Filter Product By
Slide and select filter/s
Filtered by
ADC 2 Click is a compact add-on board with a high-performance data converter. This board features the MCP3551, a 22-bit precision ΔΣ analog-to-digital converter with SPI compatible interface (read-only) from Microchip. The MCP3551 has fully differential analog input making it compatible with a wide variety of industrial or process control applications,...
Terminal click is a mikroBUS™ socket expansion board, which provides an easy and elegant solution for adding the external connection capability to the click board™, plugged on a mikroBUS™. Featuring stacking headers makes it easy way for expanding the connectivity of the development system with the mikroBUS™, while keeping the bus free to use with any...
6DOF IMU 12 Click carries the ultra-low-power BMI270 from Bosch Sensortec, inertial measurement unit optimized for wearables providing precise acceleration, angular rate measurement and intelligent on-chip motion-triggered interrupt features. The 6-axis sensor combines a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer featuring Bosch’s...
I2C Isolator Click is a compact add-on board that offers completely isolated bidirectional communication. This board features the ISO1540, a low-power, 2.5kVrms bidirectional isolator compatible with the I2C interface from Texas Instruments. The ISO1540 has logic input and output buffers separated by Texas Instruments Capacitive Isolation technology using...
The UART Mux click is a Click board™ that switches the UART pins (RX and TX) from the mikroBUS™ to one of the four available outputs. It employs the SN74LV4052A, a Dual 4-Channel Multiplexer and Demultiplexer from Texas Instruments. It is designed for 2-V to 5.5-V VCC operation. Some of the typical applications for the SN74LV4052A include signal gating,...
mikroC PRO for AVR Buy now Download
MIC 2 click is equipped with a small electret microphone, accompanied by a suitable pre-amplifying circuit. The small electret microphone is not capable of providing sufficient line-level output; therefore, the pre-amp has to be used. The pre-amp circuit consists of a dual op-amp and a digitally controlled potentiometer IC. Thanks to the AD5171, it is...
This multiband LTE Flat Rotation Antenna with adjustable angle is an excellent choice for all 3G/4G LTE-based click boards from our offer, as well as other devices that require excellent throughput on all major cellular bands worldwide. The antenna has a distinctive flat surface with an SMA male connector on its end, which allows it to be mounted directly...
BLE 8 Click is fully embedded stand-alone Bluetooth 5.0 Energy connectivity module, equipped with the ANNA-B112, an ultra-small, high-performing, standalone Bluetooth low energy module for easy integration of Bluetooth low energy connectivity (BLE) into various electronic devices. This module combines a high-performance Arm® Cortex®-M4 CPU microprocessor...
WiFi 2 Click is a compact add-on board that provides a low-power WiFi solution to a host MCU. This board features the HLK-M30, a WiFi module with a built-in TCP/IP protocol stack from Hi-Link. This fully integrated module uses the IEEE802.11b/g/n standard in the 2.4-2.5GHz ISM frequency band that can work both in Station and Soft Access Point modes. In...
MikroBoard for ARM 64-pin is primarily intended to be connected to the EasyARM v6 development system but can also be used as a stand-alone device.
Air quality 3 click is the air quality measurement device, which is able to output both equivalent CO2 levels and total volatile organic compounds (TVOC) concentration in the indoor environment. The Click board™ is equipped with the CCS811 state-of-the-art air quality sensor IC from ScioSense, which has an integrated MCU and a specially designed metal...
Accel 2 Click is a compact add-on board that contains an acceleration sensor. This board features the LIS3DSH, a low-power factory-calibrated three-axis accelerometer from STMicroelectronics. The LIS3DSH allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±6g, ±8g, or ±16g in three axes with a configurable host interface that...
Our seventh generation dsPIC® development board. It’s loaded with modules you will need in development of your DSP applications. On-board programmer and debugger, CAN, sensors and many more. It is delivered with dsPIC30F4013 device. Note: Displays and click boards are not included in the package. Buy now Your dsPIC30® workstation Four...
H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor with up to 1.2A and 15V, providing control of the speed and direction, as well as the dynamic (rheostatic) braking capability. The Click board™ uses a...
BUZZ 2 click carries the CMT-8540S-SMT magnetic buzzer transducer. The buzzer’s resonant frequency is 4kHz. The click is designed to run on either 3.3V or 5V power supply.
CC3000 Click is a compact add-on board that sends and receives data over Wi-Fi. This board features the CC3000MOD, a Wi-Fi 802.11b/g SimpleLink™ series network processor from Texas Instruments. The TI’s SimpleLink™ is a platform with industry-leading features, including low power and robustness, and integrates security support with more than ten...
NFC 4 Click is a compact add-on board that contains an NFC transceiver for contactless communication. This board features the ST25R3916, a multi-purpose NFC transceiver supporting passive peer-to-peer functionality and NFC card-emulation mode, as well as NFC reader operation from STMicroelectronics. It features high RF output power to directly drive an...
MPU IMU Click is a compact add-on board that can detect movement and acceleration. This board features the MPU-6000, an integrated 6-axis motion device from TDK InvenSense that combines a 3-axis gyroscope and accelerometer alongside a DMP (digital motion processor). The Digital Motion Processor engine is capable of processing complex 9-axis MotionFusion...
Flip&Click PIC32MZ is a two-sided development board with a split personality. It can be used with chipKIT core (Arduino-style development environment), but it can also be used with mikroC, mikroBasic, and mikroPascal for PIC32. It’s a beginner-friendly rapid prototyping tool expandable with up to four Click boards.
If your prototype device needs more memory space then the SerialFlash PROTO Board is an excellent choice. The on-board EN25F80 circuit provides additional 8Mbit flash memory via a Serial Peripheral Interface (SPI). Ready-to-use examples comes with board.
WiFly Click is a compact add-on board that allows you to connect your host microcontroller to 802.11b/g/n wireless networks. This board features the RN-131, a standalone embedded wireless 802.11b/g/n networking module from Microchip. The WiFly module incorporates a 2.4GHz radio, processor, TCP/IP stack, real-time clock, crypto accelerator, and power...
On-board programmer with ICD support with miniUSB programmer connector. Board carries PIC18F4520 MCU from Microchip, it's regulated with 5V power regulator circuit.
Barometer Click is a compact add-on board that measures air pressure in a specific environment. This board features STMicroelectronics LPS25HB, a piezoresistive absolute pressure sensor that functions as a digital output barometer. The LPS25HB measures pressure from 260hPa to 1260hPa over a wide operating temperature range providing a relative pressure...
Loading
Load more
Loading
