Filter Product By
Slide and select filter/s
Filtered by
OBDII click offers a unique opportunity to tap into the car diagnostic systems. It features the STN1110 Multiprotocol OBD to UART Interface, developed by the ScanTool technologies. This click can be used for the communication with the Electronic Control Unit (ECU) of a vehicle, via several different OBD II diagnostic protocols such as CAN, K LINE, L LINE...
WiFi 10 Click is a Click board™ that offers an ultra-low power wireless connectivity, for any IoT application. It is based on the SX-ULPAN-SB-2401, an integrated wireless LAN module, compliant with the IEEE802.11a/b/g/n wireless networking protocols, at 2.4GHz. The ULPAN-SB-2401 module comes equipped with a PCB trace antenna, but it also offers a small...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
ATA663211 Click is a compact add-on board with a physical interface to automotive and industrial LIN systems. This board features the ATA663211, a fully integrated LIN transceiver from Microchip, which complies with the LIN specifications 2.0, 2.1, 2.2, 2.2A, and SAEJ2602-2. The LIN transceiver interfaces both the LIN protocol handler and the physical...
PIC18F8722 microcontroller. Featuring nanoWatt technology, it has up to 10 MIPS operation, 128K bytes of linear program memory, 3936 bytes of linear data memory, and lot of internal modules.
This is a USB 2.0 Type B to Type A plug 5-pin cable with reddish plastic insulation.
Air quality 5 Click is a triple MOS sensor on a single Click board™, which can detect gas pollution for a number of different gases. The onboard sensor is specially designed to detect the pollution from automobile exhausts, as well as the gas pollution from the industrial or agricultural industry. This Click board™ uses the MiCS-6814, a compact MOS sensor...
Click Analyzer is a smart and powerful tool for analyzing pin states and voltage levels on the mikroBUS™. It is a versatile and powerful smart analyzing tool, which consists of two 8-bit PIC microcontrollers (MCUs), from Microchip. By utilizing some of the capabilities of the PIC18F26K42 MCU, such as the DMA, CLC, SMT, and NCO to name few, it is possible...
Flash 3 Click is a compact add-on board representing a highly reliable memory solution. This board features the IS25LP128, a serial Flash memory with 133MHz multi I/O SPI & quad I/O QPI DTR interfaces from Integrated Silicon Solution. This 128Mbit (16MB) Flash memory chip is a high-performance device that operates at 50MHz at Normal and 133MHz at Fast...
EEPROM2 click provides 2 Mbit (2,097,152 bits) of Electrically Erasable and Programmable Read Only Memory, organized in bytes. In other words, this Click board™ is an EEPROM memory medium with the capacity of 256 KB. The used EEPROM module has an impressive endurance of 4,000,000 write cycles and data retention period of over 200 years. EEPROM module on...
Pressure 3 Click is a compact add-on board that contains a board-mount pressure sensor. This board features the DPS310, a digital XENSIV™ barometric pressure sensor for portable devices from Infineon. It is a fast sensor with a typical measurement time of 27.6ms for Standard mode, down to 3.6ms in Low precision mode. The DPS310 has an operating range from...
LED Ring R Click is a compact add-on board with a ring of 32 red LEDs. This board features four SN74HC595, an 8-bit serial-in, parallel-out 3-state shift register output latches from Texas Instruments. The 32 LEDs are arranged in a 25mm circle, forming a ring of LEDs. The SN74HC595 shift registers allow addressing each LED individually or all of them at...
Matrix RGB Click is a compact add-on board explicitly designed to power 16x32 RGB LED matrices. This board features the FT900, a complete System-on-Chip 32-bit RISC microcontroller from FTDI Chip. This Click board™ can drive a single pixel with a color, a text displayed at any screen point, or an RGB565 formatted bitmap. The standard 16x32 RGB LED...
The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc.
BIGAVR6 MCU Card with ATMEGA128
Lightranger 2 Click is a compact add-on board with a ranging sensor for distance-sensing applications. This board features the VL53L0X, the world’s smallest Time-of-Flight (ToF) ranging and gesture detection sensor from STMicroelectronics. This laser-ranging module provides accurate distance measurement, with absolute measurement distances up to 2m,...
LPG Click is a compact add-on board that detects liquefied petroleum gas leakage. This board features the MQ-5, a flammable propane gas sensor from Zhengzhou Winsen Electronics Technology. The gas sensing layer on the MQ-5 sensor unit is made of Tin dioxide (SnO2), an inorganic compound with lower conductivity in clean air (the conductivity increases as...
Flash 4 click is a perfect solution for the mass storage option in various embedded applications. With fast performance being one of its key features, Flash 4 click can also be used for the code shadowing, execute-in-place (XIP), and data storage. It features the S25FL512S Flash memory module made by combined high-performance MirrorBit® technology and...
The BT-EZ click is a Click board™ which provide BLE connectivity for any embedded application. BT-EZ click based on the CYBT-343026-01 module, from Infineon. This Click board™ is a fully integrated bluetooth low energy module, mentioned for easy integration into various electronic devices. Given its features, this click can be used for health, sports, and...
AC Current click is a device that is able to measure the alternating current (AC) running through the conductor, using the so-called non-invasive current sensor. The non-invasive sensor works by utilizing the electromagnetic induction phenomenon, similar to a transformer. The primary coil does not exist though, the electromagnetic field is generated by...
The EasyBuzz Board enables your development system to emit audio signals. It contains a piezo speaker capable of playing sound frequencies in the range between 20Hz and 20kHz. There is also an on-board DIP switch used to connfigure board connections.
6DOF IMU 14 Click is a compact add-on board that contains a 6-axis MEMS motion tracking device combining a 3-axis gyroscope and a 3-axis accelerometer. This board features the ICM-42688-P, high precision 6-axis MEMS motion tracking device, from TDK InvenSense. It has a configurable host interface that supports both I2C and SPI serial communication,...
Nano LR Click is a compact add-on board that contains a long-range transceiver. This board features the EMB-LR1276S, RF technology-based SRD transceiver, which operates at a frequency of 868MHz from Embit. Thanks to the spread spectrum modulation feature, as well as the low power consumption, it is capable of achieving long-range communication, immune to...
Loading
Load more
Loading
