EasyWiFi Board is a all-in-one wireless 2.4GHz 802.11b solution with high-speed voltage translators, making it suitable for most microcontroller architectures. It carries MRF24WB0MA Wi-Fi radio transceiver module with integrated PCB antenna, matching circuitry.
The SHT1X PROTO Board is used to connect your prototype device with a temperature/humidity sensor. It features the SHT11 sensor that uses a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
The Accel SPI Board enables you to measure acceleration with a complete 3-axis acceleration tool ADXL345 provided on-board. This tool measures static, as well as dynamic acceleration resulting from motion or shock.
WiFi PROTO Board is a miniature, inexpensive wireless 2.4GHz 802.11b solution for your prototype. It carries MRF24WB0MA Wi-Fi radio transceiver module with integrated PCB antenna, matching circuitry, and supports Wi-Fi with the free TCP/IP protocol stack.
The microSD Card Board enables you to solve your prototype device memory storage problems with microSD memory cards. Add data acquisition with microSD card to your prototype device easily.
The ADC PROTO Board allows you to add A/D conversion feature to your prototype device. It includes a 12-bit ADC MCP3204 with 4 inputs and 4.096 Voltage Reference. The board can be used with all MCUs with SPI communication support.
The RTC2 PROTO Board allows you to connect a prototype device to a Real-Time Clock (RTC) using DS1307. As soon as you establish connection you are ready to keep track of real time. There is also an on-board battery for power supply backup.
The SHT1X Board features the SHT11 sensor. It is connected to a development board through a 2-wire serial interface, thus enabling you to measure temperature and humidity. Note: not recommended for new design.
100-pin LV24-33 MCU Cards provide easy connection to the development system through four 2x10 male connectors. The bottom layer of these cards is provided with a ground plane for noise prevention.
The SerialRAM PROTO Board enables you to add a Serial RAM device to your prototype device. A 23K640 Serial RAM device is available on-board and communicates with microcontrollers via a Serial Peripheral Interface (SPI).
If your prototype device needs more memory space then the SerialFlash PROTO Board is an excellent choice. The on-board EN25F80 circuit provides additional 8Mbit flash memory via a Serial Peripheral Interface (SPI). Ready-to-use examples comes with board.
The EasyPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your EasyPIC6 development board to this board via an IDC10 connector.
The BIGPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your BIGPIC6 development board to this board via an IDC10 connector.