Filter Product By
Slide and select filter/s
Filtered by
H-Bridge 16 Click is a compact add-on board with an H-Bridge gate driver, also known as a full-bridge pre-driver. This board features the DRV8262, a dual H-Bridge motor driver from Texas Instruments. The motor driver is designed for a variety of industrial applications and can drive one or two brushed DC motors, one stepper motor, and one or two...
ECG/EMS/GSR cable is a durable 1.5 m long insulated copper cable, with a small 3.5 mm jack on one end and the electrode holders on the other end. The cable is used to securely connect the electrodes to the appropriate click board™. The two electrode holders consist of a metal piece that has a dent in the middle, that perfectly fits the rivets on the...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
LPCXpresso Click Shield Expand functionalities of your boards Xpressly LPCXpresso Click Shield designed to support multiple NXP development platforms which use Arduino connector and equip them with two mikroBUS sockets. Start your development with ease on LPCXpresso platform and get immediate access to hundreds of Click boards in our offer.
SiBRAIN is a standardized microcontroller add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the SiBRAIN Card socket. By introducing the new SiBRAIN standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs,...
Thermo 27 Click is a compact add-on board for accurate temperature measurements. This board features the TMP114, a high-accuracy digital temperature sensor from Texas Instruments. The TMP114 consists of an internal thermal BJT factory-calibrated sensor, 16-bit ADC, and a digital signal processor, offering a high accuracy of ±0.3°C and a temperature...
Thin Film Element RTD Temperature Sensor, the NB-PTCO-154 from TE Connectivity, is designed for precise and reliable temperature measurement across various applications. This sensor has a platinum thin-film temperature element with ceramic construction and ensures superior stability, repeatability, and durability. Its Ni/Au wire cladding and open-end...
Ambient 4 click is a light intensity-sensing and measuring Click board™, which features an accurate, light-intensity sensor labeled as BH1721FVC, made by ROHM Corporation. It offers a high measurement accuracy in the range between 1x to 1.35x of the actual light intensity. The spectral response of the sensor is calibrated to closely match the spectral...
MUX 2 click is a Click board™ that switches one of the eight inputs to one output. It employs the MUX508, a modern CMOS analog multiplexing integrated circuit, produced by Texas Instruments. This IC can be powered with both dual power supplies, ranging from ±5V to ±18V, and single power supplies, ranging from 10V to 36V. It offers rail-to-rail operation,...
Audio Xover Click is a compact add-on board designed to manage frequency distribution across speakers in audio systems. This board features three precise Butterworth filters and does not rely on a main IC component. The board offers adjustable cutoff frequencies of 120Hz, 90Hz, and 70Hz, ensuring a maximally flat frequency response with sharp roll-off...
for PIC32MZ CAPACITIVE FPI with bezel Rapid development of multimedia and GUI-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for PIC32MZ CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its...
Ambient 23 Click is a compact add-on board that measures the intensity of visible light. This board features the VEML3235SL, an advanced ambient light sensor designed by the CMOS process from Vishay Semiconductors that transforms light intensity to a 16-bit digital signal output that can be directly communicated via an I2C interface. The VEML3235SL has a...
EasyPull Click is a compact add-on board designed to easily configure mikroBUS™ signals into pull-up or pull-down states, perfect for various applications. It features a universal setup with 4.7kΩ resistors to ensure stable performance across vital communication lines such as SPI, UART, I2C, and standard mikroBUS™ signals (AN, RST, PWM, INT). The board...
Scanner Click as his name said, is an optical scanner expansion board for building optical cost-sensitive scanners and printers. The main component of this board is a 102 pixels linear optical array sensor marked TSL3301CL from AMS. For accessing sensor registers from any host controller communication is accomplished through a three-wire SPI high speed...
3D Hall 8 Click is a compact add-on board containing an ultra-small 3D-magnetic sensor for industrial and consumer applications. This board features the TLI493D-W2BW, a low-power 3D Hall sensor from Infineon. This magnetic sensor combines high-accuracy magnetic field measurements with exceptionally low power consumption (minimum 7nA). It features an I2C...
Buck 16 Click is a compact add-on board that contains a DC-DC power converter that steps down the voltage from its input to its output. This board features the TPS62912, a high-efficiency, low noise, and low ripple current-mode synchronous buck converter from Texas Instruments. The TPS62912 has an output-voltage error of less than 1%, which helps ensure...
LBAND RTK Click is a compact add-on board that provides global and easy access to satellite L-Band GNSS corrections. This board features the NEO-D9S-00B, an professional-grade satellite data receiver for L-band correction broadcast from u-blox. Operating in a frequency range from 1525MHz to 1559MHz, the NEO-D9S-00B decodes the satellite transmission and...
DIGI POT 12 Click is a compact add-on board that contains a digitally controlled potentiometer. This board features the AD5142A, a dual-channel, 256-position nonvolatile digital potentiometer from Analog Devices. On this Click board™, two digitally I2C-controlled potentiometers are realized with end-to-end resistance of 10KΩ and wiper resistance of only...
AlphaNum G 2 Click is a compact add-on board that represents an easy solution for adding numeric or hexadecimal displays to your application. This board features the LTP-3862, a dual-digit 16-segment alphanumeric green display from Lite-ON. It is a 0.3” (7.62mm) display with black face and white segments. The LED segments use common anodes, and besides...
DAC 17 Click is a compact add-on board that establishes precise voltage output control in various electronic applications. This board features the DAC7558, a 12-bit, octal-channel voltage output digital-to-analog (DAC) from Texas Instruments. It offers flexible internal or external power options with a voltage range from 2.7V to 5.5V. It features a rapid...
If you need motor contol and DSP processing then this kit with mikromedia for dsPIC33 is a solution for you.
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Surface temp Click is high accuracy digital temperature sensor Click board™, offering breakthrough performance over a wide industrial range. It is equipped with the ADT7420 - an accurate 16-Bit Digital I2C temperature sensor from Analog Devices. It features high temperature accuracy, ultralow temperature drift (0.0073°C), fast first temperature conversion...
Loading
Load more
Loading
