Filter Product By
Slide and select filter/s
Filtered by
Thermo 11 Click is a Click board™ equipped with the sensor IC, which can digitize temperature measurements between -55°C and +150°C so that the temperature measurement data can be processed by the host MCU. Thermo 11 click provides an accuracy of ±0.1°C in the range from -20°C to +50°C. The sensor used on this Click board™ has a great combination of...
EasyPIC Fusion v7 Empty MCUcard2 100pin TQFP PF. Card is not populated with components. Pin distance 100 mil.
Button G Click is a compact add-on board equipped with a tactile switch, sometimes called a push button, making it the simplest solution for adding a single push button to your design. This board features the 3006.2117, a tactile switch with integrated independent green LED from Marquardt. It provides a user interface tactile feel with visual feedback,...
ATA6570 click is a CAN Partial Networking interface board. The click carries the ATA6570, a high-speed CAN transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This IC has some unique features that make it a perfect choice for any embedded CAN application. It supports both CAN and CAN FD...
eFuse 4 Click is a compact add-on board with a power path protection solution that limits circuit currents and voltages to safe levels during fault conditions. This board features the TPS25940, an eFuse power switch with reverse current blocking from Texas Instruments. The TPS25940 features a full suite of protection and monitoring functions, including a...
Smart programmable touch 2.8'' display, packed with features. Mikromedia can be used for controlling a wide range of applications: from simple hobby projects, up to entire machine installations. It is powered by CY8C5868AXI-LP035 microcontroller unit, it gives you true power to build GUI-centric embedded applications.
Heart Rate 11 Click is a compact add-on board suitable for heart rate monitoring applications. This board features the OB1203, a multi-channel light sensor (LS/CS), a proximity sensor (PS), and a photoplethysmography sensor (PPG) from Renesas. It can be configured as an ambient light sensor to measure ambient light similar to the human eye experience or...
4-20mA T 2 Click is a compact add-on board for transmitting an analog output current over an industry-standard 4-20mA current loop. This board features DAC161S997, a low-power 16-bit ΣΔ digital-to-analog converter (DAC) from Texas Instruments. It has a programmable Power-Up condition and loop-error detection/reporting accessible via simple 4-wire SPI for...
The IrDA2 board features the MCP2120 infrared encoder/decoder placed between the UART and infrared (IR) optical transceiver.
Ribbon Cable 10-wire, Male/Male, 20 cm
Stretch Click is a compact add-on board for measuring stretch forces with conductive rubber cords. This board features circuitry that allows measuring the stretch forces of the 2mm diameter conductive rubber cord. This Click board™ comes equipped with the screw terminal, and two copper exposed pads, aside from the screw terminal, in addition to using the...
Environment 4 Click is a compact add-on board combining 4th-generation SHT humidity and SGP air-quality sensing solutions from Sensirion. This board features the SHT41A-AD1B I2C-configurable high-accuracy relative humidity/temperature and the SGP41, an MOx-based gas sensor. The SHT41A-AD1B offers a linear digital output alongside temperature/humidity...
UWB 3 Click is a compact add-on board that brings Ultra-Wideband communication to your application. This board features the DWM3001, a fully integrated UWB transceiver module from Qorvo. The module integrates the DW3110 IC, nRF52833 MCU, planar UWB antenna, accelerometer, power management, and crystal. It is a fully calibrated, tested, and validated...
Charger 8 Click is an intelligent Li-Ion battery charger, system power manager, and a battery fuel gauge Click board™. As a system power distributor, it can supply up to 2A to a connected load. By utilizing an externally connected power supply, it can charge a single-cell Li-Po/Li-Ion battery. A dedicated power management IC with the optimized smart power...
Arduino MKR Click Shield Combine Arduino MKR family with your favorite Click boards™ Start your project development with our Arduino MKR Click Shield fast and easy. The Arduino MKR board, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number of...
Temp&Hum 10 Click is a smart temperature and humidity sensing Click board™, aimed towards IoT applications, due to its extremely small size and very low power consumption. It can measure a wide range of temperature and relative humidity (RH) values with high accuracy. The sensor used on this Click board™ offers the complete measurement system:...
Line Follower Click is a compact add-on board that adds line following ability to your application based on infrared emission. This board features QRE1113, a miniature reflective object sensor from onsemi. With five QRE1113 sensors packed in an array, this Click board™ is capable of determining the exact position of the line. Each of the QRE1113 sensors...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
The mikroBuffer PROTO Board is used to buffer analog signals. There is a unity gain operational amplifier MCP6284 provided on the board.
Create your prototype devices with AVR microcontrollers immediately. Get Easy Start Kit - AVR with mikroC, mikroBasic or mikroPascal at affordable price.
Thermo 20 Click is a compact add-on board that provides an accurate temperature measurement. This board features the TSYS03, a miniature digital temperature sensor that comes up with factory calibrated, highly accurate temperature data from TE Connectivity. This temperature sensor characterized by its accuracy and high resolution offers digital output...
Mikromedia 4 CAPACITIVE shield is the perfect way to expand the functionalities of your mikromedia 4 CAPACITIVE with 4 mikroBUS™ sockets - add any functionality from our ever-growing range of Click boards™. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers. The board features 4 mikroBUS™ sockets...
Loading
Load more
Loading
