Filter Product By
Slide and select filter/s
Filtered by
7seg Click is a compact add-on board representing an easy solution for adding numeric or hexadecimal displays to your application. This board features a double pack of the SN74HC595D, an 8-bit serial-in, parallel-out shift register modules from Texas Instruments, as well as two seven-segment red displays, the JS1-5213AE from Ningbo Junsheng Electronics....
EEPROM Click is a compact add-on board representing a nonvolatile memory solution. This board features the FT24C08A, 8192 bits of electrically erasable programmable memory with enhanced hardware write protection for the entire memory from Fremont Micro Devices. Internally organized as 1024 words of 8 bits (1 byte) each, the FT24C08A is fabricated with a...
Flash Click is a compact add-on board representing a highly reliable memory solution. This board features the EN25Q80B, a serial flash memory from EON Electric. The capacity of this flash memory is 8 Megabit (1MB) with 256 uniform sectors, 4KB each, and features advanced write protection mechanisms. The used flash IC has excellent endurance and can...
THERMO Click is a compact add-on board that provides accurate temperature measurements. This board features the MAX31855K, a thermocouple-to-digital converter from Analog Devices, as well as a PCC-SMP connector for K-type thermocouple probe. Combination of MAX31855K and PCC-SMP connector results in high-accuracy temperature measurement in a temperature...
Opto Click is a compact add-on board that provides uncomplicated safety isolation from high voltage. This board features a double pack of the DIP socket VO2630, dual-channel, high-speed optocoupler modules from Vishay Semiconductors. The VO2630 enables a high speed of 10Mbit/s data transfer between its input and output with galvanic isolation utilizing a...
IrDA 2 Click is a compact add-on board providing a cost-effective solution for sending and receiving IR serial data. This board features the MCP2120, a Microchip’s high-performance fully-static infrared encoder/decoder for the infrared transceiver module, the TFDU4101 from Vishay semiconductor. The MCP2120 encodes an asynchronous serial data stream,...
Accel Click is a compact add-on board that contains an acceleration sensor. This board features the ADXL345, an ultra-low power, 3-axis accelerometer with high resolution (13-bit) measurements from Analog Devices. It allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, or ±16g in three axes with a configurable host interface...
WiFi Plus Click is a compact add-on board providing a low-power WiFi solution. This board features the MRF24WB0MA, a 2.4GHz, IEEE standard 802.11b/g/n compliant RF transceiver from Microchip. The MRF24WB0MA comes with an integrated antenna, with a range of up to 400m, and a place for a u.Fl connector. It is characterized by low power consumption and...
This is a USB 2.0 type A to Mini-B 5-pin cable with roll-patent mechanism.
8x8 B click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns. It has a digital brightness control in 16 steps, it can control every LED in the display matrix independently, it blanks the display on power up to eliminate glitches and it requires a single resistor to control the current through all the LEDs at...
CAN SPI Click 5V is a compact add-on board that provides a complete CAN solution and can be used as a control node in a CAN network. This board features the MCP2515, a stand-alone CAN controller with an SPI interface from Microchip. This Click board™ also uses the SN65HVD230, a CAN Bus transceiver from Texas Instruments, as an interface between an MCP2515...
BEE Click is a compact add-on board that contains a fully integrated ZigBee transceiver. This board features the MRF24J40MA, a 2.4GHz RF transceiver module from Microchip. It is an IEEE802.15.4 standard-compliant RF receiver and supports ZigBee, MiWi, MiWi P2P, and proprietary wireless networking protocols. The module has low current consumption and can...
Loading
Load more
Loading
