Filter Product By
Slide and select filter/s
Filtered by
Speaker with PH2.0 female connector is an 8Ω 2W portable all-in-one loudspeaker passive cavity speaker. Housed in a compact package with a wire-lead PH2.0 female connector and dimensions of 40×20×5.8mm (LxWxH), this cavity speaker provides stable performance and clear sound of a quality ideally suited for various audio-producing applications in consumer,...
RA4M1 Clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. This board features all you need to get started: 32-bit R7FA4M1AB3CFM microcontroller, J-Link OB, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.
DIGI POT 2 Click is a compact add-on board that contains a digitally controlled potentiometer with a resistance of 100KΩ. This board features the TPL0501, a 256-taps single-channel digital potentiometer with an SPI interface from Texas Instruments. It is designed to operate as a variable resistor for analog signals with the voltage range of single-supply...
Smart environmental temperature and humidity sensor Temp&Hum 4 click is a smart environmental temperature and humidity sensor Click board™, packed with features which allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements. The sensor IC itself has integrated sensing elements placed...
Radiation Sensor Tester is a coin-shaped tool for quickly testing the functionality of nuclear radiation sensors. The PB40 tester contains a small amount of pitchblende (uraninite), embedded in a plastic disk which is suitable for physics classroom experiments without any risk of damage to health. The Radiation Sensor Tester is used with the Radiation...
DRAM Click is a compact add-on board representing a dynamic random-access memory solution. This board contains the APS6404L-3SKR from AP Memory, a high-performance 64Mb SPI/KPI PSRAM memory organized as 8M x 8 bits each. This Pseudo-SRAM device features a high speed, low pin count interface and incorporates a seamless self-managed refresh mechanism to...
70 blue LEDs for displaying symbols and characters 7x10 B click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are...
MikroBoard for ARM 144-pin is primarily intended to be connected to the EasyARM v6 development system but can also be used as a stand-alone device.
mikroBasic PRO for dsPIC Buy now Download
NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2). Its impedance changes as a result of a catalytic reaction, allowing it to be used in a voltage divider configuration. This voltage can be sampled by an accurate A/D...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Development kit for RGB LED matrix that includes: Matrix RGB click, 32x32 RGB LED Matrix Panel - 6mm pitch, 5V-3A power supply with EU plug (can power up up to two panels), accessories.
This WiFi Rubber Antenna is an excellent choice for any Click board™ that features a WiFi module. The antenna has an right angle SMA male connector on its end, which allows it to be mounted directly on the Click board™ or the female SMA module connector.
Buggy is a robot rover platform expandable with all sorts of sensors and transceivers. A dream car for hackers and makers. Multiple kits available.
DC Motor 8 click is a DC motor driver. It can drive simple DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control input, that uses the PWM signal from the host MCU. It uses the half-bridge topology to regulate the speed of the motor rotation, employs advanced dead-time circuitry that...
UNI HALL Click is a compact add-on board representing a simple solution for adding a unipolar Hall switch to your design. This board features the US5881, a unipolar Hall-effect switch designed in mixed signal CMOS technology from Melexis Technologies. It is sensitive only to the North pole magnetic field, outputting a LOW logic level when exposed....
Cap Touch 2 click is a capacitive touch sensing Click board™ which features the CAP1166, an advanced touch/proximity sensor IC, packed with a range of different touch/proximity functionalities, allowing development of robust and aesthetically pleasing touch interfaces. Besides six touch sensitive channels, the sensor IC has six independent LED drivers,...
Silabs Click Shield An ideal platform for developing energy-friendly connected IoT solutions Start your IoT solution development with our Silabs Click Shield fast and easy. The Thunderboard™ and Starter Kit platforms, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to...
PSoC® TFT Expansion Board is a breakout board for a 2.8”, 320x240 px MI0283QT-9A TFT display. It's equipped with a microSD slot, and compatible with the CY8CKIT-050 PSoC® 5LP development kit.
EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microcontrollers. It features USB Type-C CODEGRIP programmer/debugger. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. MIKROE-4459
Rectangular NFC 40x30 Antenna is PCB antenna designed with the intention to be used as extension of development boards and placed remotely on desired place such as plastic casing, existing products, or even under displays. Antenna is designed in circular shape with diameter of 40mm. Its important to mention that this antenna can be used for NFC and RFID...
Try the WunderBar and watch how yesterday's limits of App development for iOS and Android devices start melting away like a piece of chocolate on your tongue, releasing an abundance of new possibilities that will amaze and excite you. Kit contains WunderBar board, Casing, USB cable, Li-Ion battery, Li-Ion coin cell batteries, Tacky tapes, User manual
The EasyLV-18F v6 development system supports 40-, 28- and 20-pin PIC18J and PIC18K microcontroller families from Microchip. It comes with a PIC18F45K20. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Serial RAM, EEPROM, COG Display, etc.
White Earphones, standard small stereo earphones, with high quality stereo cable and connector. They come in standard size and comfortably fit into ear. They are compatible with all of mikroElektronika mikromedia and multimedia boards.
Loading
Load more
Loading
