Filter Product By
Slide and select filter/s
Filtered by
Temp&Hum 19 Click is a compact add-on board that represents temperature and humidity sensing solution. This board features the BPS240, a highly accurate relative humidity and temperature sensor from Bourns. This sensor, characterized by its high accuracy (±2% from 20% to 80%RH (±4% over entire humidity range)) and high resolution, provides 10-bit data...
Step Down 3 Click is a compact add-on board that steps down the voltage from its input to its output. This board features the ST1PS03, a nano-quiescent miniaturized synchronous step-down converter with a load switch from STMicroelectronics. The ST1PS03 can provide up to 400mA output current with an input voltage ranging from 1.8V to 5.5V, specifically...
Vibration ERM Motor 10K RPM 3V (VZ43FC1B5640007) represents the Eccentric Rotating Mass vibration motor (ERM), also known as a pager DC motor, with an offset (non-symmetric) mass attached to the shaft specially designed by Vybronics. This SMD reflow solderable vibration motor draws a maximum of 100mA while producing the highest G force/vibration energy of...
BarGraph 10-Seg Red (JSB-R102510ZR) is a high-quality 10-segment red color bar graph LED display measuring 25.5x10.10x7.9mm. The segments of this bar graph LED display are bright and uniformly colored, providing a nice and clean visual feedback drawing about 20mA of current. It is suitable for displaying various properties, whether an audio level,...
Ai-WB2-12F Click is a compact add-on board for easy integration into the Internet of Things (IoT) and smart home applications. This board features the Ai-WB2-12F, a WiFi and BLE module from Ai-Thinker Technology, powered by the BL602 chip supporting WiFi 802.11b/g/n and BLE 5.0 protocols. With a low-power 32-bit RISC CPU, 276KB of RAM, and various...
2x4 RGB Click is a compact add-on board for dynamic and colorful lighting control. This board features an array of 2x4 RGB LEDs (WL-ICLED 1312121320437) from Würth Elektronik, featuring individual control of each red, green, and blue component via an integrated IC and pulse width modulation (PWM) technology. The board also includes an LSF0102 voltage...
Thermostat 5 Click is a compact add-on board designed for precise temperature monitoring and control of external devices. This board features the MCP6022 operational amplifier and MCP3221 A/D converter, both from Microchip, ensuring accurate signal processing. The board features an NTC connector for temperature sensing, a dual-mode signal processing...
GNSS RTK 4 Click is a compact add-on board designed for high-precision GNSS positioning with real-time kinematics (RTK) support. This board features the LG290P, a quad-band GNSS module from Quectel, capable of receiving signals from GPS, GLONASS, Galileo, BDS, QZSS, and NavIC while using SBAS for enhanced accuracy. This board supports multi-mode RTK...
High Speed Thermal Print Head - 4.2V-9.5V (M23-DH-H69) is designed for fast, high-resolution thermal printing in compact electronic systems. It features a direct line thermal printing method with a resolution of 8 dots/mm, a 48mm maximum print width, and supports speeds up to 100mm/s. Operating within a voltage range of 4.2V to 9.5V, it includes a...
48-pin EasyPSoC MCU Cards with different microcontrollers soldered on them. These cards are compatible with our EasyPSoC development system.
Accel 27 Click is a compact add-on board that contains an acceleration sensor. This board features the ADXL373, a three-axis MEMS ±400g accelerometer from Analog Devices. In addition to its ultra-low power consumption, the ADXL373 enables impact detection while providing system-level power reduction. It offers 12-bit output data at 200mg/LSB scale factor...
Buck 15 Click is a compact add-on board for precision voltage regulation across various applications. This board features the TPS62903, a synchronous step-down DC/DC converter from Texas Instruments. It is known for its adaptability, rapid transient response, and high output voltage accuracy of ±1.5% across all operating temperatures. Featuring the...
EEPROM 16 Click is a compact add-on board designed for reliable non-volatile memory storage in automotive and industrial systems. This board features the NV25320LV, a 32Kb Serial EEPROM from onsemi, organized as 4K x 8 bits. It uses SPI communication, supports both software and hardware write protection, and includes a 32-byte page write buffer for...
The essential development kit for all your graphic interface projects Open the box full of wonders. Start development right away, everything you could need is there. It’s the perfect toolbox - the mikromedia workStation v7 is the best development environment for mikromedia boards – your stepping stone. The Visual TFT software and compiler license will...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
EasyPIC v8 for PIC24/dsPIC33 EasyPIC v8 for PIC24/dsPIC33 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyPIC v8 for PIC24/dsPIC33 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP...
Brushless 24 Click is a compact add-on board for controlling brushless DC (BLDC) motors with any MCU. This board features the DRV10866, a 3-phase sensorless motor driver from Texas Instruments with integrated MOSFETs capable of driving current up to 800mA in peak. The DRV10866 also has a 150° sensorless BEMF control scheme implemented for a 3-phase...
GNSS L-Band Active Antenna (LBAND01D-S6-00) is an active patch antenna from Inpaq Technology, optimized for the GNSS L-Band. The antenna has a 3m cable with SMA PLUG male connector on the end, allowing easy positioning. This is the right product if you want a perfect active antenna for positioning and timing system applications. NOTE: Order on Request...
Cooler Click is a compact add-on board designed as a cooling solution to manage heat in electronic systems efficiently. This board features the DRV8213, a brushless DC motor driver from Texas Instruments, ensuring a high-performance operation. This board also directly integrates a TMP007 temperature sensor and an MF25060V2-1000U-A99 cooling fan onto its...
Light 2 Click is a compact add-on board designed for accurate and flexible light measurement in various environments. This board features the ISL76682, a high-sensitivity, light-to-digital sensor with an I2C interface from Renesas, made specifically for automotive applications. Key features include a photodiode array that closely mimics the human eye's...
Plastic enclosure for Clicker 4 (the C7016014 from OKW) is designed to protect and securely house Clicker 4 products from MIKROE. This two-piece enclosure features a durable ABS/PC construction, offering high resistance to dust, water, and impacts, meeting IP 66, IP 67, and IK 07 protection standards. It includes a transparent top for the visibility of...
BL653 Click is a compact add-on board for long-range Bluetooth Low Energy (LE) connectivity in next-generation industrial IoT applications. This board features the BL653 module from Ezurio and is powered by Nordic’s nRF52833 silicon; it integrates a powerful Cortex-M4F microcontroller with 512kB flash memory and 128kB RAM. It supports Bluetooth v5.4...
Glass Indoor Solar Cell (1-cell) – 41x26mm (AMG-1401C), commonly known as Amorphous Silicon Solar Cell (Amorton), is a hydrogenated amorphous silicon (a-Si:H) solar cell designed for energy harvesting in indoor environments. The high-performance AMG-1401C solar cell is built on a glass substrate for optimal efficiency and durability. With a nearly perfect...
6DOF IMU 26 Click is a compact add-on board designed to detect and measure angular rate and linear acceleration across three axes. This board features the SCH16T-K01, a high-performance 6DOF sensor that integrates a 3-axis gyroscope and a 3-axis accelerometer from muRata. The board features a selectable measurement range for both sensors, low-pass...
Loading
Load more
Loading
