Filter Product By
Slide and select filter/s
Filtered by
If you need a battery power supply, we have a great and compact solution. This rechargeable 2000mAh 3.7V battery can deliver even more.
1x26 Female Header Socket
mikroProg for PIC, dsPIC and PIC32 is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports over 1000 microcontrollers from Microchip.
The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the MPU. The DR...
Analog resistive touch panel attached to the Graphic LCD 128x64 to form Graphic LCD Touch screen. Graphic LCD 128X64 (Blue) is a framed graphical LCD 128 x 64px liquid crystal display with backlight. This unit is a very clear STN type LCD with a simple command interface. This new v2.0 module includes the negative voltage circuitry on board. Features of...
Plastic Pen for TouchPanel
EasyPIC v7 is top selling PIC Development Board for 370+ Microchip PIC MCUs in DIP packaging. It features USB 2.0 programmer/debugger and over 17 essential modules necessary in development. Board comes with PIC18F45K22. Note: Displays and click boards are not included in the package. Buy now Note: Displays and click boards are not included in the...
RFiD tag 13.56MHz, ISO14443-A standard, Blue, Green, Red, Yellow, Black Color. Here at MikroE we use these exact same RFid tags to enter our building every day.
This right angle rubber antena is excelent fit for all GSM click boards that we have in our offer. It supports various range of freqeuncices and bands.
Wire Jumpers Female to Female (15 cm length, 10pcs - different color)
The TFT - PROTO Board contains TFT Color Display MI0283QT-9A with 320x240px resolution which is driven by ILI9341 display controller. It also features a Touch Screen and therefore can be used as input device.
The USB UART Board is a prototype board that features a USB support with an on-board USB to serial UART interface device FT232RL. There is also a jumper used for selecting VCC output level provided on the board.
1x26 Stacking Header
GSM Click is a compact add-on board that represents a compact GSM cellular network communication solution. This board features the GL865-QUAD, a GSM/GPRS embedded module from Telit Cinterion. This module features a full set of options for cellular networking and communication, such as the network status indication, jamming detection, embedded TCP/IP...
Wire Jumpers Male to Female (15 cm length, 10pcs)
1x26 Male Pin Header
The TH Black mikroBUS™ socket has a stronger design for easier interfacing with Click boards™. It features horizontal supports between 8-pin connectors and a 45° chamfered lower edge, ensuring a perfect fit and alignment. All pins are clearly labeled for secure placement. These sockets are packaged in plastic anti-static shipping tubes for safe...
microSD Click is a compact add-on board that lets you interface a microSD card with your application. This board features a microSD card slot for microSD cards used as a mass storage medium for portable devices. It is intended for use with standard microSD, removable miniaturized Secure Digital flash memory cards. The other term for those cards is...
Ready for PIC Ready for PIC Board is the best solution for fast and simple development of microcontroller applications using 28- and 40-pin PIC MCUs. It comes with PIC18F45K22 connected to 8MHz crystal oscillator. It contains four IDC10 headers for all available microcontroller ports, USB-UART module, prototyping area and a power supply circuit. Board is...
PIC18F45K22-I/P (DIP40/64MHz) Microcontroller
Arduino Uno click shield is an extension for Arduino Uno and any other Arduino-compatible board. It's a simple shield with two mikroBUS™ host sockets that allow you to connect more than 1250 different types of Click boards™ to the Arduino.
MINI-M4 for STM32 MINI-M4 for STM32 is a small ARM® Cortex™-M4 development board containing STM32F415RG microcontroller. It is pin compatible with PIC16F887 and PIC18(L)F45K20 microcontrontrollers and it perfectly fits into standard DIP40 socket. Board is equipped with 16MHz SMD crystal oscillator, and 32.768KHz crystal which can be used for internal...
Smart programmable touch 2.8'' display, packed with features. Mikromedia can be used for controlling a wide range of applications: from simple hobby projects, up to entire machine installations. It is powered by PIC32MX460F512L microcontroller unit, it gives you true power to build GUI-centric embedded applications.
Wire Jumpers Male to Male (15 cm length, 10pcs - different color)
Loading
Load more
Loading
