LV 24-33 Development Board | mikroElektronika

OUT OF STOCK !!! New version here.
System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA010 - PIC24 16-bit Microcontroller, 96 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 100 Pin Package). You can choose between USB or External Power supply. LV 24-33 also supports Character LCD as well as Graphic LCD.

LV 24-33 is easy to use Microchip PIC24F, 24H, dsPIC33F development system. LV 24-33 has many features that makes development easy.

NOTE: LCD, GLCD, DS1820, Serial Cable and MMC/SD Cards are not included in the price !!!

Double RS-232 communication with PC or another microcontroller.

System can be easily configured via clearly marked dip switches.

MMC/SD card connector for data logging application.

System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F MCU's.

4 potentiometers are available for testing AD conversion and comparators.

Power Supply select - USB or external.

3.3 MCU Power Supply - Power Supply is near microcontroller for more stable work.

All pins are connected to IDC connectors for further connecting.

85 diodes for displaying states of all pins on the microcontroller at the same time.

Pull up or Pull down port defining.

85 buttons for program developing needs.

ICD2 connector for In circuit debugger.

Very fast USB 2.0 programmer on board.

LCD display plugs in via a connector on-board.

Selectable contrast :GLCD or for LCD.

LCD display plugs in via a connector on-board.

External power supply can be DC or AC.

Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.

LCD 2x16 in 8-bit mode.

All pins are marked on the back of the board.

Choose voltage level to be applied when a button is pressed (GND or +3.3V).

Soft rubber foot give good connection with the working table.

GLCD - Graphic display 128x64.

Reset circuit

MMC Slot - MMC card is used as storage media for a portable device, in a form that can easily be removed for access by a PC.

When using a character LCD in 8-bit mode, the connector that is shared with the GLCD is used. The character LCD communicates with the MCU via an 8-bit data bus.

The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.

LV 24-33 development system is a full-featured development board for the Microchip PIC24F, PIC24H and dsPIC33Fmicrocontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC24F, PIC24H and dsPIC33F microcontrollers. It allows the PIC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.

Figure on the right illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.

3 in 1 Development Tool - Development Board + USB 2.0 on-board LV 24-33-Programmer + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host PIC24/dsPIC33 microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running.
LV 24-33-Programmer: The microcontroller is connected to the LV 24-33 programmer via 5 lines, two of which are +3.3V and GND. Unlike programmers whose operation is based on bootloads, LV 24-33 programs the microcontroller externally so that the entire memory is available for the program. ICSP mode is a special programming protocol that allows you to read and write to PIC24F/24H/dsPIC33F device family memory. The ICSP interface is a 2-wire serial protocol implemented using the PGC and PGD pins. The PGC pin is used as a clock input pin and the clock source must be provided by the programmer. The PGD pin is used for sending command data to and receiving response data from the programming executive.

LvPICFLASH Programmer Software for Windows [1.2MB]

LvPICFLASH Programmer Drivers for Windows [1.6MB]

mikroPascal for dsPIC examples [1.2MB]

mikroBasic for dsPIC examples [1.2MB]

mikroC for dsPIC examples [2.6MB]

LV 24-33 Manual [2.6MB]

LV 24-33 Manual Hi-Quality [17.3MB]

Installing USB drivers [452KB]

LV 24-33 MCU Card Dimensions [41KB]

A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC. [more]

mikroPascal PRO for dsPIC30/33 and PIC24

Comprehensive, stand-alone Pascal compiler for dsPIC MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]

All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]

AD conversion and displaying on LCD.

AD conversion and displaying on LED
diodes in binary form.

AD conversion and send conversion result via USART.

Timer 0 and time measuring.

Examples for SPI communication.

Examples for CAN communication.

Examples for Sound generation.

Sending and receiving data over Ethernet.

Examples for SPI Port Expander.

Examples for Toshiba T6963 Graphic LCD.

Interrupt upon port B state change.

Detection of button pressed on portB.

Printing text on LCD.

Diodes blinking on port B.

Display text and images on Graphic LCD.

Examples for I2C communication.

Examples for RS485 communication.

Examples for sending and receiving data using Manchester Code.

Examples for Sinusoid generation.

Examples for SPI Graphic LCD.

Measuring temperature with DS1820
and sending data to the PC via serial
communication.

Sending data to the PC via serial
communication.

Creating delay with timer 0.

Creating delay with timer 1.

Creating delay with timer 2.

Sending data from PS/2 keyboard.

Read date and time from PCF8583 RTC Real Time Clock.

Examples for reading and writing data to MMC or CF cards.

Drawings for all dev.system parts are simple and clear.

Package contains:

LV 24-33 development system.

USB cable.

Printed LV 24-33 Users Manual.

CD with software, drivers, board schematic and examples in BASIC, Pascal and C.

The Box is very resistant to shock and transport damage.

NOTE: LCD, GLCD, DS1820, Serial Cable and MMC/SD Cards are not included in the price !!!

LV 24-33 comes with printed LV 24-33 Users Manual.

All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.

$139.00 USD LV 24-33 Development System
OUT OF STOCK !!! New version available here

Optional: