TFT with Touch Panel
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
Frontal Reset Button
If you place battery shield or integrate your board so that only front TFT is accessible, this reset button can be very handy.
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
We have added power indicator LED, so you can be sure whether your board has stable power supply.
Battery Charger circuit
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.
On-Board power regulator ensures that each part of the board get the right voltages.
RTCC Crystal Oscillator
Board contains 32.768kHz Crystal oscillator (X2) which provides external clock for internal RTCC module.
Stereo Audio codec
VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
16Mhz crystal oscillator circuit that provides external clock is connected to microcontroller osc pins.
On-board ADXL345 Digital Accelerometer allows you to measure acceleration.
Powerful CY8C5868AXI-LP035 microcontroller with the ARM Cortex-M3 core, operating at 67 MHz with 256 KB of Flash memory and up to 64kb of RAM.
Store 2 Mbit of data in FM25H20 Ferromagnetic RAM with up to 40 MHz SPI interface. It suports over 100 trillion Reads/Writes and has over 10 Year Data Retention.
microSD card slot
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
Pads for connecting and programming the board with mikroProg for PSoC® 5LP programmer.
Cortex Debug connector
The Cortex Debug Connector supports JTAG debug, Serial Wire debug and Serial Wire Viewer operations (via SWD connection when Serial Wire debug mode is used).