Filter Product By
Slide and select filter/s
Filtered by
SpeakUp Click is a compact add-on board providing an offline speech recognition solution. This board features the VS1053, an Ogg Vorbis/MP3/AAC/WMA/FLAC/MIDI audio codec from VLSI Solution. It provides an audio encoder and decoder for those formats on a single chip alongside a low-power DSP processor, data memory, 16KB instruction RAM, and 0.5KB RAM for...
tRF Click is a compact add-on board with a complete short-range RF communication solution operating in the 868MHz ISM license-free frequency band. This board features the LE70-868, a short-range wireless module from Telit Cinterion. It features the complete RF, software stack, and packet handling onboard, exposing just a simple UART interface and offering...
CC3000 Click is a compact add-on board that sends and receives data over Wi-Fi. This board features the CC3000MOD, a Wi-Fi 802.11b/g SimpleLink™ series network processor from Texas Instruments. The TI’s SimpleLink™ is a platform with industry-leading features, including low power and robustness, and integrates security support with more than ten...
Stepper click is a complete solution for driving bipolar stepper motors with full/half and micro-steps. It features the A3967 IC from Allegro Microsystems with proprietary Satlington™ sink drivers on its outputs, which ensure high efficiency and reliable operation of the internal H-Bridges. This IC has the integrated translation section, used to simplify...
DC Motor Click is a compact add-on board with a brushed DC motor driver. This board features the DRV8833, an H-bridge motor driver with current-control PWM circuitry from Texas Instruments. The DRV8833 has two integrated H-bridges connected in parallel for double the current of a single H-bridge rated for an operating voltage range from 3V to 10V with...
PROTO Click is an accessory Click board™ used as a construction base for prototyping electronics in mikroBUS™ form factor. It features a 10x11 prototyping area and additional power pads providing an easy and elegant solution for adding the external connection capability to the Click board™, plugged on a mikroBUS™ socket. This Click board™ represents a...
CapSense Click is a compact add-on board that easily integrates projected capacitive touch into users' applications. This board features the CY8C201A0, a multi-channel capacitive touch sensor that takes human body capacitance as an input and directly provides real-time sensor information via the I2C serial interface from Infineon Technologies. This board...
Joystick Click is a compact add-on board representing a smart navigation key concept based on contactless magnetic movement detection. This board features AS5013 and N50P105, a miniature magnetic joystick module, and a complete hall sensor IC both from ams AG. The two-dimensional linear encoder AS5013, mounted on the bottom side of this Click board™,...
Altitude Click is a compact add-on board that allows height measurement of an object or point related to sea level or ground level. This board features the MPL3115A2, a MEMS pressure sensor providing accurate pressure/altitude and temperature data measurements from NXP Semiconductors. The MPL3115A2 provides 20-bit pressure/altitude and 12-bit temperature...
Color Click is a compact add-on board representing an accurate color-sensing solution. This board features the TCS3471, a color light-to-digital converter from ams AG. It can sense red, green, and blue light components and clear light. It has a very high dynamic range of 1,000,000:1, which allows it to be used in various light conditions. It is equipped...
FRAM Click is a compact add-on board representing a highly reliable ferroelectric random access memory solution. This board features the MB85RS256A, a memory FRAM from Fujitsu. The MB85RS256A is a 256 Kbit serial FRAM module and comes in a configuration of 32,768 words x 8 bits, using the ferroelectric process and silicon gate CMOS process technologies...
Proximity Click is a compact add-on board that contains a close-range proximity sensing solution. This board features the VCNL4010, a fully integrated proximity and ambient light sensor from Vishay Semiconductors. The VCNL4010 has a built-in infrared emitter and photo-pin-diode for proximity function alongside a 16-bit effective resolution for proximity...
Thunder Click is a compact add-on board that detects the presence and proximity of potentially hazardous lightning activity in the vicinity. This board features the AS3935, a programmable fully integrated lightning sensor from ScioSense with a sensitive coil antenna, and the MA5532 from Coilcraft. Besides detecting potentially hazardous lightning...
RFid Click is a compact add-on board that equips any embedded application with an RFID reader/writer. This board features the CR95HF, a multi-protocol contactless transceiver from STMicroelectronics. It provides RF communication on 13.56MHz and works with NFC/RFID tags and other ST reader products. Besides a selectable interface, it has up to a 528-byte...
Fiber Opt Click 5V is a compact add-on board that adds fiber-optic communication to your design. This board features one IF-D91, a fiber-optic photodiode, and one IF-E97, a fiber-optic LED, both from Industrial Fiber Optics. It provides a plastic optic connection feature over a plastic fiber cable with typical data rates of up to 512Kbps, and a maximum of...
ccRF Click is a compact add-on board that contains a complete RF digital data transceiver. This board features the CC2500, a low-power, high-performance 2.4GHz OOK, 2-FSK, GFSK, and MSK transceiver from Texas Instruments. The CC2500 is configurable through SPI serial interface and operates with only 3.3V in the worldwide ISM/SRD frequency from 2400MHz up...
Adapter Click is an adapter board that simplifies the connection of add-ons with IDC10 headers to the mikroBUS™ socket. One 2x5-position 2.54mm pitch header makes an easy and elegant way to add the external connections to your development system, thorugh a mikroBUS™ socket. Each mikroBUS™ line is covered, except AN and RST, with two jumpers for...
FM Click is a compact add-on board that provides an FM radio tuner with any MCU. This board features the Si4703, a broadcast FM radio tuner for portable applications from Silicon Labs. The Si4703 supports a worldwide FM band of 76-108MHz, with an integrated digital low-IF receiver, frequency synthesizer with VCO, seek tunning, automatic frequency control...
EVE Click is an adapter add-on board that provides display, audio, and touch control from a single solution. This board features the FT800, an easy-to-use graphic controller from FTDI. It provides an embedded video engine (EVE) with widget support, built-in graphics operations, a graphic controller, audio processing, and a resistive touch controller with...
BarGraph Click is a compact add-on board with an LED bar graph display. This board features two SN74HC595Ds, 8-bit shift registers with 3-state output registers from Texas Instruments. The LED bar graph display consists of 10 red LEDs, and you can control each LED separately, including the light intensity. The segments of the onboard bar graph LED display...
Light Click is a compact add-on board that effectively measures ambient light intensity. This board features the PD15-22C/TR8, a high-speed, high-sensitive PIN photodiode from Everlight Electronics. The PD15-22C/TR8 is spectrally matched to a visible and infrared emitting diode with a spectral range from 400 to 1100nm. Besides, it is characterized by a...
FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications....
Loading
Load more
Loading
