Filter Product By
Slide and select filter/s
Filtered by
Heart Rate 10 Click is a compact add-on board suitable for heart rate monitoring applications. This board features the MAX86916, an integrated optical sensor with applications in bio-sensing, proximity, and color from Analog Devices. The module includes internal LEDs, photodetectors, and low-noise electronics with ambient-light-rejection circuitry and...
ADC 18 Click is a compact add-on board that contains a high-performance data converter. This board features the MAX22005, an SPI-configurable twelve-channel 24-bit analog-to-digital converter (ADC) from Analog Devices. Input channels can be used as twelve single-ended, six differential, and up to eight multichannel configurable differential inputs. In...
IR Sense click carries the AK9750 quantum-type IR sensor. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line.
EXPAND 7 Click is a compact add-on board that contains a multi-port I/O expander with bi-directional input/outputs or PWM outputs. This board features the CY8C9540A, 40-bit I/O port expander with EEPROM and 8 independently configurable 8-bit PWM outputs from Infineon. The CY8C9540A operates as two I2C slave devices, first as a multi-port I/O expander, and...
Hall Current 5 Click is a very accurate electric current measurement Click board™ based on the ACS733 IC. This IC is a galvanically isolated current sensor, which utilizes the Hall-effect principle. Its most distinctive feature is its very low series resistance of only 1 mΩ, which makes this device a nearly-perfect ammeter. The maximum current which can...
WiFi 9 Click is fully embedded stand-alone Wi-Fi module, equipped with the PAN9420 a 2.4 GHz ISM band Wi-Fi-embedded module which includes a wireless radio and an MCU for easy integration of Wi-Fi connectivity into various electronic devices. This module combines a high-performance CPU with Wireless radio and integrated memory, which offers many features...
DIGI POT 7 Click is a compact add-on board used as a digitally controlled potentiometer. This board features the AD5175, a single-channel 1024-position digital rheostat with less than ±1% end-to-end resistor tolerance error and 50-time programmable wiper memory from Analog Devices. This I2C configurable IC is designed to operate as a variable resistor for...
MIC24045 click carries MIC24045 I2C-programmable, high-efficiency, wide input range, 2A synchronous step-down regulator from Microchip. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface with additional functionality provided by the following pins on the mikroBUS™ line: RST,...
M-BUS RF 4 Click is a mikroBUS™ add-on board with a MIPOT 32001324 RF wireless transceiver. This module operates in the 868 MHz SRD Band. Thanks to its small LCC form factor (15 x 25 mm only) and its low power consumption this module allows the implementation of highly integrated low power (battery operated) solutions for water, gas, heat or electricity...
UV 2 Click is a compact add-on board that measures ultraviolet light. This board features the VEML6075, a UVA and UVB light sensor with an I2C interface from Vishay. It incorporates a photodiode, amplifiers, and analog/digital circuits into a single device using CMOS technology and converts solar UV light intensity to digital data in 16-bit resolution....
4Dot-Matrix R click is a display device Click board™, which contains a four-digit dot matrix display module, labeled as SLO2016. This module has a 5x7 dot matrix, with very closely spaced, bright red pixel elements. This makes the characters very clearly displayed. Pixels emit a bright red color when lit, which makes the display readable in any condition...
RA4M1 Clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. This board features all you need to get started: 32-bit R7FA4M1AB3CFM microcontroller, J-Link OB, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.
6LoPWAN T Click is a compact add-on board that adds an IPv6 over low-power wireless personal area networks to your application. This board features the CC2520, a 2.4GHz IEEE802.15.4/Zigbee RF transceiver from Texas Instruments. Over a PCB printed trace antenna, with 2394 up to 2507MHz frequency range and appropriate balun, this transceiver can achieve a...
Balancer 5 Click is an intelligent 2-cell Li-Ion battery charger, system power manager, and a battery fuel gauge Click board™. Balancer 5 click is based on BQ25887 controller which has some extra features enabling charging without too much hassle. As a system power distributor, it can supply up to 3.3A to a connected battery. By utilizing an externally...
Nano GPS 2 Click features the smallest GPS module with an integrated patch antenna, the ORG1510-MK05 a module from OriginGPS. It’s the world’s smallest multi-constellation antenna module enabling high-performance in a variety of applications. Multi Micro Hornet ORG1510-MK05 module is introducing the industry’s lowest energy per fix ratio, unparalleled...
IPS Display 2 Click is a compact add-on board that displays high-resolution graphics in embedded applications. This board features the ER-TFT1.54-2, a 1.54" TFT LCD display from EastRising Technology, and uses the ST7789V2 controller for 262K color output. The display offers a 240x240 pixel resolution, operates through a 3-wire SPI interface, and includes...
Optical sensor/encoder click Opto Encoder click is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. Encoders of this type are widely used for many applications which involve precise detection of the position, speed, or rotational angle of an object. Rotary encoders are often used for various...
DC Motor 4 Click is a compact add-on board with a brushed DC motor driver. This board features the MAX14870, a compact full-bridge DC motor driver from Analog Devices. It can be used for driving and controlling brushed DC motors and relays with voltages between 4.5 and 36V. The driver can supply up to 2.5A of current as a motor peak and ensures a large...
I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply. The click communicates with the target microcontroller over an I2C interface with additional functionality provided by the...
A5000 Plug&Trust Click is a compact add-on board representing a ready-to-use secure IoT authenticator. This board features the EdgeLock® A5000, a Secure Authenticator from NXP Semiconductors. The A5000 provides a root of trust at the IC level, giving an IoT authentication system state-of-the-art security capability. It allows for securely storing and...
Tact Switch 4.5x4.5mm SMD (10pcs)
ADC 7 Click is an advanced 32-bit analog to digital converter (ADC) which uses the LTC2500CDKD-32, a 32-bit oversampling SAR ADC with a configurable digital filter. The filter provides several presets (selectable via the hardware pin), as well as programming of the filtering parameters, via the industry-standard SPI interface. The LTC2500CDKD-32 has some...
BT Audio 3 Click is a compact add-on board with high-performing voice and audio post-processing capability for Bluetooth audio applications. This board features the BM83, a fully certified Bluetooth v5.0 stereo audio module from Microchip. The BM83 contains an onboard Bluetooth stack and audio profiles and supports 24-bit/96 kHz high-resolution audio...
Expand 13 Click is a compact add-on board that contains a multi-port I/O expander. This board features the PI4IOE5V96248, a 48-bit general-purpose I/O expander providing remote I/O expansion for most MCU’s families from Diodes Incorporated. The PI4IOE5V96248 comes in a 6-channel configuration and allows easy addition of I/O through a standard I2C serial...
Loading
Load more
Loading
