedded applications. It is based on the TPS3422 push-button reset controller from Texas Instruments, known for its ultra-low power consumption and precision timing features. The board features a programmable delay mechanism that differentiates...
Stepper 27 Click is a compact add-on board designed for control of 2-phase stepper motors, enabling smooth, quiet, and high-resolution motion in embedded applications. It is based on the MAX22210, a highly integrated stepper motor driver from Analog Devices featuring two low-impedance H-bridges and a 128-microstep indexer. It includes non-dissipative...
Proximity 22 Click is a compact add-on board designed for accurate proximity, ambient light, and color sensing in various low-light and display-adaptive applications. It is based on the TCS3720 sensor from ams OSRAM, which integrates proximity detection, RGB and clear light sensing, and ambient light compensation. The board also supports I2C communication...
Solenoid Driver Click is a compact add-on board designed to drive inductive loads such as solenoids and valves in automotive and industrial applications. It is based on the DRV81004-Q1, a four-channel low-side switch from Texas Instruments with integrated protection and diagnostic features. It features four N-channel MOSFETs with 700mΩ ON resistance,...
LCD IPS 0.87” White Display (ER-OLED0.87-1W) is a compact and high-contrast 0.87-inch white graphic OLED module developed by EastRising featuring a 128x32 resolution and driven by the SSD1316 controller. It supports I2C communication interface, and operates on a single 3.3V power supply. With its self-emissive OLED technology, it offers a free viewing...
Loading
Load more
Loading
