Filter Product By
Slide and select filter/s
Filtered by
4-20mA T 2 Click is a compact add-on board for transmitting an analog output current over an industry-standard 4-20mA current loop. This board features DAC161S997, a low-power 16-bit ΣΔ digital-to-analog converter (DAC) from Texas Instruments. It has a programmable Power-Up condition and loop-error detection/reporting accessible via simple 4-wire SPI for...
ECG 6 Click is a complete solution for the development of ECG and Heart-Rate (HR) applications. It features the MAX86150, a Reflective Heart Rate Monitor and Medical-Grade Pulse Oximeter from Analog Devices. The Click board™ contain integrated electrocardiogram, pulse oximeter, heart rate monitor sensor module. The ECG 6 Click can be used for application...
USB UART 5 Click is a compact add-on board with a general-purpose USB to UART serial interface. This board features the CP2110, a highly-integrated USB-to-UART bridge controller from Silicon Labs. The CP2110 uses the standard USB HID device class, requiring no custom driver and a UART interface that implements all RS-232 signals, including control and...
RJ12/RJ45 ICD3/ICD4 The adapter comes with RJ12 six conductor modular telephone cable
Environment 4 Click is a compact add-on board combining 4th-generation SHT humidity and SGP air-quality sensing solutions from Sensirion. This board features the SHT41A-AD1B I2C-configurable high-accuracy relative humidity/temperature and the SGP41, an MOx-based gas sensor. The SHT41A-AD1B offers a linear digital output alongside temperature/humidity...
Vibra Sense 2 Click is a compact add-on board that contains a piezo sensor suitable for vibration measurements. This board features the LDT0-028K, a flexible 28 μm thick piezoelectric PVDF polymer film with screen-printed silver ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts from TE Connectivity. The...
Arduino MKR Click Shield Combine Arduino MKR family with your favorite Click boards™ Start your project development with our Arduino MKR Click Shield fast and easy. The Arduino MKR board, in combination with the mikroBUS™ socket, provides you immediate access to hundreds of Click boards™ in our offer, allowing you to create a limitless number of...
The IrDA2 board features the MCP2120 infrared encoder/decoder placed between the UART and infrared (IR) optical transceiver.
Ribbon Cable 10-wire, Male/Male, 20 cm
MiWi click is a subgigahertz radio transceiver click board™, which offers a reliable FSK or OOK communication solution, with the maximum data rates of 40kbps and 16kbps, respectively. The radio transceiver module used on this click board™ has plenty of features that make it a perfect choice for compact designs: It has very good reception sensitivity, an...
LR 4 Click is a compact add-on board that contains a long-range transceiver. This board features the 32001353, RF technology-based SRD transceiver, which operates at a frequency of 868MHz from Mipot. Thanks to the spread spectrum modulation feature, as well as the low power consumption, it is capable of achieving long-range communication, immune to...
Create your prototype devices with AVR microcontrollers immediately. Get Easy Start Kit - AVR with mikroC, mikroBasic or mikroPascal at affordable price.
Thermo 20 Click is a compact add-on board that provides an accurate temperature measurement. This board features the TSYS03, a miniature digital temperature sensor that comes up with factory calibrated, highly accurate temperature data from TE Connectivity. This temperature sensor characterized by its accuracy and high resolution offers digital output...
The SerialRAM Board enables you to use a 64 Kbit Serial SRAM device with your development board. The board features the 23K640 Serial RAM device that communicates with microcontrollers via a Serial Peripheral Interface (SPI).
Smoke Click is a compact add-on board that can detect the presence of smoke. This board features the MAX30105, a high-sensitivity optical sensor for smoke detection applications from Analog Devices. It provides a complete system solution to ease the design-in process of smoke detection applications, including fire alarms. The sensor can detect a wide...
LPS22HB click is an easy solution for adding a digital barometer to your design. It carries the LPS22HB MEMS nano pressure sensor. The click is designed to run on a 3.3V power supply. LPS22HB click communicates with the target microcontroller over I2C or SPI interface.
Ribbon Cable 26-wire, Female IDC/Male, 20 cm
TouchKey 2 Click is a compact add-on board with four capacitive pads explicitly designed for touchpad controls. This board features the ATtiny817, an 8-bit AVR microcontroller from Microchip. The ATtiny MCU has an integrated touch QTouch® controller, which supports a capacitive touch interface with proximity sensing. This Peripheral Touch Controller (PTC)...
BUCK click is a buck switching regulator that accepts a wide input voltage range of up to 40V and steps it down to 3.3V or 5V. The click carries the LT3976 40V, 5A, 2MHz step-down switching regulator with 3.3µA quiescent current. BUCK click communicates with the target microcontroller over the following pins on the mikroBUS™ line: PWM, INT, RS, CS.
Accel 12 Click is a compact add-on board for building smart, motion-aware applications. It is based on the MC3216, a low-noise, low-power accelerometer from MEMSIC. It supports linear acceleration and gravity force measurements across ±2g, ±4g, ±8g, and ±16g ranges on X, Y, and Z axes. The sensor features a 14-bit ADC for precise digital output via I2C...
VREG Click is a compact add-on board with circuitry for digitally controlled DC voltage regulation. This board features the LM317M, an adjustable voltage regulator from STMicroelectronics. The VREG Click can regulate external power supplies over the screw terminals, but also the internal from the host board itself, in this case, 3.3 or 5V. The circuit...
OLED Switch Click is a compact add-on board that combines a button and a full-color organic LED display. This board features the ISC15ANP4, a programmable smart display from NKK Switches. It comes with an OLED display that acts as a push button in a single durable case, with dust-tight construction and long life of three million actuation minimum. The...
RA4M1 Clicker is an amazingly compact starter development kit which brings innovative mikroBUS™ host socket to your favorite microcontroller. This board features all you need to get started: 32-bit R7FA4M1AB3CFM microcontroller, J-Link OB, USB connector, two LEDs and push buttons, reset button and headers for interfacing with external electronics.
Loading
Load more
Loading
