Filter Product By
Slide and select filter/s
Filtered by
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
EasyPIC v8 for PIC24/dsPIC33 EasyPIC v8 for PIC24/dsPIC33 is packed in the protective box along with the relevant documentation. The package contains: Damage resistant protective box EasyPIC v8 for PIC24/dsPIC33 board Adapter - USB-C Female to USB-A Male Adapter - USB Micro Female to USB-C Male USB cable Board Schematic User Manual CODEGRIP...
Ai-WB2-12F Click is a compact add-on board for easy integration into the Internet of Things (IoT) and smart home applications. This board features the Ai-WB2-12F, a WiFi and BLE module from Ai-Thinker Technology, powered by the BL602 chip supporting WiFi 802.11b/g/n and BLE 5.0 protocols. With a low-power 32-bit RISC CPU, 276KB of RAM, and various...
LTE Cat.4 Click (for Europe) is a compact add-on board made specially for 4G M2M and IoT applications in Europe. This board features the EG95EXGA-128-SGNS, an IoT/M2M-optimized LTE Cat.4 module that meets the 3GPP Release 11 standard from Quectel. It supports multiple wireless standards, including LTE-FDD, WCDMA, and GSM, ensuring broad network...
SiBRAIN Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their...
LTE Cat.1 6 Click is a compact add-on board with global coverage for wireless communication over LTE, UMTS, and GSM networks. This board features the SIM7600SA, a LTE Cat 1 module from SIMCom, supporting LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE communication modes. Key features include multi-band LTE support, auxiliary diversity, and optional...
Accel 34 Click is a compact add-on board for precise motion detection and monitoring applications. This board features the ADXL382-2, a wide bandwidth 3-axis MEMS accelerometer from Analog Devices. It offers user-selectable measurement ranges of ±15g, ±30g, and ±60g with high sensitivity, low noise density, and efficient power consumption, making it...
Ambient 24 Click is a compact add-on board used to precisely measure ambient light intensity in various lighting conditions. This board features the VEML4031X00, a high-resolution 16-bit digital ambient light sensor from Vishay Semiconductor. This sensor features a highly sensitive photodiode, a low-noise amplifier, and an advanced 16-bit A/D converter,...
Liquid Level Sensor FS-SW (SW385) is a float-operated sensor designed for accurate and reliable detection of liquid levels in various systems. It features a durable polypropylene (PP) housing, a magnetic SPST switch for precise signal output, and rubber sealing for leak-proof operation. With IP65 protection, 10-bar pressure resistance, and compatibility...
The essential development kit for all your graphic interface projects Open the box full of wonders. Start development right away, everything you could need is there. It’s the perfect toolbox - the mikromedia workStation v7 is the best development environment for mikromedia boards – your stepping stone. The Visual TFT software and compiler license will...
PAC1720 Click is a compact add-on board that contains an energy monitoring solution. This board features the PAC1720, an I2C configurable dual high-side bidirectional current sensing monitor with precision voltage measurement capabilities from Microchip Technology. The PAC1720 measures the voltage developed across external sense resistors to represent the...
VU Meter Click is a compact add-on board representing a volume unit meter that displays the intensity of an audio signal. This board features the LM3914, a monolithic integrated circuit that senses analog voltage levels and drives a 10-segment bar graph display from Texas Instruments. This Click board™ is manufactured with a sound detecting device...
Brushless 24 Click is a compact add-on board for controlling brushless DC (BLDC) motors with any MCU. This board features the DRV10866, a 3-phase sensorless motor driver from Texas Instruments with integrated MOSFETs capable of driving current up to 800mA in peak. The DRV10866 also has a 150° sensorless BEMF control scheme implemented for a 3-phase...
GNSS L-Band Active Antenna (LBAND01D-S6-00) is an active patch antenna from Inpaq Technology, optimized for the GNSS L-Band. The antenna has a 3m cable with SMA PLUG male connector on the end, allowing easy positioning. This is the right product if you want a perfect active antenna for positioning and timing system applications. NOTE: Order on Request...
Accel 27 Click is a compact add-on board that contains an acceleration sensor. This board features the ADXL373, a three-axis MEMS ±400g accelerometer from Analog Devices. In addition to its ultra-low power consumption, the ADXL373 enables impact detection while providing system-level power reduction. It offers 12-bit output data at 200mg/LSB scale factor...
Buck 15 Click is a compact add-on board for precision voltage regulation across various applications. This board features the TPS62903, a synchronous step-down DC/DC converter from Texas Instruments. It is known for its adaptability, rapid transient response, and high output voltage accuracy of ±1.5% across all operating temperatures. Featuring the...
SPI Isolator 9 Click is a compact add-on board designed for secure and reliable SPI communication across isolated domains. This board features the 4DIR1421H, a quad-channel digital isolator from Infineon, known for precise data communication and low power consumption. Featuring Infineon's ISOFACE™ Coreless Transformer (CT) technology, it provides...
TDS Click is a compact add-on board used to measure Total Dissolved Solids (TDS) in water, providing an accurate indicator of water quality. This board features the CD4060B oscillator from Texas Instruments, supported by the LMV324 op-amp, MCP3221 ADC from Microchip, and dual-voltage regulation using LP2985AIM5-3.0 and ADM8829. It features a multi-stage...
Electric Magnetic Valve G3/4 FPD (FPD-270A) is a compact, all-copper, normally closed solenoid valve designed for water inlet control in home appliances and industrial systems. It operates on DC 12V, supports pressures from 0.02 to 0.8MPa, and handles flow rates up to 15 L/min. With high durability (50,000 cycles), strong pressure resistance (2MPa), and...
IR Grid 5 Click is a compact add-on board that provides precise thermal imaging and non-contact temperature measurement capabilities for various embedded applications. It is based on the MLX90642, a fully calibrated 32x24-pixel thermal infrared (IR) array imager from Melexis, which integrates 768 FIR pixels and an internal temperature reference sensor for...
mikroLab for AVR L is the go-to development solution for 64 and 100 pin AVR microcontrollers. The kit carries a BIGAVR6 board, a mikroC for AVR compiler license, an assortment of accessories, as well as a free license for Visual GLCD (valued at $99).
for Kinetis Capacitive FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 5 for Kinetis Capacitive FPI with frame is not limited to multimedia-based applications only. USB, WiFi and RF connectivity options, digital motion sensor, battery charging...
for STM32F2 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 4 for STM32F2 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more...
eFuse 3 Click is a compact add-on board that contains an electronic eFuse. This board features the NIS6150, a resettable fuse that can significantly enhance the reliability of a USB application from both catastrophic and shutdown failures from onsemi. It is designed to buffer the load device from the excessive input voltage, which can damage sensitive...
Loading
Load more
Loading
