Mikromedia 3 for PIC32MZ Capacitive FPI with bezel
for PIC32MZ CAPACITIVE FPI with bezel
Rapid development of multimedia and GUI-centric applications
BUILD GREAT GUI IN NO TIME
Rich with peripherals
Mikromedia 3 for PIC32MZ CAPACITIVE is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much more expands its use beyond multimedia.
Mikromedia 3 for PIC32MZ CAPACITIVE FPI with bezel has two mikroBUS™ Shuttle connectors, a brand-new addition to the mikroBUS™ standard in the form of a 2x8-pin IDC header with 1.27mm (50mil) pitch. mikroBUS™ Shuttle extension board is an add-on board equipped with the conventional mikroBUS™ socket, which ensures compatibility with 1125 Click boards™.
Awesome graphics on MCU driven TFT
Mikromedia 3 for PIC32MZ CAPACITIVE is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. By featuring a 3.5" TFT display with capacitive touch screen driven by the powerful graphics controller that can display the 24-bit color palette (16.7 million colors), along with a DSP-powered embedded sound CODEC IC, Mikromedia 3 for PIC32MZ CAPACITIVE represents a perfect solution for any type of multimedia application.
Develop-on & build-in the same board
Mikromedia 3 for PIC32MZ CAPACITIVE FPI (Front Panel Integration) with bezel is designed as a complete solution. It can be implemented directly into any project, with no additional hardware modifications. At its core, there is a powerful 32-bit PIC32MZ2048EFH100 microcontroller from Microchip, which provides sufficient processing power for the most demanding tasks. The TFT display with bezel is ideal for handheld devices, or simple installation in various kinds of industrial appliances. This board requires the use of an external programmer and debugger, preferably CODEGRIP or mikroProg. The microcontroller can be programmed and debugged over the Microchip ICSP compatible 2x5 pin header, labeled as PROG/DEBUG.
WHAT'S ON BOARD - BACK SIDE
Sound, connectivity & expandibility
Resource-demanding and complex audio processing tasks can be off-loaded from the host MCU by utilizing a dedicated audio CODEC IC, labeled as VS1053B. This IC supports many different audio formats, commonly found on various digital audio devices.
This development board is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader, and much more expands its use beyond multimedia.
State of the art power supply, Display & Graphics controller
A high-quality 3.5" TFT true-color display with a capacitive touch panel is the most distinctive feature of the mikromedia 3. The display has a resolution of 320 by 240 pixels, and it can display up to 16.7M of colors. The display module is controlled by the SSD1963 graphics driver IC from Solomon Systech. This is a powerful graphics coprocessor, equipped with 1215KB of bezel buffer memory. It also includes some advanced features such as the hardware accelerated display rotation, display mirroring, hardware windowing, dynamic backlight control, programmable color and brightness control, and more.
The Power Supply Unit (PSU) provides a clean and regulated power, necessary for proper operation of the mikromedia 3 development board. It is equipped with two different power supply inputs, offering all the flexibility that mikromedia 3 needs.
The microSD card slot allows large amounts of data to be stored externally, on a microSD memory card. The microSD card detection circuit is also provided on the board.
The host MCU is equipped with a USB peripheral module, allowing simple USB connectivity.
There are two mikroBUS™ Shuttle connectors on the development board, labeled as MB1 and MB2. Typically, a mikroBUS™ Shuttle connector can be used in combination with a mikroBUS™ Shuttle extension board but is not limited to it. mikroBUS™ Shuttle extension board is an add-on board equipped with the conventional mikroBUS™ socket and four mounting holes. It can be connected to the mikroBUS™ Shuttle connector by a flat cable. This ensures compatibility with the huge base of Click boards™.
Share this product with your clients and friends.