![cercle_rouge.png](http://cdn.mikroe.com/product/for_many/on_board/cercle_rouge.png)
![tft_pic32.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/tft_pic32.png)
TFT with Touch Panel
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
![reset_pic32.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/reset_pic32.png)
Frontal Reset Button
If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.
![mikroprog_conn.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/mikroprog_conn.png)
mikroProg connector
Pads for connecting and programming the board with mikroProg for PIC, dsPIC and PIC32 external programmer
![icd_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/icd_connector.png)
ICD2/3 connector
Pads for connecting ICD2/3 connector board and programimg the MCU with external programmer.
![audio_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/audio_connector.png)
Audio Connector
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
![battery_charger.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/battery_charger.png)
Battery Charger
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
![battery_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/battery_connector.png)
Battery Connector
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
![usb_connector.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/usb_connector.png)
miniUSB connector
PIC32MX460F512L with USB OTG support, allows you to communicate with a PC or other USB devices using USB connection.
![power_reg.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/power_reg.png)
Power Regulator
On-Board power regulator ensures that each part of the board get the right voltages.
![serial_flash.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/serial_flash.png)
Serial Flash
Store up to 8 Mbit of data in EN25F80 Serial Flash Memory with 25 MHz SPI Bus Interface.
![pads.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/pads.png)
Connection pads
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
![reset_btn.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/reset_btn.png)
Reset Button
High quality reset button with surrounding reset circuitry ensures stable reset operation.
![mcu.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/mcu.png)
Microcontroller
PIC32MX460F512L is an exceptional 32-bit MCU. 80MIPS power, hardware multiplier and divider, DMA controller and stunning set of integrated modules make this chip a great choice.
![crystal_oscillator.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/crystal_oscillator.png)
Crystal Oscillator
8Mhz crystal oscillator circuit that provides external clock is connected to microcontroller osc pins.
![power_led.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/power_led.png)
Power LED
We have added power indicator LED, so you can be sure whether your board has stable power supply.
![microsd_slot.png](http://cdn.mikroe.com/product/mikromedia/mikromedia_2.8/for_PIC32/on_board/microsd_slot.png)
microSD card slot
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.