The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc.
OFF
MIKROE-456
1150 g
Status:
The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc.
This product is no longer in stock
Availability date:
The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc.
On-board USB 2.0 programmer. AVRprog2 doesn't use bootloader or any similar software for programming. The whole AVR memory and all pins are available to you. This is a fast USB AVR InSystem programmer ideal for your future projects. Our latest AVRprog2 Programmer is driven and powered by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). The External Programmer and JTAG can be connected and used with the BIGAVR6 development system.
MMC/SD card slot enables you to use MMC/SD memory cards easily. With Serial EEPROM 24AA01 you can store up to 1Kbit of data. Temperature Sensor DS1820 measures temperature from -55°C to 125°C. It is connected to the system via 3-pin socket. Board also features Real-Time Clock (RTC) DS1307 with a battery supply.
Graphic LCD 128x64 and LCD 2x16 can be easily connected via the on-board connectors. Board also features a Touch Screen controller.
RS-232 communication is enabled via two DB9 connectors and MAX232 level converters. USB connector and CAN transceiver MCP2551 are provided on-board as well.
86 push buttons and 86 LEDs are connected to all microcontrollers pins. DIP switch is used to separate port pins from pull-up/pull-down resistors.
Applications | Developing and testing firmware, creating prototypes, learning embedded programming |
MCU | ATMEGA128 |
On-board modules | Socket for DS1820 temperature sensor, A/D Potentiometer, 86 LEDs and push buttons, Real-Time Clock (RTC DS1307), |
Storage | 1KB Serial EEPROM (24AA01), MMC/SD card slot |
Programming | On-board USB 2.0 programmer for AVR. JTAG port supports in-circuit debugging and firmware programming. |
Expandability | 1 x IDC10 header for each PORT |
Integration | Mounting holes |
Category | Development Systems |