Filter Product By
Slide and select filter/s
Filtered by
Categories
MIKROE is proud to collaborate with Texas Instruments, a global leader in analog and embedded processing. This strategic partnership allows us to integrate TI's industry-proven semiconductors into our wide range of development tools, helping engineers and developers reduce design complexity and accelerate time-to-market.
As an authorized third-party tool provider, we offer an extensive portfolio of Texas Instruments-based solutions, including:
1. Click boards™, featuring TI’s high-performance components across 12 subcategories:
2. Development Boards, such as ARM® (32-bit) platforms built with TI MCUs, providing robust hardware for advanced embedded applications
3. Starter Boards for ARM® (32-bit) to kickstart your development
4. Programmers and Debuggers optimized for ARM® (32-bit) architectures using Texas Instruments chips
5. Smart Displays in 2.8”, 3.5”, 4.3”, and 5” sizes, combining intuitive interfaces with TI-based embedded control
6. MCU Cards for ARM® (32-bit), enabling scalable system prototyping with TI microcontrollers
Whether you're designing for IoT, industrial automation, audio systems, or motor control, MIKROE’s TI-powered tools provide the flexibility, reliability, and scalability needed to bring your ideas to life.
Explore our Texas Instruments-based portfolio and build faster with ready-to-use hardware backed by software libraries, documentation, and expert support.
SPI Isolator 2 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface. This board features the ISO7741, a high-performance quad-channel digital isolator with a double capacitive silicon dioxide insulation barrier capable of galvanic isolation up to 5000Vrms from Texas Instruments. The ISO7741 provides...
SPI Isolator 8 Click is a compact add-on board representing a digital isolator optimized for a serial peripheral interface. This board features the ISOW7743, a quad-channel digital isolator from Texas Instruments. This device has a maximum data rate of 100Mbps and transfers digital signals between circuits with different power domains featuring reinforced...
Standard empty MCU card for 100-pin TQFP Stellaris® 1000 series. Card is not populated with components. Pin distance 100mil.
Standard empty MCU card for 100-pin TQFP Stellaris® 3000 series. Card is not populated with components. Pin distance 100mil.
Standard empty MCU card for 144-pin TQFP Stellaris® LM4F series. Card is not populated with components. Pin distance 100mil.
Standard empty MCU card for 48-pin TQFP Stellaris® x00 series. Card is not populated with components. Pin distance 100mil.
Standard empty MCU card for 64-pin TQFP Stellaris® 3000 series. Card is not populated with components. Pin disatnce 100mil.
LM4F232H5QD belongs to ARM® Cortex™-M4 family. It has 80MHz operation, 256K bytes of flash memory , 32K bytes of SRAM memory and 2K bytes of EEPROM memory.
Step Down 10 Click is a compact add-on board that converts higher voltages into a lower voltage level. This board features the TPSM63610, a high-density synchronous buck DC/DC power module with enhanced HotRodTM from Texas Instruments. It is a highly integrated DC/DC solution that combines power MOSFETs, a shielded inductor, and passives. It uses voltages...
Step Down 11 Click is a compact add-on board that converts higher voltages into lower voltage levels. This board features the TPSM82913, a low-noise and low-ripple buck power module from Texas Instruments. It is a fixed-frequency current-mode converter module with a filtered internal reference to achieve a low-noise output similar to low-noise LDOs. It...
Step Down 12 Click is a compact add-on board for reliable DC-DC step-down applications. Based on Texas Instruments' TPS62902 synchronous step-down converter, it features the DCS-Control topology, which combines hysteretic, voltage mode, and current mode control for precision and fast response to voltage changes. Supporting a wide input voltage range of 3V...
Step Down 5 Click is a compact add-on board that converts a higher voltage into a lower voltage level. This board features the TPS628510, a high-efficiency, easy-to-use, synchronous step-down DC/DC converter from Texas Instruments. The TPS628510 can provide up to 500mA output current with an input voltage ranging from 2.7V to 6V, specifically designed for...
Step Up 2 Click is a compact add-on board designed to boost the power capabilities of devices. This board features the TPS61299, a synchronous boost converter from Texas Instruments. This component is renowned for its low quiescent current and high efficiency under light-load conditions. The board distinguishes itself with the ability to adjust output...
The Stepper 14 Click is a Click board™ that features the DRV8847PWPR, a step motor driver, from Texas Instruments. This Click board™ provides a bipolar step motor controle, It features an H-bridge bipolar step motor driver, which supports full-, half-, quarter-, or eighth-step modes. This click board™ also carries a port expander so that the communication...
Stepper 15 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the DRV8889A, an automotive stepper driver with integrated current sense and stall detection from Texas Instruments. It supports up to 1.5A full-scale current with an internal microstepping indexer, smart tune decay technology, advanced stall...
Stepper 18 Click is a compact add-on board that contains a microstepping stepper motor driver. This board features the DRV8426, a stepper motor driver for industrial and consumer applications from Texas Instruments. It is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing capable of...
Stepper 19 Click is a compact add-on board for precise control over stepper motors. This board features the DRV8424, a stepper motor driver from Texas Instruments designed to drive both industrial and consumer stepper motors. The DRV8424 has dual N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing, eliminating...
Stepper 21 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the DRV8825, a stepper motor controller integrated circuit from Texas Instruments. It is a PWM micro-stepping stepper motor driver with up to 1/32 micro-stepping resolution and a built-in micro-stepper indexer. The driver has two H-bridge drivers...
Stepper 22 Click is a compact add-on board designed for precise motion control of bipolar stepper motors and brushed DC motors. This board features the DRV8711, a bipolar stepper motor gate driver from Texas Instruments, which uses external N-channel MOSFETs to drive motors with up to 5A of output current. The board features a wide range of microstepping...
Stepper 25 Click is a compact add-on board designed for precise control of bipolar stepper motors. This board features the DRV8452, a high-power stepper motor driver from Texas Instruments, known for its high performance and integration. The board supports a wide supply voltage range from 4.5V to 55V and delivers up to 5A full-scale or 3.5A RMS output...
Stepper 3 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the ULN2003A, a high-voltage, high-current Darlington transistor array from Texas Instruments. It is designed to drive unipolar stepper motors with a supply voltage applied to the common wire. The current flows through the common wire and the motor...
Stepper 6 click is the complete integrated bipolar step motor driver solution. It comes with the abundance of features that allow silent operation and optimal working conditions for the connected motor. A specialized integrated driver chip on this Click board™ far exceeds the capabilities of similar, commonly used step motor drivers. It comes in the...
StereoAmp Click is a compact add-on board that contains a stereo amplifier. This board features two LM48100Qs, BoomerTM mono audio power amplifiers with output fault detection and volume control from Texas Instruments. When operates from a 5V supply, the amplifiers can deliver 1.3W of continuous output power to an 8Ω load. The high-power supply rejection...
TDC Click is a compact add-on board that recognizes events and provides a digital representation of the time they occurred. This board features the TDC7200, a time-to-digital converter from Texas Instruments. The Time to Digital Converter (TDC) performs the function of a stopwatch and measures the elapsed time (time-of-flight or TOF) between a START pulse...
Loading
Load more
Loading
