Filter Product By
Slide and select filter/s
Filtered by
On-board programmer with ICD support with miniUSB programmer connector. Board carries PIC18F4520 MCU from Microchip, it's regulated with 5V power regulator circuit.
Grid-EYE Click is a compact add-on board with an 8x8 thermal array detector. This board features the AMG8853, an infrared array sensor from Panasonic Semi. The temperature detection is achieved on a two-dimensional area of 8x8 (64 pixels) as a digital output, where the temperature values can be an output, too. A total number of 64 individual sensors can...
This add-on board features the PCM5122 DAC with excellent dynamic performance for audiophile-worthy reproduction of your favorite music, on a budget.
LightHz Click is a compact add-on board that effectively measures ambient light intensity. This board features the TL2L30BR, a programmable light-to-frequency converter from ams. The sensor outputs either a pulse train or a square wave (50% duty cycle) with a frequency directly proportional to light intensity (irradiance). It has programmable sensitivity...
Go to Cloud (G2C) click is a gateway Click board™ which provides a simple and reliable connection to the Click Cloud platform, a cloud-based rapid prototyping environment, hosted by MikroElektronika. Go to Cloud (G2C) click offers an unprecedented simplicity for adding Click Cloud connectivity to any embedded application, by utilizing the simple UART...
RS485 Isolator 2 Click features ADM2867E a 5.7 kV rms signal and power isolated full duplex RS-485 transceiver. The device also features cable invert pins, allowing the user to quickly correct reversed cable connection on A, B, Y, and Z bus pins while maintaining receiver full receiver fail-safe performance. This full duplex device allows for independent...
Temp&Hum 13 Click is a Click board™ which is perfectly suited for measuring the relative humidity (RH) and temperature. The Click board™ is equipped with the HTU21DF, an accurate and reliable sensor IC, packed in a miniature 3x3mm DFN package from TE Connectivity. This sensor is fully calibrated and features fast response time, low power consumption,...
EasyWiFi Board is a all-in-one wireless 2.4GHz 802.11b solution with high-speed voltage translators, making it suitable for most microcontroller architectures. It carries MRF24WB0MA Wi-Fi radio transceiver module with integrated PCB antenna, matching circuitry. Available for purchase until stocks last. Contact our sales to check the stock and delivery time
USB UART 3 click is a versatile and feature-rich USB to UART interface from Silicon Labs. It uses CP2102N which is a part of their USBXpress™ family. These devices are designed to quickly add a USB 2.0 full-speed compliant UART interface for custom applications, by eliminating firmware complexity and reducing development time. The Click board™ requires...
Peltier Element TEC1-12706 is thermoelectric cooling element that uses the Peltier effect to create a heat flux at the junction of two different types of materials. This version is supporting 12V and current rating of 6A. Peltier Element can be used with our Peltier click board. NOTE: The Peltier element must be used with a heatsink on the hot side....
Clicker 2 for dsPIC33 The possibilities are endless Clicker 2 is a battery-powered Click board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!
USB Mini-B Plug to Type-A Female adapter
Flat Cable with IDC10 1.27mm pitch connectors
Secure UDFN Click is universal, socket based click board, specifically designed for the Microchip CryptoAuthentication™ devices in an 8-pin UDFN package. This click board™ supports the I2C, SPI, and the SWI interface based ICs from the CryptoAuthentication™ family with a flexible command set, that allows use in various security applications, including...
Fan 2 click carries the MAX31760 precision fan-speed controller. It can measure temperature and adjust the fan speed to keep the temperature at the same level. Fan 2 click can also control two fans at the same time. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, with...
Color 10 Click is carrying VEML3328 sensor for RGB and IR light sensing as well as the RGB diode incorporated on the board which makes it good color detection device when its combined with a white LED. The VEML3328 sensor senses red, green, blue, clear and IR light by incorporating photodiodes, amplifiers, and analog / digital circuits into a single CMOS...
Smart programmable touch display, packed with features. Mikromedia can be used as a powerful programmable dashboard control panel for both hobby projects, but also for the entire systems. Based on the powerful PIC32MX795F512L MCU, it represents a powerful tool for building GUI-centric HID applications.
The microSD Card Board enables you to develop mass storage and data acquisition devices. Practical and ready-to-use examples allow you a quick start in using this board.
GNSS RTK Click is a compact add-on board used to enhance the precision of position data derived from satellite-based positioning systems. This board features the ZED-F9P, a multi-band GNSS module with integrated multi-band Real Time Kinematics (RTK) technology offering centimeter-level accuracy from U-blox. This module concurrently uses GNSS signals from...
WiFi 4 Click is a compact add-on board that provides a low-power WiFi solution. This board features SPWF01SA, a serial-to-WiFi b/g/n intelligent module from STMicroelectronics. This fully integrated module uses the IEEE802.11b/g/n standard in the 2.4GHz ISM frequency band that can work in Station, IBSS, and miniAP (up to 5 stations) modes. In addition,...
10DOF Click is a compact add-on board for enhancing hardware prototypes with 10DOF functionality (10 degrees of freedom). This board features the BNO055, an intelligent 9-axis absolute orientation sensor from Bosch Sensortec. In addition, it also features the BMP180, a digital pressure sensor from Bosch Sensortec. These two sensors bring you three axes...
Compact Flash Board development board supports CompactFlash® Cards - small, removable mass storage devices. It provides a complete PCMCIA-ATA functionality and compatibility.
Accel&Pressure Click is a compact add-on board representing a rate-of-climb sensing solution for your application. This board features the FXLS8974CF, a 3-axis low-g accelerometer, and the MPL3115A2, a precision pressure sensor with altimetry, both from NXP Semiconductor. Those two sensors are high-performance, low-power devices covering all of...
This right angle 433Mhz rubber antenna with vertical polarisation extends the range of devices LoRa and OOK RX Click boards™.
Loading
Load more
Loading
