Filter Product By
Slide and select filter/s
Filtered by
Convert SOIC-SOP 16 pins (300 mil wide) package to DIP 16 pins.
Stretch Click is a compact add-on board for measuring stretch forces with conductive rubber cords. This board features circuitry that allows measuring the stretch forces of the 2mm diameter conductive rubber cord. This Click board™ comes equipped with the screw terminal, and two copper exposed pads, aside from the screw terminal, in addition to using the...
Heart Rate 11 Click is a compact add-on board suitable for heart rate monitoring applications. This board features the OB1203, a multi-channel light sensor (LS/CS), a proximity sensor (PS), and a photoplethysmography sensor (PPG) from Renesas. It can be configured as an ambient light sensor to measure ambient light similar to the human eye experience or...
4-20mA T 2 Click is a compact add-on board for transmitting an analog output current over an industry-standard 4-20mA current loop. This board features DAC161S997, a low-power 16-bit ΣΔ digital-to-analog converter (DAC) from Texas Instruments. It has a programmable Power-Up condition and loop-error detection/reporting accessible via simple 4-wire SPI for...
UWB 3 Click is a compact add-on board that brings Ultra-Wideband communication to your application. This board features the DWM3001, a fully integrated UWB transceiver module from Qorvo. The module integrates the DW3110 IC, nRF52833 MCU, planar UWB antenna, accelerometer, power management, and crystal. It is a fully calibrated, tested, and validated...
Environment 4 Click is a compact add-on board combining 4th-generation SHT humidity and SGP air-quality sensing solutions from Sensirion. This board features the SHT41A-AD1B I2C-configurable high-accuracy relative humidity/temperature and the SGP41, an MOx-based gas sensor. The SHT41A-AD1B offers a linear digital output alongside temperature/humidity...
The IrDA2 board features the MCP2120 infrared encoder/decoder placed between the UART and infrared (IR) optical transceiver.
Ribbon Cable 10-wire, Male/Male, 20 cm
Charger 8 Click is an intelligent Li-Ion battery charger, system power manager, and a battery fuel gauge Click board™. As a system power distributor, it can supply up to 2A to a connected load. By utilizing an externally connected power supply, it can charge a single-cell Li-Po/Li-Ion battery. A dedicated power management IC with the optimized smart power...
Arduino MKR Click Shield Combine Arduino MKR family with your favorite Click boards™ Start your project development with our Arduino MKR Click Shield fast and easy. The Arduino MKR board, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number of...
Temp&Hum 10 Click is a smart temperature and humidity sensing Click board™, aimed towards IoT applications, due to its extremely small size and very low power consumption. It can measure a wide range of temperature and relative humidity (RH) values with high accuracy. The sensor used on this Click board™ offers the complete measurement system:...
Line Follower Click is a compact add-on board that adds line following ability to your application based on infrared emission. This board features QRE1113, a miniature reflective object sensor from onsemi. With five QRE1113 sensors packed in an array, this Click board™ is capable of determining the exact position of the line. Each of the QRE1113 sensors...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
The mikroBuffer PROTO Board is used to buffer analog signals. There is a unity gain operational amplifier MCP6284 provided on the board.
Smart programmable touch 2.8'' display, packed with features. Mikromedia can be used for controlling a wide range of applications: from simple hobby projects, up to entire machine installations. It is powered by CY8C5868AXI-LP035 microcontroller unit, it gives you true power to build GUI-centric embedded applications.
eFuse 4 Click is a compact add-on board with a power path protection solution that limits circuit currents and voltages to safe levels during fault conditions. This board features the TPS25940, an eFuse power switch with reverse current blocking from Texas Instruments. The TPS25940 features a full suite of protection and monitoring functions, including a...
I2C Extend 2 Click is a compact add-on board suitable for I2C communication bus extension. This board features the PCA9615, a 2-channel multipoint differential I2C bus buffer with hot-swap logic from NXP Semiconductors. The PCA9615 converts the two default I2C signals into four differential signals, two for SCL and two for SDA. The differential signals...
Ribbon Cable 26-wire, Female IDC/Male, 20 cm
Thermo 20 Click is a compact add-on board that provides an accurate temperature measurement. This board features the TSYS03, a miniature digital temperature sensor that comes up with factory calibrated, highly accurate temperature data from TE Connectivity. This temperature sensor characterized by its accuracy and high resolution offers digital output...
Mikromedia 4 CAPACITIVE shield is the perfect way to expand the functionalities of your mikromedia 4 CAPACITIVE with 4 mikroBUS™ sockets - add any functionality from our ever-growing range of Click boards™. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers. The board features 4 mikroBUS™ sockets...
Air Quality 11 Click is a compact add-on board for monitoring and analyzing indoor air quality. This board features the ENS161, a multi-gas sensor from ScioSense based on metal oxide (MOX) technology, to detect a range of volatile organic compounds with high sensitivity. The board supports I2C and SPI communication protocols, allowing flexible integration...
Smoke Click is a compact add-on board that can detect the presence of smoke. This board features the MAX30105, a high-sensitivity optical sensor for smoke detection applications from Analog Devices. It provides a complete system solution to ease the design-in process of smoke detection applications, including fire alarms. The sensor can detect a wide...
Loading
Load more
Loading
