Filter Product By
Slide and select filter/s
Filtered by
IPS Display 2 Click is a compact add-on board that displays high-resolution graphics in embedded applications. This board features the ER-TFT1.54-2, a 1.54" TFT LCD display from EastRising Technology, and uses the ST7789V2 controller for 262K color output. The display offers a 240x240 pixel resolution, operates through a 3-wire SPI interface, and includes...
Piezo Driver Click is a compact add-on board that allows you easy system configuration for driving a two-terminal or three-terminal piezo sounder with few external components. This board features the PAM8906, a piezo sounder driver with self-excitation mode from Diodes Incorporated. It has a built-in boost converter capable of driving a piezo sounder with...
UV 2 Click is a compact add-on board that measures ultraviolet light. This board features the VEML6075, a UVA and UVB light sensor with an I2C interface from Vishay. It incorporates a photodiode, amplifiers, and analog/digital circuits into a single device using CMOS technology and converts solar UV light intensity to digital data in 16-bit resolution....
The AVRPLC16 v6 is an AVR-based PLC system used to develop industrial, home or office control devices. The system features GSM(GPRS), GPS communication, 16 relays, 8 optocoupled inputs, RS485, RS232, Ethernet, MMC/SD and many more.
Tilt-n-Shake Click is a compact add-on board suitable for acceleration and inclination measurements. This board features the MMA8491Q, a multifunctional 3-axis digital accelerometer from NXP Semiconductors. The MMA8491Q can accommodate two accelerometer configurations, acting as either a 45° tilt sensor or a digital output accelerometer with a compatible...
ECG 5 click can be used for the development of ECG and Heart-Rate (HR) applications. The Click board™ features the AD8232, an integrated bio-signal front end. This IC has many features necessary for providing accurate ECG measurements, including very high common-mode rejection ratio, high gain with DC blocking capability, adjustable high-pass and low-pass...
Silent Step 3 Click is the complete integrated bipolar step motor driver solution, rich with many features that allow extremely smooth and silent operation of the connected motor while being able to provide up to 4A peak motor current and withstand up to 30V supply voltage. The specialized TMC2660 IC driver from Analog Devices far exceeds the capabilities...
Timer Click is a compact add-on board with timer functionalities that can easily be added to your application. This board features the DS1682, a total-elapsed-time recorder with an alarm from Analog Devices. The DS1682 has remarkable features such as a 32-bit nonvolatile elapsed time counter (ETC) that monitors event duration with a quarter of the second...
VAV Press Click is a compact add-on board that contains a board-mount pressure sensor. This board features the LMIS025B, a low differential pressure sensor from First Sensor (part of TE Connectivity). It is based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LMI technology features...
Relay 4 Click is a compact add-on board with a general-purpose relay that any host MCU can control. This board features the J1031C3VDC, high-current single-pole double-throw (SPDT) signal relay from CIT Relay and Switch. Highly sensitive, the J1031C3VDC offers a low coil power consumption in a small, lightweight package with PC pin mounting. It comes with...
Clicker 4 for PIC18F97J94 All the inventions waiting to happen... Clicker 4 for PIC18F97J94 is a compact development board designed as a complete solution, you can use it to quickly build your own gadgets with unique functionalities.
13DOF Click is an advanced 13-axis motion tracking Click board™, which utilizes three different sensor ICs onboard: BME680, a digital gas, humidity, pressure and temperature sensor and BMM150, a geomagnetic sensor and a BMI088, small, versatile 6DoF sensor module. All integrated sensors ICs are made by Bosch Sensortec, featuring the state-of-the-art...
RF Switch Click is a Click board™ equipped with the MASWSS0115, a GaAs PHEMT MMIC single-pole, double-throw (SPDT) switch developed by Macom for switching between small signal components such as filter banks, single-band LNAs, converters, etc. The MASWSS0115 is ideally suited for applications where a very small size and low cost are required. RF Switch...
RS232 Isolator 2 Click is a compact add-on board that contains a fully isolated transceiver used to provide secure and easy UART to RS232 conversion. This board features the ICL3221, a 3.3V powered RS232 transmitter/receiver that provides ±15kV ESD protection on its RS232 pins from Renesas. This Click board™ is characterized by an assured minimum data...
DC Motor 4 Click is a compact add-on board with a brushed DC motor driver. This board features the MAX14870, a compact full-bridge DC motor driver from Analog Devices. It can be used for driving and controlling brushed DC motors and relays with voltages between 4.5 and 36V. The driver can supply up to 2.5A of current as a motor peak and ensures a large...
I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply. The click communicates with the target microcontroller over an I2C interface with additional functionality provided by the...
A5000 Plug&Trust Click is a compact add-on board representing a ready-to-use secure IoT authenticator. This board features the EdgeLock® A5000, a Secure Authenticator from NXP Semiconductors. The A5000 provides a root of trust at the IC level, giving an IoT authentication system state-of-the-art security capability. It allows for securely storing and...
Tact Switch 4.5x4.5mm SMD (10pcs)
Buzz 3 Click is a compact add-on board that contains a sounder driver that produces higher volume with a lower current. This board features the PAM8904, a piezo-sounder driver with an integrated Multi-Mode charge pump boost converter from Diodes Incorporated. With its wide input signal range of 20Hz to 300kHz, the PAM8904 can drive a sounder load of up to...
DIGI POT 7 Click is a compact add-on board used as a digitally controlled potentiometer. This board features the AD5175, a single-channel 1024-position digital rheostat with less than ±1% end-to-end resistor tolerance error and 50-time programmable wiper memory from Analog Devices. This I2C configurable IC is designed to operate as a variable resistor for...
NECTO Studio Monthly subscription is the quickest and easiest way to unlock your NECTO Studio for ALL supported compilers (mikroC AI for ARM, mikroC AI for PIC, mikroC AI for PIC32, mikroC AI for dsPIC, mikroC AI for AVR and GCC toolchain for RISC-V). MIKROE-5228
Mosaic Click is a compact add-on board for precision navigation and location-based applications. This board features the Mosaic-X5, a compact global navigation satellite system (GNSS) receiver from Septentrio. The Mosaic-X5 stands out for its multi-band and multi-constellation tracking ability, ensuring robust and comprehensive global coverage. It...
MIC24045 click carries MIC24045 I2C-programmable, high-efficiency, wide input range, 2A synchronous step-down regulator from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface with additional functionality provided by the following pins on the mikroBUS™ line: RST,...
Loading
Load more
Loading
