Filter Product By
Slide and select filter/s
Filtered by
Temp&Hum 19 Click is a compact add-on board that represents temperature and humidity sensing solution. This board features the BPS240, a highly accurate relative humidity and temperature sensor from Bourns. This sensor, characterized by its high accuracy (±2% from 20% to 80%RH (±4% over entire humidity range)) and high resolution, provides 10-bit data...
Step Down 3 Click is a compact add-on board that steps down the voltage from its input to its output. This board features the ST1PS03, a nano-quiescent miniaturized synchronous step-down converter with a load switch from STMicroelectronics. The ST1PS03 can provide up to 400mA output current with an input voltage ranging from 1.8V to 5.5V, specifically...
Step Down 5 Click is a compact add-on board that converts a higher voltage into a lower voltage level. This board features the TPS628510, a high-efficiency, easy-to-use, synchronous step-down DC/DC converter from Texas Instruments. The TPS628510 can provide up to 500mA output current with an input voltage ranging from 2.7V to 6V, specifically designed for...
Internal Quad Band Active PWB Antenna (W3501) is a small but powerful flat patch multiband antenna designed for GSM 850/GSM 900/DCS 1800 /PCS 1900 frequency range for satellite tracking, ISM, and wireless applications. Measuring just 25x87mm with its flexible PCB thickness of 0.2mm, this antenna is incredibly efficient and has a nominal impedance of 50Ω....
Nano Power 3 Click is a compact add-on board that steps down voltages from its input (supply) to output (load). This board features the RPL-3.0-R, a buck converter with an integrated inductor from Recom Power. This thermally-enhanced converter uses, as input, voltage from 4 up to 18VDC, thus allowing 5V and 12V supply rails to be used. The output voltage...
Brushless 10 Click is a compact add-on board that provides precise control over brushless DC motors. This board features the TC78B016FTG, a 3-phase sine-wave PWM driver from Toshiba Semiconductor. The TC78B016FTG features Intelligent Phase Control for automatic motor phase adjustment, eliminating manual calibration, supporting an external power supply...
Click Shield for FRDM-MCXN947 Expand your horizons with the Click Shield for FRDM-MCXN947! Enhance the FRDM-MCXN947 board's capabilities using mikroBUS™ sockets to access a wide array of Click boards™ instantly. Unlock new possibilities and innovate without limits with just one host board.
RGB Ring Click is a compact add-on board designed for dynamic and colorful lighting applications. This board features eight RGB LEDs (WL-ICLED 1312020030000) from Würth Elektronik, incorporating integrated circuits to control color mixing precisely. This board supports individual control of each LED's red, green, and blue components with single-wire...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
Servo 2 Click is a compact add-on board designed for precise control of multiple standard servo motors. It is based on the TLC59401, a 16-channel constant-current sink LED driver from Texas Instruments with integrated PWM control. Each channel supports 12-bit resolution for fine-grained pulse width modulation, with up to 4096 steps of adjustment, and can...
BT-EZ 2 Click is a compact add-on board that provides Bluetooth Low Energy connectivity, enabling developers to quickly integrate wireless communication into embedded systems. It is based on the CYW20822-P4TAI040, a fully integrated Bluetooth Low Energy 5.0 module from Infineon that combines the CYW20822 silicon device with onboard crystal oscillator,...
80-pin MCU card with PIC24FJ96GA008
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
Buck 11 click is a high-efficiency step-down converter which provides 3.3V on its output, derived from the connected power supply voltage, in the range from 4.2V to 60V. Buck 11 click is based on the LMR36015, a highly efficient DC-DC step-down converter. In addition, Buck 11 click offers monitoring the stability of the output voltage by employing an...
BarGraph 10-Seg Red (JSB-R102510ZR) is a high-quality 10-segment red color bar graph LED display measuring 25.5x10.10x7.9mm. The segments of this bar graph LED display are bright and uniformly colored, providing a nice and clean visual feedback drawing about 20mA of current. It is suitable for displaying various properties, whether an audio level,...
AudioAMP 9 Click is a compact add-on board reproducing input audio signals with desired volume and power levels at sound-producing output elements. This board features the PAM8124, a 10W efficient, Class-D audio power amplifier from Diodes Incorporated for driving stereo speakers in a single-ended configuration. This GPIO configurable audio amplifier can...
IR Gesture 3 Click is a compact add-on board that provides contactless gesture recognition. This board features the ADPD1080, a photometric front-end from Analog Devices. The IR Gesture 3 Click allows gesture recognition in two dimensions, with a built-in optical filter and a sharp visible light cutoff. It eliminates the need for external lenses and...
UT-L 7-SEG B Click is a compact add-on board that presents an easy solution for adding a numeric or hexadecimal display to your application. This board features two blue JSS-5611BUB-21s, ultra-thin single-digit numeric displays from Ningbo Junsheng Electronics. The displays are medium (0.56 inches in height) and can display letters, numbers, and symbols...
LTE IoT 17 Click is a compact add-on board designed for low-power, long-range cellular communication in IoT applications. This board features the SIM7070E, a multi-band LTE module from SIMCom that supports the European/Australian region's Cat-M, Cat-NB, and GSM modes. Key features include a maximum 589kbps downlink and 1.1Mbps uplink rate, support of...
Piezo Accel 2 Click - 50g is a compact add-on board for precise vibration and motion monitoring in condition-based maintenance applications. This board features the 830M1-0050, a triaxial piezoelectric accelerometer from TE Connectivity, capable of detecting motion and acceleration along all three axes (X, Y, Z). The 830M1-0050 offers a ±50g range with a...
48-pin EasyPSoC MCU Cards with different microcontrollers soldered on them. These cards are compatible with our EasyPSoC development system.
EasyPIC v8 for PIC24/dsPIC33 EasyPIC v8 for PIC24/dsPIC33 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyPIC v8 for PIC24/dsPIC33 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP...
Ai-WB2-12F Click is a compact add-on board for easy integration into the Internet of Things (IoT) and smart home applications. This board features the Ai-WB2-12F, a WiFi and BLE module from Ai-Thinker Technology, powered by the BL602 chip supporting WiFi 802.11b/g/n and BLE 5.0 protocols. With a low-power 32-bit RISC CPU, 276KB of RAM, and various...
Power Monitor 2 Click is a compact add-on board for precise power monitoring of connected load devices. This board features two INA219 12-bit I2C-output digital power monitors from Texas Instruments. This Click board™ monitors current and voltage on two separate power rails - 3.3V and 5V - of an onboard mikroBUS™ socket, providing real-time digital...
Loading
Load more
Loading
