Hello
Has anybody got experience with GLCD (KS0108) in 3.3v system ?
I want to use in my project this GLCD with pic18f67j60 but probably i need a level conventer ( 5V <--> 3.3V) like max3002 or maybe anybody have other solution ?
Regards
Robert
KS0108 in 3.3v system
- You must provide 5V for driving the LCD.xor wrote:The GLCD will probably need 5V to run and to drive the LCD screen (Vee).
- Logic levels should not be the problem.xor wrote:You can't damage a 5V GLCD with 3.3V logic signals. It is also possible that the GLCD can read the 3.3V microcontroller logic signals correctly.
hello
i found solution at this board manual
http://www.mikroe.com/en/tools/lv24-33/
yes - probably it can work without any level transators.
i try my board in next week.
thanks for the help !!!
Robert
i found solution at this board manual
http://www.mikroe.com/en/tools/lv24-33/
yes - probably it can work without any level transators.
i try my board in next week.
thanks for the help !!!
Robert