Filter Product By
Slide and select filter/s
Filtered by
for PIC32MZ CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for PIC32MZ CAPACITIVE FPI with bezel is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
Fusion for ARM v8 is a development board for ARM architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and other.
GNSS 13 Click is a compact add-on board that provides positioning, navigation, and timing services. This board features the LG77LICMD, a global-region standard-precision GNSS module from Quectel Wireless Solutions. This module utilizes concurrent reception of up to three GNSS systems - GPS, GLONASS (or BeiDou), and Galileo, maximizing position...
H Bridge 12 Click is a compact add-on board with an H-Bridge gate driver, also known as a full-bridge pre-driver. This board features the DRV8823, a 4-bridge serial interface motor driver from Texas Instruments. Each of the four H-Bridge driver blocks uses N-channel power MOSFETs configured as H-Bridge to drive the motor windings. All four blocks provide...
eFuse 7 Click is a compact add-on board with a power path protection solution that limits circuit currents and voltages to safe levels during fault conditions. This board features the LS12052BD33, an eFuse with over-voltage protection and blocking FET control from Littelfuse. This industrial eFuse has a wide input voltage from 2.7V up to 18V, external...
LIN Hall 2 Click is a compact add-on board representing a linear Hall-effect sensing solution. This board features the TMAG5253, a low-power linear Hall-effect sensor from Texas Instruments. The sensor responds proportionally to the magnetic flux density with a magnetic sensitivity range of ±80mT and outputs proportional analog voltage. The sensor comes...
Barcode 3 Click is a compact add-on board for efficient barcode scanning applications. This board features the LV30, an advanced area image engine from Rakinda. The LV30 features a laser aiming system and LED illumination, ensuring quick and accurate barcode decoding on various media, including paper and magnetic cards. This module also includes a red LED...
Solar Energy 3 Click - 1V8 is a compact add-on board for energy harvesting in low-power applications. This board features the NEH2000BY, an energy-harvesting PMIC from Nexperia. This board also features the AMG-1401C photovoltaic cell, known for its high efficiency of over 20%, even in low and artificial light environments. The NEH2000BY manages energy...
Smart DOF 5 Click is a compact add-on board designed for precise motion and orientation detection in automotive applications. This board features the ASM330LHHXG1, a high-accuracy 6-axis inertial measurement unit (IMU) from STMicroelectronics. It features a 3-axis accelerometer and a 3-axis gyroscope and supports dual operating modes (high-performance and...
SPI Isolator 9 Click is a compact add-on board designed for secure and reliable SPI communication across isolated domains. This board features the 4DIR1421H, a quad-channel digital isolator from Infineon, known for precise data communication and low power consumption. Featuring Infineon's ISOFACE™ Coreless Transformer (CT) technology, it provides...
EasyMx PRO v7 for Tiva C Series Empty MCU card for 64-pin TQFP TM4C123 series. Card is not populated with components. Pin distance 100mil.
Tilt 3 Click is a compact add-on board used for measuring the tilt in multiple axes in relation to an absolute level plane. This board features the DSBA1P, a tilt sensor switch that breaks the circuit when tilted to an angle from ±30° to ±60° from NKK Switches. The DSBA1P is a non-contact switch with an embedded photo-interrupter that ensures high...
for PIC CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for PIC CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more...
Magneto 11 Click is a compact add-on board that contains an accurate and reliable magnetic sensing device. This board features the AS5510, a linear hall sensor with 10-bit resolution, and an I2C interface from ams AG. It can measure the absolute position of lateral movement of a simple 2-pole magnet. A lateral stroke of 0.5mm ~ 2mm can be measured with...
USB Type A Socket Right Angle (205B-DAN0-R) is a universal 2.0 Type A USB connector from Attend, primarily used on host controllers in computers and hubs. Type A is the "original" most recognizable and commonly used USB connector featuring hot-swapping and Plug-n-Play, which changes the user behavior of all pluggable devices. Based on its compact design...
One of the most used high-level build systems in the world - CMake is implemented in our all-in-one IDE NECTO Studio. When you hear CMake, you might think, how will I know what to do. We have simplified it and added everything you will ever need when working on any project. Just like this T-shirt says "It's like a piece of cake, making a project in...
Timer Relay Click is a compact add-on board that allows you to control the load with a timer. This board features the NE555, a precision timer from Diodes Incorporated. It is a precision timing circuit capable of producing accurate time delays in a monostable mode of operation. The Timer Relay Click features the SRD-5VDC-SL-C, a relay from Ningbo, to...
Proximity 19 Click is a compact add-on board designed for precise proximity sensing in various applications. This board features the RPR-0720, a digital optical proximity sensor from ROHM Semiconductor. The RPR-0720 integrates an infrared VCSEL (IrVCSEL) and an IC with an I2C interface, featuring a detection range adjustable from 1 to 15mm and an ambient...
Current 10 Click is a compact add-on board designed for reliable current measurements. This board features the CT455, an XtremeSense™ TMR coreless current sensor from Allegro Microsystems, with a wide 1MHz bandwidth and a sensitivity of 333.3mV/mT, capable of detecting both positive and negative current flows (±6mT). It translates magnetic fields into a...
Nixie Power Click is a booster Click board™ designed to provide high voltage for powering Nixie Tube Shields. This board features the LM2577 step-up voltage regulator enabling a two-stage boost conversion from 5V to 150V. It also integrates a 16-bit I/O expander MCP23017 for precise Shields control via the I2C interface and ADDR SEL jumpers for easy I2C...
Buck 12 Click is a high-efficiency step-down converter which provides 3.3V on its output, derived from the connected power supply voltage, in the range from 4.2V to 18V. Buck 12 click is based on the MPQ8632, a highly efficient DC-DC step-down converter. In addition, Buck 12 click offers monitoring the stability of the input and output voltage by...
Loading
Load more
Loading
