Filter Product By
Slide and select filter/s
Filtered by
Joystick 4 Click is a compact add-on board that provides precise and reliable input control for various interactive projects. This board features the 2434804-1, a 5-position tactile switch from the ALCOSWITCH series by TE Connectivity. The switch features an extended top actuator for precise input detection, a stainless steel contact base, and silver...
LTE Cat.1 6 Click is a compact add-on board with global coverage for wireless communication over LTE, UMTS, and GSM networks. This board features the SIM7600SA, a LTE Cat 1 module from SIMCom, supporting LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE communication modes. Key features include multi-band LTE support, auxiliary diversity, and optional...
Nixie Power Click is a booster Click board™ designed to provide high voltage for powering Nixie Tube Shields. This board features the LM2577 step-up voltage regulator enabling a two-stage boost conversion from 5V to 150V. It also integrates a 16-bit I/O expander MCP23017 for precise Shields control via the I2C interface and ADDR SEL jumpers for easy I2C...
Intel® Joule™ Click SHIELD is an extension for Intel® Joule™ Expansion Board. This click shield allows you to add more than 700 click boards™ to your project. Add displays, WiFi, ZigBee or Bluetooth transceivers, Ethernet modules, sensors, MP3 codec circuit and other features to your prototype with ease.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Power MUX 2 Click is a compact add-on board that contains a highly configurable power mux. This board features the TPS2121, a dual-input single-output power multiplexer with an automatic switchover feature from Texas Instruments. This Click board™ prioritizes the main supply when present and quickly switches to auxiliary supply when the main supply drops....
168 positions high-speed female SMT connector, compatible with SiBRAIN add-on boards.
Current 5 Click is a compact add-on board that provides a precise and accurate current sensing solution. This board features the INA381, a high-speed current-sense amplifier with an integrated comparator from Texas Instruments. This device has selectable operating modes (transparent or latched) and detects overcurrent conditions by measuring the voltage...
RTC 17 Click is a compact add-on board that accurately keeps the time of a day. This board features the RV5C387A, a CMOS real-time clock with a built-in interrupt generation function from Nisshinbo Micro Devices Inc, to perform serial transmission of time and calendar data to the MCU. The BU9873 provides information like year, month, day, weekday, hours,...
DC Motor 27 Click is a compact add-on board that contains a high-performance brushed DC motor driver. This board features the DRV8143, an automotive half-bridge driver with integrated current sense and diagnostic from Texas Instruments. It is designed in a BiCMOS high-power process technology node and has an operating range of 4.5V up to 35V. The driver...
MRAM 4 Click is a compact add-on board representing a magneto-resistive random-access memory solution. This board features the EM064LXQADG13IS1R, an industrial STT-MRAM persistent memory from Everspin Technologies. It is a 64Mb MRAM IC RAM and can achieve up to 200MHz as a single and double data rate (STR/DTR). The MRAM technology is analog to Flash...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
Nixie IN-12B is an add-on shield board that features a pre-installed IN-12B Nixie tube, designed for easy driving and control of numerical displays. This shield integrates high-voltage FETs for reliable and efficient numerical display management and features carefully designed connectors that ensure proper alignment and prevent incorrect connections. The...
BIGdsPIC6 80-pin TQFP 1 MCU Card Empty PCB
CODEGRIP for Tiva is a fast USB-C and WiFi programmer and hardware debugger. It supports ARM Cortex M4 based MCUs. The package contains: Damage resistant protective box CODEGRIP for Tiva CODEGRIP ADAPT V1 - 10 pin 0.10" pitch ARM Cortex Debug adapter WiFi Antenna right angle SMA User Manual USB-C cable USB-C Female to USB-A Male Adapter Flat...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
TFT Board 4 Capacitive with frame is a 4.3" display board which features the standardized 2x20-pin display connector. The display board also integrates a capacitive multitouch panel with swipe and zoom gesture support. The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and...
168 positions high-speed male SMT connector, compatible with SiBRAIN add-on boards.
for PIC32MZ CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications
LED Ring 2 Click is a compact add-on board that provides a circular-shaped electronic lighting solution. This board features three I2C-configurable high-performance LED matrix drivers, the LP5862 from Texas Instruments. The LP5862 integrates 18 constant current sinks for driving 18 yellow LEDs. With the help of two additional LP5862 drivers, it is...
PIR 2 Click is a compact add-on board designed for high-performance motion detection applications. This board features the ZSLM323511, a dual-element balanced differential pyroelectric (PIR) sensor from Zilog (Littlefuse). Key features include excellent EMI immunity, a low-profile surface mount package, and a typical field of view of 150 degrees on the...
Fan 9 Click is a compact add-on board designed for high-power fan applications requiring low noise and minimal vibration. This board features the A5932, an automotive-grade three-phase sinusoidal sensorless fan controller from Allegro Microsystems. This board operates with a power supply range of 12V to 42V, using a sinusoidal drive to reduce audible...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
Loading
Load more
Loading
