LCD IPS 1.65” Display (ER-TFT1.65-2) is a 1.65-inch bar-type IPS TFT LCD from EastRising with a resolution of 142x428 pixels, designed for compact applications requiring high visual clarity. It features a 700:1 contrast ratio and a brightness of 350cd/m², ensuring vivid colors and sharp images even in well-lit environments. Thanks to IPS technology, it...
Temp&Hum 27 Click is a compact add-on board designed for measurement of temperature and relative humidity in both industrial and automotive environments. It is based on the HS4001 from Renesas, a high-performance MEMS sensor with fully calibrated and temperature-compensated digital output. This sensor features NIST-traceable calibration, ISO/IEC...
SolidSwitch 9 Click is a compact add-on board designed for high-side switching across four independent channels for controlling resistive and inductive loads directly connected to ground, ideal for use in automotive and industrial environments. It is based on the VN9D5D20FN, a 4-channel high-side driver from STMicroelectronics with 24-bit SPI control for...
3D Hall 13 Click is a compact add-on board designed for contactless 3D magnetic field sensing and precise angular position measurements. It is based on the TMAG3001, a low-power 3D linear Hall-effect and angle sensor from Texas Instruments with integrated CORDIC engine and 12-bit ADC. This Click board™ supports I2C communication up to 1MHz and features...
Smart Buck 7 Click is a compact add-on board designed to provide four precisely regulated power rails from a single external source, ideal for powering complex embedded systems with multiple voltage domains. It is based on the MYWGC3R53FF, a MonoBK™ multi-output DC-DC converter module from Murata. This highly integrated module delivers fixed output...
Clicker 4 for STM32L4A6VG Compact. Powerful. Ready to Click! Prototype smarter, faster – with Clicker 4 for STM32L4A6VG, the all-in-one board for feature-rich embedded solutions.
Button 4 Click is a compact add-on board designed to provide controlled and reliable manual system resets in embedded applications. It is based on the TPS3422 push-button reset controller from Texas Instruments, known for its ultra-low power consumption and precision timing features. The board features a programmable delay mechanism that differentiates...
Stepper 27 Click is a compact add-on board designed for control of 2-phase stepper motors, enabling smooth, quiet, and high-resolution motion in embedded applications. It is based on the MAX22210, a highly integrated stepper motor driver from Analog Devices featuring two low-impedance H-bridges and a 128-microstep indexer. It includes non-dissipative...
Proximity 22 Click is a compact add-on board designed for accurate proximity, ambient light, and color sensing in various low-light and display-adaptive applications. It is based on the TCS3720 sensor from ams OSRAM, which integrates proximity detection, RGB and clear light sensing, and ambient light compensation. The board also supports I2C communication...
Solenoid Driver Click is a compact add-on board designed to drive inductive loads such as solenoids and valves in automotive and industrial applications. It is based on the DRV81004-Q1, a four-channel low-side switch from Texas Instruments with integrated protection and diagnostic features. It features four N-channel MOSFETs with 700mΩ ON resistance,...
LCD IPS 0.87” White Display (ER-OLED0.87-1W) is a compact and high-contrast 0.87-inch white graphic OLED module developed by EastRising featuring a 128x32 resolution and driven by the SSD1316 controller. It supports I2C communication interface, and operates on a single 3.3V power supply. With its self-emissive OLED technology, it offers a free viewing...
GNSS 26 Click is a compact add-on board designed to provide accurate timing and standard precision positioning for advanced embedded applications. It is based on the LC26G-T (AA), a single-band multi-constellation GNSS receiver module from Quectel that supports GPS, GLONASS, Galileo, BDS, and QZSS systems. It features high sensitivity tracking down to...
Environment 7 Click is a compact add-on board designed for indoor environmental monitoring by measuring CO₂ concentration, temperature, and humidity. This board is based on the STCC4 and SHT40 digital sensors from Sensirion, combining CO₂ sensing with high-accuracy temperature and humidity measurement in a single platform. The STCC4 sensor provides...
Power Step Click is a compact add-on board designed for control of high-power two-phase bipolar stepper motors in industrial applications. It is based on the A4989SLD gate driver with integrated microstepping translator from Allegro Microsystems. This Click board uses external N-channel MOSFETs to deliver motor currents up to 20A at supply voltages from...
Liquid Level Sensor FS-SW (SW385) is a float-operated sensor designed for accurate and reliable detection of liquid levels in various systems. It features a durable polypropylene (PP) housing, a magnetic SPST switch for precise signal output, and rubber sealing for leak-proof operation. With IP65 protection, 10-bar pressure resistance, and compatibility...
ADC 27 Click is a compact add-on board for analog signal conversion in embedded applications. This board is based on the MAX1302, a 16-bit successive-approximation ADC from Analog Devices, known for its multirange input support and low power consumption. The MAX1302 offers eight single-ended or four differential input channels, each independently...
DC Motor 30 Click is a compact add-on board designed for intelligent control of brushed DC motors in embedded applications. It is based on the DRV8235 motor driver from Texas Instruments, a high-performance N-channel H-bridge driver with integrated speed regulation and stall detection. This Click board supports a wide input voltage range from 4.5V to 38V...
3D Hall 15 Click - I2C is a compact add-on board designed for precise 3D magnetic field measurement and angle calculation. It is based on the A31301EEJASR-XYZ-IC-06 3D linear Hall-effect sensor IC from Allegro Microsystems. The A31301 measures magnetic flux density across one, two, or all three axes with a range of ±600G and sensitivity of 26.8LSB/G,...
NINA-B416 Click is a compact add-on board that provides secure, long-range Bluetooth 5.1 Low Energy and NFC tag functionality for embedded applications. It is based on the NINA-B416 module from u-blox. The onboard module supports u-connectXpress software, allowing easy configuration via AT commands over UART, with full support for Bluetooth LE Serial Port...
LCD IPS 0.66” White Display (ER-OLED0.66-1W) is a compact and high-contrast 0.66-inch white graphic OLED module developed by EastRising featuring a 64x48 resolution and driven by the SSD1306 controller. It supports multiple communication interfaces including I2C, SPI, and 4/8-bit parallel, and operates on a single 3.3V power supply. With its self-emissive...
Loading
Load more
Loading
