Filter Product By
Slide and select filter/s
Filtered by
mikroLab for Tiva is a complete solution for developing with Texas Instruments’ Tiva C Series MCUs. The kit contains an EasyMx PRO v7 for Tiva C Series, a mikroC for ARM compiler license, additional accessories, and a free license for Visual TFT (valued at $99).
CAP Wheel Click is a capacitive touch sensor with round shaped electrodes integrated on a Click board™. This click can sense touch even through plastic, wood, or other dielectric materials, which can be used to protect the surface of the PCB and the sensor pad trace itself. Therefore, this Click board™ comes with overlay, made of plexiglass. Unlike the...
Barcode 2 Click is an adapter add-on board that contains a computerized image recognition system that is compliant with a wide range of different 1D and 2D barcode protocols. This board features the EM3080-W, a barcode decoder chip that delivers superior performance and solid reliability with low power consumption from Newland Auto-ID Tech. Co., Ltd....
Stepper 12 Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB67S549FTG, a two-phase bipolar stepping motor driver from Toshiba Semiconductor. It supports a PWM constant-current control drive without a current sense resistor for motor-current detection owing to the built-in function of the Advanced...
MikroElektronika Polo Shirt - Candy apple red with elegant white stripes on the collar and sleeve
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
The Thermo 17 Click is a Click board™ based on the TMP451-Q1, a high-accuracy, lowpower remote temperature sensor monitor with a built-in local temperature sensor from Texas Instruments. Because of its main features, this Click is perfect for automotive infotainment systems, ECU processor temperature monitoring, TCM processor temperature monitoring, BCM...
AD-SWIO 3 Click is a compact add-on board representing a software configurable input/output solution for various purposes. This board features the AD74115H, a single-channel, software-configurable input and output with HART mode from Analog Devices. It provides many functionality for analog input, analog output, digital input, digital output, 2-wire,...
Angle 5 Click bundle - Add a angle sensor in BLDC Motor for accurate control and high efficiency commutation of the motor and rotary position information. This bundle allows users to combine BLDC Motor a 12-bit digital contactless angle sensor with ABZ and UVW incremental outputs from Monolithic Power Systems
HAPTIC 2 Click is a compact add-on board that contains a linear vibration driver. This board features the LC898302AXA, a motor driver dedicated to LRA and ERM applications from onsemi. Controlled by only one pin, it allows crisp vibration thanks to automatic braking and over-driving feature and ignores the deviation of resonance frequency thanks to...
Lithium Battery CR2032 is a non-rechargeable (primary) coin-cell battery utilizing lithium chemistry, which is very common today and used in many applications. It offers long-lasting, reliable power for various devices providing a high voltage of 3V. It is characterized by a very low self-discharge and long shelf life (up to 10 years), alongside its...
GNSS 16 Click is a compact add-on board that delivers meter-level accuracy in urban environments. This Click board™ features the NEO-F10N-00B, a professional-grade L1/L5 dual-band GNSS receiver from u-blox. It features dual-band multipath mitigation technology to ensure robust signal reception and supports multiple GNSS systems, including GPS, Galileo,...
Motion 2 Click is a Click board™ based on EKMC1607112, PIR motion sensor from Panasonic Corporation that's used as human motion detector. Also featured on Motion 2 Click bord is TLP241A photorelay from Toshiba that is used to provide a reinforced galvanic isolation for the external signals used to drive some external high power electronic equipment when...
Stepper 25 Click is a compact add-on board designed for precise control of bipolar stepper motors. This board features the DRV8452, a high-power stepper motor driver from Texas Instruments, known for its high performance and integration. The board supports a wide supply voltage range from 4.5V to 55V and delivers up to 5A full-scale or 3.5A RMS output...
BIGPIC6 80-pin TQFP MCU Card Empty PCB
MIC24055 click is the buck regulator that can deliver continuous output current up to 8A and can step down voltages from up to 19V which makes this click board easy to use with many power sources commonly available. The amount of current it can deliver and the steady, ripple-free regulated voltage, make this click board a perfect choice for powering up...
AudioAmp 4 click is a low-power audio amplifier with a digital volume control. It is equipped with the LM4860, an audio amplifier IC capable of delivering up to 1W of continuous power to an 8 Ω load. It has a very low total harmonic distortion (THD) of less than 1% over the entire audio spectrum, which makes it perfectly suited for small boom-boxes, PC...
Stepper 8 Click is a motor control add on board based on TC78H670FTG from Toshiba, a clock-in and serial controlled Bipolar Stepping Motor Driver which can drive a 128 micro-stepping motor with a power supply ranging from 2.5V to 16V for wide range of applications includes USB-powered, battery-powered, and standard 9-12V system devices. A perfect solution...
Current Limit Click is a compact add-on board that contains a low-voltage, P-channel MOSFET power switch intended for high-side load switching applications. This board features the MAX890L, a low-resistance power switch with the adjustable, accurate current limit system, and thermal shutdown from Analog Devices. Its internal current-limiting circuitry...
This one is for all NECTO Studio users but also people who love to wear fun colors. It is this beautiful turquoise blue color with the large NECTO Studio logo on the front and the Mikroe logo on the left sleeve. We can say that these T-shirts are one of the favorites among our colleagues - you can catch a lot of us wearing them to work. FEMALE SIZES...
Compass 6 Click is a compact add-on board perfect for implementation in applications such as an electronic compass. This board features the HSCDTD008A, a high-sensitivity geomagnetic sensor from ALPS Alpine. This I2C configurable compass incorporates a magnetic sensor capable of measuring magnetic field strengths of ±2.4mT on each of its three axes and...
Barometer 8 Click is a compact add-on board used to measure air pressure in a specific environment. This board features the ILPS22QS, an ultra-compact piezoresistive absolute pressure sensor that functions as a digital output barometer from STMicroelectronics. The ILPS22QS comprises a sensing element and an IC chip for signal processing in one package,...
Microphone with PH2.0 female connector is an electret microphone, an electrostatic capacitor-based microphone, which eliminates the need for a polarizing power supply by using permanently-charged material. Housed in a compact package with diameters as small as 6mm and attached via a lead terminated with a PH2.0 female connector, this omnidirectional...
A smart display solution, mikromedia HMI 3.5" Cap has a 320x240px color display with a capacitive touch panel on the front, and a powerful FT900Q 32-bit MCU with additional essential circuitry on the back - making it a standalone but cost-effective solution suitable for industrial applications. Suggested substitutes: mikromedia HMI 4.3" Cap
Loading
Load more
Loading
