Filter Product By
Slide and select filter/s
Filtered by
DIGI Isolator 2 Click is a compact add-on board that provides isolated digital input signals to your application. This board features the ISO1228, an eight-channel isolated digital input from Texas Instruments. It comes with 8-channel isolated 24V digital input receivers, with a current limit and diagnostics. The device also provides a field-side...
MIC33153 click is a DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads, with the voltage output up to 3.5V. The ultra-fast transient response and the ripple free output voltage are some of the main features of this DC-DC step-down converter. The proprietary HyperLight Load™...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Pressure 14 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the ABP2LANT060PG2A3XX, a piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full-scale pressure span and a temperature range from Honeywell Sensing and Productivity Solutions. This I2C...
Brushless 23 Click is a compact add-on board suitable for controlling BLDC motors with any microcontroller. This board features the TC78B011FTG, a three-phase sine-wave PWM pre-driver realized with six external MOSFETs to drive sensorless brushless motors from Toshiba Semiconductor. Some of the main features are a built-in closed-loop speed control...
Buck-Boost 4 Click is a compact add-on board that contains a buck-boost DC/DC converter with four integrated MOSFETs. This board features the TPS55289, a buck-boost converter from Texas Instruments. It can deliver on its output voltages from 0.8 up to 22V, from the input voltage in a range of 3 up to 30V. The output voltage can be programmed in 10mV...
Semper Flash 2 Click is a Click board™ which features the S25HL512T from Infineon, a perfect solution for the mass storage option in various embedded applications. With fast performance being one of its key features, Semper Flash 2 click can also be used for the code shadowing, execute-in-place (XIP), and data storage. The Infineon Semper Flash with Quad...
Color 4 Click is a compact add-on board providing an accurate color-sensing solution. This board features the VEML6040 from Vishay Semiconductors, a 16-bit RGBW color sensor offering spectral response through a compatible I2C interface. The VEML6040 is based on the Filtron™ technology and achieves the closest ambient light spectral sensitivity to...
Charger 11 Click is a LiFePO4 (lithium iron phosphate) battery charger. This click can be used for Low-Cost LiFePO4 battery chargers, or Power Tools, toys, backup energy storage solutions, etc. Charger 11 is based on MCP73123T controller which has some extra features enabling charging without too much hassle. This click board has charging current control...
Proximity 13 Click based on SI1153-AB09-GMR IC from Silicon Labs that can be used as an proximity, and gesture detector with I2C digital interface and programmable-event interrupt output. The host can send command the Proximity 13 click to initiate on-demand proximity measurements. The host can also place the click board in an autonomous operational state...
The MIC 3 Click is a Click board™ that features the SSM2167-1RMZ-R7, a Microphone Preamplifier, from Analog Device. This Click board™ is a low voltage Microphone preamplifier with Variable compression and noise gating. The MIC 3 Click is a very easy solution to work with it, which makes it an ideal solution for using it in desktop, portable or palmtop...
DAC 13 Click is a compact add-on board providing highly accurate digital-to-analog conversion. This board features the AD3541R, a low drift, single channel, 16-bit accuracy, voltage output digital-to-analog converter (DAC) from Analog Devices. The AD3542R operates with a fixed 2.5V reference, communicates with the host MCU through the SPI interface, and...
CAN FD 7 Click is a compact add-on board that contains a CAN transceiver that supports both CAN and CAN FD protocols. This board features the TCAN1462, an automotive fault-protected CAN FD transceiver from Texas Instruments. It is a high-speed Controller Area Network (CAN) transceiver that meets the ISO 11898-2:2016 high-speed CAN specification and the...
Speed up your TFT GUI prototype development with mikroC, mikroBasic or mikroPascal for dsPIC and PIC24 compiler and mikromedia for PIC24 development system. Buy this kit and save your time and money.
Speed up your prototype development with mikroC, mikroBasic or mikroPascal for 8051 compiler and Easy8051 v6 development system. Buy Easy Start Kit-8051 and save your time and money.
If you need more pins and a 240x64 GLCD with T6963C (Toshiba) for your prototype device than the Serial GLCD 240x64 Adapter Board is the best choice. It is connected to a 240x64 GLCD via an on-board serial port expander MCP23S17 that uses SPI.
Ozone Click is a compact add-on board that can add ozone detection and concentration monitoring to your application. This board features the MiCS-2614, a compact MOS sensor from SGX Sensortech. It is a robust MEMS sensor that works in harsh environments with a detection range from 10 to 1000 ppb. The Ozone sensors’ output is an analog voltage; thus, this...
mikroProg™ for MSP432 is a fast and reliable USB programmer and hardware debugger. This mikroProg supports the SimpleLink™ MSP432™ microcontroller family from Texas Instruments.
Magic RFID Click is a compact add-on board that contains an embedded RFID module. This board features the M6E-NANO, UHF RFID module with ultra-low power consumption from JADAK. Supporting the EPC Gen2V2 and ISO 18000-63 standard, the M6E-NANO module is available for global use. It operates in the Ultra High Frequency (UHF) band in a range from 859 up to...
mikroBasic PRO for FT90x Buy now Download
ADAC 2 Click is a compact add-on board providing an ADC/DAC combo solution. This board features the MAX22000, a 24-bit ADC, an 18-bit DAC, and an analog front-end (AFE) from Analog Devices. It allows users to create a software-configurable (SPI interface) input/output that supports all standard industrial analog interfaces: -10V to +10V analog input or...
The LV 24-33 v6 is a development system that supports 44-, 64-, 80- and 100-pin PIC24F, PIC24H and dsPIC33F MCUs. It comes with a PIC24FJ128GA010. It features a USB 2.0 programmer with mikroICD (In-Circuit Debugger), touch panel controller, MMC/SD card slot, etc.
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
DC Motor 15 Click is a compact add-on board that contains a motor driver with current sense and regulation. This board features the DRV8874, an integrated motor driver with N-channel H-bridge, charge pump, current sensing, and adjustment from Texas Instruments. Current sensing and regulation feature eliminates the need for a large power shunt resistor,...
Loading
Load more
Loading
