Filter Product By
Slide and select filter/s
Filtered by
Diff Press 2 Click is a compact add-on board that contains Sensirion’s differential pressure sensor. This board features the SDP31-500PA, a small differential pressure sensor designed for high-volume applications. The SDP31-500PA comes with a configurable host interface that supports I2C serial communication and measures pressure in a range from -500Pa up...
Proximity 16 Click is a compact add-on board that contains a close-range proximity sensing solution. This board features the VL53L5CX, a Time-of-Flight (ToF) multizone ranging sensor from STMicroelectronics. The VL53L5CX integrates a SPAD array, physical infrared filters, and diffractive optical elements (DOE) to achieve the best-ranging performance in...
Dot matrix 0.7in 5x7 Red (SZ420757N) represents a dot matrix display suitable to generate alpha, numeric, or custom character output specially designed by Wuxi Ark Technology Electronic. The SZ420757N LED dot matrix module comes in a 7x5 stylish configuration with round, and dot-like (1.9mm) LED elements producing clean and uniform patterns. These parts...
Microwave 5 Click is a compact add-on board that utilizes the Doppler Shift Phenomenon to sense motion. This board features the PD-V10-502, a miniature X-band microwave transceiver from Ningbo Pdlux Electronic Technology. The transmitter on this transceiver works on a 10.525GHz frequency over the patch antenna, with a 2-4kHz pulse repetition frequency....
IoT ExpressLink 3 Click is a compact add-on board that allows users to connect easily to IoT ExpressLink services and securely interact with cloud applications and other devices. This board features the NORA-W256WS, a standalone multi-radio module from u-blox. The module supports Wi-Fi radio at 802.11b/g/n standard and 2.4GHz of ISM band. It also supports...
70 green LEDs for displaying symbols and characters 7x10 G click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are...
Driver Click features an IC with seven integrated high-current sink drivers, which can be used to drive a wide range of loads via simple parallel interface. These integrated drivers use high-efficiency MOSFETs for improved thermal performance. The DRV777 integrated motor and relay driver IC from Texas Instruments is the main active element of this Click...
DigiVref click is a very precise voltage reference Click board™, which allows one of four different voltage values to be selected over the SPI interface. Once the selection is done, the voltage reference stays fixed, even when the SPI interface is completely disconnected. The voltage reference is buffered by an operational amplifier, and thus it is very...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
RMS to DC 2 Click is a compact add-on board that converts the RMS of the input signal into a DC voltage. This board features the AD8436, a low-cost, low-power, true RMS-to-DC converter from Analog Devices. The AD8436 is a translinear precision, low-power, true RMS-to-DC converter that delivers true RMS or average rectified value of AC waveform. It...
ADC 23 Click is a compact add-on board that converts an analog voltage into a digital representation. This board features the ADS127L11, a wide-bandwidth 24-bit delta-sigma analog-to-digital converter from Texas Instruments. It is capable of data rates up to 400ksps using a wideband filter and up to 1067ksps using a low-latency filter. It also offers an...
Audio Amp 2 Click is a highly efficient class D audio amplifier, using the TDA7491, a dual BTL class-D audio amplifier IC, capable of delivering up to 20W to 8Ω load. This amplifier IC features high-efficiency output stage drivers and clever design, allowing it to deliver a reasonably high power to the connected speakers, using only GND polygon on the PCB...
Standard empty MCU card for 100-pin TQFP Stellaris® 3000 series. Card is not populated with components. Pin distance 100mil.
Expand 15 Click is a compact add-on board that contains a multi-channel I/O expander. This board features the TCAL6416, a general-purpose I/O expansion for most microcontroller families from Texas Instruments. The TCAL6416 comes in one P-port configuration and allows easy addition of I/O through a standard I2C serial interface. P port is user-configurable...
The LV18F v6 development system supports 44-, 64-, 80- and 100-pin PIC18FxxJxx microcontrollers. It comes with a PIC18F87J60. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as MENU keypad, serial RAM, serial EEPROM etc.
Fingerprint 3 Click is an adapter Click board™, used to interface a compatible Fingerprint Sensor with Two-Color LED Ring with the host MCU. This Click board™ allows users to secure their projects with a biometric all-in-one fingerprint sensor that will make fingerprint detection and verification super simple. There is a wide range of applications, where...
USB-C Power Click is a compact add-on board that provides a quick and easy way to supply power without carrying multiple adapters or cables. This board features the TPS25750S, a highly integrated USB Type-C and Power Delivery (PD) controller with integrated power switches optimized for power applications from Texas Instruments. The TPS25750S integrates...
The Easy 8051 v6 PROTO Board is a high quality PCB prototype board. Connect your Easy8051 v6 development board to this board via an IDC10 connector. The board solves your prototype problems by offering a complete and cost-effective solution.
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
This is the default MCU card that comes with EasyFT90x v7. It contains the FT900 microcontroller with on-chip peripherals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
VCP Monitor 2 Click is a three-channel, high-side current and bus voltage monitor with alert indication function ensuring the intended application works within desired operating conditions. Featured chip INA3221-Q1, by Texas Instruments, monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and...
Force 3 Click is a compact add-on board with circuitry for implementing Force Sensing Resistor into your projects whose resistance changes when a force, pressure, or mechanical stress is applied. This board features FSR 400 series 34-00004 single zone Force Sensing Resistor from Interlink Electronics, a robust polymer thick film (PTF) device that exhibits...
DSP Click is a compact add-on board that contains a multi-effects digital signal processor. This board features the V1000, a complete multi-effects audio DSP with ultra-high quality audio performance in a rapid ‘time-to-market’ solution from Coolaudio. The V1000 includes its integrated RAM with 16 built-in multi-effects and reverb controlled via I/O pins...
Loading
Load more
Loading
