STM32® ARM® toolchain released!
We have our way of doing things. Introducing a new vendor doesn't mean just building a development board.
It means having the entire development circle covered. Compiler support, libraries, examples, help files,
additional software, debuggers and accessory boards. And this is exactly how we did it.
New version of mikroC, mikroBasic and mikroPascal compilers for ARM® now include 186 new microcontrollers
from STM32, including Cortex™-M3 and Cortex™-M4. We introduced over 50 libraries and dozens of examples
that will get you started in no time. All of you who already own compiler licenses can get double the
functionality by just downloading the new compiler version. Others who don't can evaluate the compilers
under Demo limit and explore the look and feel before deciding to join the rest of us.
EasyMx PRO v7 for STM32® is amazing. It supports the entire family range of 186 STM32 microcontrollers
and it's rich with modules. On-board mikroProg™ debugger based on ST-LINK v2 will make sure to provide
you fast debugging and programming interface. Board is delivered with EasyTFT board which carries
320x240px TFT touchscreen, but the same connector can be used to place standard GLCD 128x64px.
Two mikroBUS sockets enable you to use fast growing number of popular Click Boards.
Board is delivered with MCU card containing STM32F107VCT6.
Of course, mikromedia for STM32® boards are here too. This time we have introduced two versions -
one we call the mikromedia for STM32® M3 carrying STM32F207VGT6 and the other, mikromedia for STM32® M4
carrying STM32F407VGT6 device. Both are equipped with rich multimedia modules, and provided
with full set of examples and documentation.
mikroProg for STM32® brings elegance and ease of use that you are used to with other
mikroElektronika debuggers. It's based on ST-LINK v2 debugger and will work with
mikroElektronika compilers, as well as others. It supports 186 STM32 microcontrollers,
as it's on-board version in EasyMx PRO v7 for STM32 board. Price is only $49.
We invite you to visit the STM32® solution page and browse through the list of
newly introduced products.
Yours sincerely,
mikroElektronika
STM32® ARM® toolchain released!
STM32® ARM® toolchain released!
Web Department Manager
Re: STM32® ARM® toolchain released!
Sir,
Can we use EasyMx PRO v7 for STM32 and mikroProg™ for STM32 with other complier(keil)?
Please let us know.
Regards
DQS
Can we use EasyMx PRO v7 for STM32 and mikroProg™ for STM32 with other complier(keil)?
Please let us know.
Regards
DQS
Re: STM32® ARM® toolchain released!
Yes, of course. On-board and standalone debuggers are derived from ST-LINK v2, so you'll be able to use them with other compilers that support this programmer/debugger.DQS wrote:Can we use EasyMx PRO v7 for STM32 and mikroProg™ for STM32 with other complier(keil)?
And our STM32 tools are amazing, you'll see for yourself. I highly recommend them.
Best regards,
Aleksandar
Web Department Manager
Re: STM32® ARM® toolchain released!
How about the other way around? Can we use your MikroC with other ST-LINK/V2 programmer/debuggers? For example, the one embedded on the STM32 Discovery boards?DQS wrote:Sir,
Can we use EasyMx PRO v7 for STM32 and mikroProg™ for STM32 with other complier(keil)?
DQS
- dejan.odabasic
- mikroElektronika team
- Posts: 2649
- Joined: 30 Apr 2012 14:20
Re: STM32® ARM® toolchain released!
Hello,
yes, you can use ST-LINK V2, but be careful you'll have to update your hardware to latest firmware.
Please take a look this post: http://www.mikroe.com/forum/viewtopic.php?f=178&t=48655
I think it might help you with firmware update.
Best regards.
yes, you can use ST-LINK V2, but be careful you'll have to update your hardware to latest firmware.
Please take a look this post: http://www.mikroe.com/forum/viewtopic.php?f=178&t=48655
I think it might help you with firmware update.
Best regards.