Filter Product By
Slide and select filter/s
Filtered by
Categories
Mikroe has collaborated closely with Texas Instruments to offer you a broad portfolio of products from this vendor, which will help you reducing development effort and accelerate time to market. As a 3rd party tool provider we strive to promote partners newest theologies and products, by offering them to the broad market.
1x4 RGB Click is a compact add-on board that creates vivid and dynamic lighting effects. This board features the LP5812, an advanced RGB LED driver from Texas Instruments. It features ultra-low operation current, an autonomous animation engine, and support for both analog and PWM dimming. The board operates with 3.3V or 5V logic voltage levels and...
2X2 Key Click is a compact add-on board that integrates four buttons into one design. This board features a 2x2 button keyboard with debounce circuit. The debounce circuit is composed of the 74HC32, a quad 2-input OR gate from Nexperia, and the SN74HC14, a Hex Schmitt-Trigger inverter from Texas Instruments. This 2x2 matrix keyboard allows multiple key...
2x30W Amp click is a class-D audio amplifier with a tremendous output power, considering its size and lack of huge heatsinks, usually associated with the audio amplifiers. This is due to the fact that the efficiency of the amplifier IC is quite high (greater than 90%), featuring the efficiency boost mode, which dynamically reduces the current ripple of...
3D Hall 10 Click is a compact add-on board used to detect the strength of a magnetic field in all three dimensions. This board features the TMAG5170, a high-precision linear 3D Hall effect sensor from Texas Instruments. The TMAG5170 features an SPI interface for configuration by MCU. The measurement data is provided in digital format of 12-bits...
3D Hall 11 Click is a compact add-on board used to detect the strength of a magnetic field in all three dimensions. This board features the TMAG5273, a low-power linear 3D Hall-effect sensor from Texas Instruments. A precision analog signal chain alongside an integrated 12-bit ADC digitizes the measured analog magnetic field values and passes them via the...
3xBuck click is a triple step-down (buck) converter Click board™. It features three independent output terminals that can provide 1.8V, 3.3V, and 5V with the combined current output up to 3A. This specific selection of output voltages makes this Click board™ a perfect choice for an embedded application power supply, as these voltages are the most commonly...
4-20mA R Click is a compact add-on board that serves as a receiver in a 4-20mA current loop standard. This board features INA196, a current shunt monitor from Texas Instruments. The INA196 can sense drops across the shunt at common-mode voltages from -16V up to +80V, independent of its supply voltage. Thanks to the boost converter, high input voltages...
4-20mA T 2 Click is a compact add-on board for transmitting an analog output current over an industry-standard 4-20mA current loop. This board features DAC161S997, a low-power 16-bit ΣΔ digital-to-analog converter (DAC) from Texas Instruments. It has a programmable Power-Up condition and loop-error detection/reporting accessible via simple 4-wire SPI for...
4-20mA T Click is a compact add-on board that serves as a transmitter in a 4-20mA current loop standard. This board features XTR116, a current loop transmitter from Texas Instruments. The XTR116 provides accurate, current scaling and output limit functions. To communicate with the target MCU over an SPI interface, this board use MCP4921, a DAC from...
6LoWPAN C click is a compact add-on board that adds an IPv6 over low-power wireless personal area networks to your application. This board features the CC2520, a 2.4GHz IEEE802.15.4/Zigbee RF transceiver from Texas Instruments. Over a chip antenna, with 2394 up to 2507MHz frequency range and appropriate balun, this transceiver can achieve a data rate of...
6LoPWAN T Click is a compact add-on board that adds an IPv6 over low-power wireless personal area networks to your application. This board features the CC2520, a 2.4GHz IEEE802.15.4/Zigbee RF transceiver from Texas Instruments. Over a PCB printed trace antenna, with 2394 up to 2507MHz frequency range and appropriate balun, this transceiver can achieve a...
7seg Click is a compact add-on board representing an easy solution for adding numeric or hexadecimal displays to your application. This board features a double pack of the SN74HC595D, an 8-bit serial-in, parallel-out shift register modules from Texas Instruments, as well as two seven-segment red displays, the JS1-5213AE from Ningbo Junsheng Electronics....
Loading
Load more
Loading
