Hi,
could someone explain to me the MCP2517FD config object? Some fields are self explainatory but others sre not. I don't even know, what kind of connection the example sets up. So how would I configure this for 250kbits? An undocumented closed source library is quite difficult to use.
Best Regards,
Torsten
MCP2517 configuration
-
- Posts: 24
- Joined: 18 Feb 2019 15:50
Re: MCP2517 configuration
I will try my luck with MCP2542 and the internal CAN modules.
Cheers,
Torsten
Cheers,
Torsten
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: MCP2517 configuration
Hello,
I recommend you to look at our MCP2517FD click board.
On our LibStock webpage, you can find examples for it, which can help you:
https://libstock.mikroe.com/projects/vi ... 17fd-click
and on the following link, you can find the datasheet:
https://download.mikroe.com/documents/d ... 2517fd.pdf
https://download.mikroe.com/documents/d ... asheet.pdf
If you want, I can send you the source code of this click board.
Kind regards,
Jovana
I recommend you to look at our MCP2517FD click board.
On our LibStock webpage, you can find examples for it, which can help you:
https://libstock.mikroe.com/projects/vi ... 17fd-click
and on the following link, you can find the datasheet:
https://download.mikroe.com/documents/d ... 2517fd.pdf
https://download.mikroe.com/documents/d ... asheet.pdf
If you want, I can send you the source code of this click board.
Kind regards,
Jovana
-
- Posts: 24
- Joined: 18 Feb 2019 15:50
Re: MCP2517 configuration
Hello Jovana,
I tried the example but I could not make a transmission to a CAN-USB adapter on the host computer. The source code would certainly be very helpful to understand which parameters are written to the configuration registers.
Best Regards,
Torsten
I tried the example but I could not make a transmission to a CAN-USB adapter on the host computer. The source code would certainly be very helpful to understand which parameters are written to the configuration registers.
Best Regards,
Torsten
- jovana.medakovic
- mikroElektronika team
- Posts: 986
- Joined: 18 Dec 2018 10:36
Re: MCP2517 configuration
Hello,
I apologize for the delayed answer.
In the attachment, you can find the source code of MCP2517FD click board.
I hope you find this helpful for your project.
Kind regards,
Jovana
I apologize for the delayed answer.
In the attachment, you can find the source code of MCP2517FD click board.
I hope you find this helpful for your project.
Kind regards,
Jovana
- Attachments
-
- library.zip
- (201.38 KiB) Downloaded 184 times
-
- Posts: 1
- Joined: 28 Dec 2019 13:21
Re: MCP2517 configuration
you can checkout this link
http://ww1.microchip.com/downloads/en/D ... 05688B.pdf
http://ww1.microchip.com/downloads/en/D ... 05688B.pdf