Filter Product By
Slide and select filter/s
Filtered by
LED Driver 14 Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the BD18337EFV-M, a reliable four-channel constant current LED driver from Rohm Semiconductor. It is powered by an external power supply in the range of 5.5V to 20V, providing a maximum output current of 150mA per channel. The BD18337EFV-M also...
Proximity 17 Click is a compact add-on board that contains a close-range proximity sensing solution. This board features the TMD2635, a miniature proximity sensor module from ams AG. The TMD2635 features advanced proximity measurement in a tiny and thin optical land grid array module that incorporates a 940nm infrared vertical-cavity surface-emitting...
GPS 6 Click is a compact add-on board that provides users with positioning, navigation, and timing services. This board features the A2200-A, a GPS receiver module that enables fast acquisition and tracking with SiRFstar IV technology from Lantronix. This small-form-factor module operates with a frequency of 1,575GHz with accuracy from 2 up to 2.5m and...
CODEGRIP for Kinetis is a fast USB-C programmer and hardware debugger. It supports NXP's popular ARM Cortex-M0/M4/M7 Kinetis microcontrollers.
When the first MIKROE Click board™ was released in 2011, it was the beginning of a decade-long development of the mikroBUS™ standard - our very own standard which is now world-renowned and able to support very many different peripherals. With the mikroBUS™ standard, you can turn any board into a development tool. This T-shirt is for everyone who loves...
Accel 30 Click is a compact add-on board that contains an acceleration sensor. This board features the MC3635, an ultra-low power, low-noise, integrated digital output 3-axis accelerometer from MEMSIC. The MC3635 allows selectable full-scale acceleration measurements in ranges of ±2g, ±4g, ±8g, ±12g, or ±16g in three axes with a configurable host...
Headphone AMP 3 Click is a compact add-on board that contains a stereo headphone amplifier. This board features the INA1620, a high-fidelity audio operational amplifier with integrated thin-film resistors and EMI filters from Texas Instruments. Over its dual amplifiers, it achieves a very low noise density and drives a 32Ω load at 150mW of output power....
6DOF IMU 23 Click is a compact add-on board for precise motion tracking and measurement. This board features the IIM-20670, a high-performance 6-axis MotionTracking device from TDK InvenSense that integrates a 3-axis gyroscope and a 3-axis accelerometer. The gyroscope offers a full-scale range of up to ±1966 dps with high accuracy, while the accelerometer...
VCP Monitor 5 Click is a compact add-on board designed for various applications' precise current, voltage, and temperature measurements. This board features the INA700A, a 16-bit digital power monitor from Texas Instruments based on an advanced EZShunt™ technology for high-accuracy sensing. This board handles full-scale current measurements up to...
H-Bridge 17 Click is a compact add-on board for driving brushed DC motors, solenoids, and actuators. This board features the MP6619L, an H-bridge motor driver IC from MPS, capable of delivering high motor currents while operating from a wide supply voltage range of 2.5V to 28V. This Click board™ features flexible control via mikroBUS™ pins, configurable...
Environment 5 Click is a compact add-on board designed to measure temperature, humidity, and CO₂ levels with high precision. It is based on two high-performance sensors from Sensirion: the SHT40-BD1B for humidity and temperature, and the STC31-C for carbon dioxide concentration. Featuring a low power design, wide operating ranges, and excellent long-term...
Not a programming expert, but you have the talent to build a great user interface? Don't worry! Visual TFT will do the hard job for you. You just focus on the design of you TFT GUIs, and the software will handle the rest.
Ambient 15 Click is a compact add-on board used to measure the amount of the present ambient light. This board features the TSL2584TSV, a very-high sensitivity light-to-digital converter with an I2C interface that transforms light intensity into a digital output signal from AMS-AG. The TSL2584TSV’s near-photopic response produces a highly accurate lux...
Fusion for Tiva v8 is a development board for TIVA ARM architecture devices. It contains many on-board modules necessary for device development, including multimedia, Ethernet, USB, and other.
Magneto 14 Click is a compact add-on board with an accurate and reliable magnetic device. This board features the MA735, a contactless angle sensor with ABZ, and PWM output from Monolithic Power Systems. The MA735 sensor has a 9-bit to 13-bit resolution of the absolute angle encoder. With its fast data acquisition and processing, it provides accurate...
Hall Current 16 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the ACS37002, a 400kHz high-accuracy current sensor from Allegro Microsystems. This sensor features pin-selectable gains that can be used to configure the device to one of the four defined sensitivities and corresponding current...
Current 14 Click is a compact add-on board designed for precise current measurement without direct contact. This board features the BM14270, a magnetic current sensor IC from ROHM Semiconductor. It uses a coreless, non-contact magnetic impedance (MI) sensor, ensuring low power loss and accurate current detection. It communicates through a 2-wire I2C...
Tester 2 Click is a diagnostic Click board™ designed for real-time visual monitoring of mikroBUS™ pin logic levels. It features a 2x6 LED array controlled by SI2310 N-channel MOSFETs, providing reliable feedback on pin states and additional LEDs for monitoring the activity of +3.3V and +5V power rails. The board also includes a ClickID switch for using...
Magneto 6 Click features low power three dimensional Hall effect sensor, TLI493D-A2B6, designed for magnetic sensing applications. It measures the magnetic field in X, Y, and Z direction. Each X, Y and Z Hall probe is connected sequentially to a multiplexer, which is then connected to an Analog to Digital Converter (ADC). Optional, the temperature can be...
Ambient 9 Click is a compact add-on board that contains an integrated ambient light sensing and proximity detector with IR LED in an optical module. This board features the APDS-9160-003, digital ALS, and IR sensing, an IR LED, and a complete proximity sensing solution from Broadcom Limited, that is fit to be used under a small aperture of the devices...
MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have ensured the absolute compatibility between the development board and any of the supported MCUs, regardless of their pin...
Piezo Accel Click is a compact add-on board containing an acceleration sensor based on PE technology. This board features the 820M1-0025, a piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance applications from TE Connectivity. This accelerometer features a stable piezoceramic crystal sealed in a fully hermetic...
AudioAmp 8 Click is a compact add-on board that reproduces input audio signal at sound-producing output elements, with desired volume and power levels. This board features the MA12070, a super-efficient audio power amplifier from Infineon Technologies. This I2C configurable audio amplifier is based on proprietary multi-level switching technology, enabling...
Shutter Click is an adapter Click board™ that can be used to implement an automated capturing function. This Click board™ has one 3.5mm jack connector suitable for a camera connection with which the frame is captured. By combining two mikroBUS™ pins and the VO617A, a high-reliability phototransistor from Vishay Semiconductors used as a camera activation...
Loading
Load more
Loading
