Filter Product By
Slide and select filter/s
Filtered by
for STM32F4 CAPACITIVE FPI with bezel Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F4 CAPACITIVE FPI with bezel is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
HMI CAPACITIVE Rapid development of multimedia and GUI-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals The board integrates a microSD card for expanding storage capacity, a haptic feedback motor, small audio speaker, and a USB-C connector, expanding its use beyond the multimedia. Two standardized mikroBUS™ Shuttle...
Ambient 20 Click is a compact add-on board used to measure the amount of ambient light present. This board features the BU27030NUC, a 16-bit digital-output ambient light sensor with an I2C interface from Rohm Semiconductor. The BU27030NUC has a flexible and wide operating range of up to 20klx with a maximum resolution of 0.0007lux/count, providing an...
Magneto 13 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA736, a contactless digital angle sensor from Monolithic Power Systems. It is a MagAlpha sensor that detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder or a rotating shaft. The MA736...
ADC 14 Click is a compact add-on board with a high-performance data converter. This board features the MAX11108A, a low-power serial ADC from Analog Devices. It includes a high-dynamic range sample-and-hold and a high-speed serial interface. This 12-bit resolution ADC with an integrated single-ended analog input connected to the ADC core can achieve up to...
EZO Carrier Click - pH is a compact add-on board that allows you to measure the potential of hydrogen (the power of hydrogen) in your application. This board features the EZO™ pH, a pH measurement interface circuit board from Atlas Scientific. The EZO™ pH is a small additional board that comes with the carrier board and allows you to read the pH values of...
Micro Pump Click is a compact add-on board designed for precise air and fluid movement in embedded applications. This board features the JSB1523018, a mini pump from TCSTec, controlled by the DRV8213 brushed DC motor driver from Texas Instruments. The board delivers a high flow rate of 80~130mL/min and operates at a pressure of 80kPa, while maintaining...
for STM32F4 CAPACITIVE FPI with frame Rapid development of multimedia and gui-centric applications BUILD GREAT GUI IN NO TIME Rich with peripherals Mikromedia 3 for STM32F4 CAPACITIVE FPI with frame is not limited to multimedia-based applications only. USB, digital motion sensor, battery charging functionality, SD card reader and much...
Gyro 8 Click is a compact add-on board that contains a high-performance gyroscope. This board features Murata's SCR2100-D08, a high-performance single-axis angular rate sensor (gyroscope). Based on Murata's proven capacitive 3D-MEMS technology, the SCR2100-D08 is characterized by high stability and reliability, providing immensely stable output over a...
Charger 26 Click is a compact add-on board that provides a single-cell charging solution. This board features the MAX1811, a USB-powered Li+ charger from Analog Devices. The charger uses an internal FET to deliver the battery up to 500mA charging current. It has pre-conditioning that soft-starts a near-dead battery cell before charging. The other safety...
Current Limit 10 Click is a compact add-on board representing a current-limiting solution for your application. This board features the HS2950P, a load protection HotSwitch from Semtech. It features a wide input voltage range of 2.7V up to 29V and can provide up to 5A output current. The HS2950P features an adjustable current limit, over-voltage...
Resistive Rapid development of multimedia and gui-centric applications
LR 11 Click - 915MHz is a compact add-on board for long-range, low-power wireless communication in IoT applications. This board features the 453-00139R, an ultra-low power LoraWAN module Ezurio (part of the RM126x series), integrating the Silicon Labs EFR32 SoC and the Semtech SX1262 radio. It supports LoRaWAN classes A, B, and C, offering secure,...
4G LTE 2 Click - Data (for North America) is a compact add-on board providing a secure-cloud multi-band solution offering universal connectivity and reliable performance. This board features the LARA-R6401D, the world’s smallest LTE Cat 1 module from u-blox with coverage for North American region and a built-in MQTT client, representing a data-only...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
TFT Color Display with Touch Screen (4.3") is a color active matrix thin film transistor(TFT) liquid crystal display (LCD).
H-Bridge 9 Click is a compact add-on board that contains six MOSFET half-bridge outputs. This board features the L99UDL01, a six-channel half-bridge driver monolithic integrated circuit that is PWM configurable and current regulated from STMicroelectronics. It achieves excellent load and line regulation over a wide input supply range up to 18V. These six...
Accel 19 Click is a compact add-on board that contains an acceleration sensor. This board features the LIS2DTW12, an ultra-low-power high-performance three-axis accelerometer from STMicroelectronics. It allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, or ±16g in three axes with a configurable host interface that supports...
Multi Stepper Click is a compact add-on board that contains a bipolar stepper motor driver. This board features the TB67S209FTG, CLOCK-in controlled bipolar stepping motor driver from Toshiba Semiconductor. It supports a PWM constant-current control drive, selectable mixed decay mode, and allows from full-step up to 1/32 steps resolution for less motor...
Clock Gen 6 Click is a compact add-on board representing a digital oscillator solution. This board features the MIC1557, an IttyBitty CMOS RC oscillator designed to provide rail-to-rail pulses for precise time delay or frequency generation from Microchip Technology. The MIC1557 has a single threshold and trigger connection, internally connected, for...
Air Motion Click is a compact add-on board that contains a 6-axis inertial measurement unit. This board features TDK InvenSense’s ICM-40627, a 6-axis MEMS MotionTracking™ device that combines a 3-axis user-selectable gyroscope accelerometer. The ICM-40627 comes bundled with TDK’s Air Motion Library that enables precise mouse pointing, swipe, roll and...
Dual Smart USB Charger – your gateway to efficient and versatile charging. With a wide voltage range from 3.5V to a robust 36V, this charger, based on the MAX20047A from Analog Devices, ensures compatibility with various power sources. Achieving an impressive 93% efficiency, delivering up to 3A of charging current per port, and equipped with...
Loading
Load more
Loading
